| View previous topic :: View next topic |
| Author
|
Message |
original_lollybob
3NE 2NR for life
Joined: 27 Nov 2006
Tech posts: 178
Location: I donno nah...
My 2NRide: Mitsubishi Galant VRG
|
 Posted: Sat Jun 06, 2009 8:32 am
Post subject: |
 |
|
| turbo_beast369 wrote: | | original_lollybob wrote: | expect a fairly high cost for labour from Robert
he is my mechanic and well ive come to expect his prices by now...
i could give u his no. if yuh wanna call him |
I dont mind payin a high cost once I get high quality work the proper way and as close to the books as possibile......gimme an example of a high cost..... |
i tryin to find some receipts buh i cah find anythin these days.. i remember a while back to take apart the entire engine and change all d seals, clean everythin, clean/replace tappits and put everythin back together was bout 2 grand.
but there was odda stuff involved in that stay as well... suspension, brakes etc. |
|
| Back to top |
|
 |
|
|
|
turbo_beast369
Sweet on this forum
Joined: 20 Jan 2006
Tech posts: 335
My 2NRide:
|
Posted: Sat Jun 06, 2009 7:12 pm
Post subject: |
|
|
| venum wrote: | | turbo_beast369 wrote: | | TURBOT I fraid to wash meh engine with all dem sensors...also don't want water gettin into d starter and alternator....water gets into places u can never imagine..... |
yuh don't have to tell me bout water getting into all kinda places, I drive thru teh sea with teh L200 already, I know what yuh mean
I wash teh 4G18 regularly
never had a problem
your alternator and starter suppose to have spaces in them to allow water to drain out in teh advent that it gets wet
| turbo_beast369 wrote: | | venum on average how much it cost from Robert Chan to change yuh cam and crankshaft seals on yuh 4G18....labour alone eh....federal quoted me $800 for the job of changing the cam seal only.....thas with d OEM camshaft seal the labour and other "parts" when I asked him what other "parts" he couldnt answer......so since I done scraping the side cover assembly I go change d crankshaft seal and done one time... |
can't say what his prices are, I did this a while ago
change cam and crank together, labour is more than the OEM parts
u don't need other parts, just teh 2 seals |
what you use to wash ur 4G18 and what method u use....
I know is only the 2 seals I go need but he said "other parts" thas all...but I find $800 rel steep jus for one seal change...i know its a few hours work but still that 2 much....look original_lollybob pay bout 2 grand for engine and suspension job...thas wayyy more work than to just change a cam seal.....the cam seal is bout $90 and well the crank should be around $150 so.... |
|
| Back to top |
|
|
ZeroOne
Sweet on this forum
Joined: 05 Aug 2008
Tech posts: 320
My 2NRide: Mitsubishi Evolution X
|
Posted: Sat Jun 06, 2009 7:58 pm
Post subject: |
|
|
| venum, are you saying that an engine wash is no biggie? |
|
| Back to top |
|
|
ronsin1
I LUV THIS PLACE
Joined: 30 Nov 2005
Tech posts: 1037
Location: bussin' jokes
My 2NRide: Mitsubishi Lancer
|
Posted: Sun Jun 07, 2009 7:57 am
Post subject: |
|
|
I have washed my GDI engine on many ocassions without any problems
With the 4g18 I am bit hesitant to wash |
|
| Back to top |
|
|
turbo_beast369
Sweet on this forum
Joined: 20 Jan 2006
Tech posts: 335
My 2NRide:
|
Posted: Sun Jun 07, 2009 5:48 pm
Post subject: |
|
|
| I was checkin out some sites and I saw some ppl installed the 4G69 Mivec 2.4 that came in the 04' - 06' USDM Ralliart Lancers. This swap is a bolt for bolt swap from the 4G18...but it's costly to get everything working as you need a good bit of parts...but not as costly as buying an EVO lol....if i had d money I would have done it...maybe someday when I get rich.... |
|
| Back to top |
|
|
venum
3NE2NR Diesel Boyz
Joined: 07 May 2004
Tech posts: 3638
Location: San Fernando
My 2NRide: Mitsubishi L200 Animal
|
Posted: Sun Jun 07, 2009 7:59 pm
Post subject: |
|
|
| ZeroOne wrote: | | venum, are you saying that an engine wash is no biggie? |
YES no biggie
did it several times ob both CS3
I would be more afraid of washing a GDI
dunno how ronsin1 backwards so, must be liming with idlemind too much
teh method that teh service station that I go to uses as follows:
let engine cool
spray down engine with degreaser mixture (kerosene, soap, etc)
spray down with water
use compressed air to blow out water
start engine and let idle
drive car for a while after
however the best washes i used to get (place closed down now), procedure
let engine cool
spray with special degreaser only (no kerosene, soap etc)
start car
spray down with water
use compressed air to blow out water
that special degreaser was teh best, u could have eaten off it after |
|
| Back to top |
|
|
idlemind
Riding on 17's
Joined: 15 Aug 2005
Tech posts: 1218
Location: Shifting with no clutching
My 2NRide: Mitsubishi Touring Lancer
|
Posted: Sun Jun 07, 2009 8:05 pm
Post subject: |
|
|
| allyuh like lazy man thing, use allyuh hand and scrub |
|
| Back to top |
|
|
ZeroOne
Sweet on this forum
Joined: 05 Aug 2008
Tech posts: 320
My 2NRide: Mitsubishi Evolution X
|
Posted: Sun Jun 07, 2009 8:36 pm
Post subject: |
|
|
thanks venum i have a GDI so i guess that means no engine wash for me but now that you mention it I never saw how the station does the engine wash.
So idlemind, you mind tellin us how you do your "engine wash"?
OH i also tried the Ds thing you was tellin us to do and it was fun car hit 120 in about 6 seconds, but i realise that as soon as i shift into DS the GDI light went off so it burn some more of my expensive premium gas, but for the spped it worth it. |
|
| Back to top |
|
|
idlemind
Riding on 17's
Joined: 15 Aug 2005
Tech posts: 1218
Location: Shifting with no clutching
My 2NRide: Mitsubishi Touring Lancer
|
Posted: Sun Jun 07, 2009 8:42 pm
Post subject: |
|
|
| idlemind wrote: | nah fellas....advocate of no engine washing here
i jus spray down the MC with WD40, wipe off and spray down again |
thats how^
yeah man after awhile the thrill beats the pocket anyday
glad u had fun, jus be careful.
fellas Ds also assists with braking too
esp when u doing speeds u not supposed to be doing
jus remember to slow down first and not jus slap it into Ds |
|
| Back to top |
|
|
original_lollybob
3NE 2NR for life
Joined: 27 Nov 2006
Tech posts: 178
Location: I donno nah...
My 2NRide: Mitsubishi Galant VRG
|
Posted: Sun Jun 07, 2009 8:44 pm
Post subject: |
|
|
i never had a problem engine washin the service station way either
and i have the blightest GDI engine in d country 
*lookin for some wood to knock on now* |
|
| Back to top |
|
|
venum
3NE2NR Diesel Boyz
Joined: 07 May 2004
Tech posts: 3638
Location: San Fernando
My 2NRide: Mitsubishi L200 Animal
|
Posted: Sun Jun 07, 2009 8:51 pm
Post subject: |
|
|
| original_lollybob wrote: | i never had a problem engine washin the service station way either
and i have the blightest GDI engine in d country |
ever wonder why 
and here we were just thinking that u had it so by saving on Guest House fees |
|
| Back to top |
|
|
original_lollybob
3NE 2NR for life
Joined: 27 Nov 2006
Tech posts: 178
Location: I donno nah...
My 2NRide: Mitsubishi Galant VRG
|
Posted: Sun Jun 07, 2009 8:57 pm
Post subject: |
|
|
| venum wrote: | | original_lollybob wrote: | i never had a problem engine washin the service station way either
and i have the blightest GDI engine in d country |
ever wonder why
and here we were just thinking that u had it so by saving on Guest House fees |
hardy har har  |
|
| Back to top |
|
|
ZeroOne
Sweet on this forum
Joined: 05 Aug 2008
Tech posts: 320
My 2NRide: Mitsubishi Evolution X
|
Posted: Sun Jun 07, 2009 10:45 pm
Post subject: |
|
|
| yea i did notice that Ds assists in braking thats what i use when the car in font just suddenly slows down....i hate when that happens. |
|
| Back to top |
|
|
ronsin1
I LUV THIS PLACE
Joined: 30 Nov 2005
Tech posts: 1037
Location: bussin' jokes
My 2NRide: Mitsubishi Lancer
|
Posted: Mon Jun 08, 2009 6:07 am
Post subject: |
|
|
| original_lollybob wrote: | | venum wrote: | | original_lollybob wrote: | i never had a problem engine washin the service station way either
and i have the blightest GDI engine in d country |
ever wonder why
and here we were just thinking that u had it so by saving on Guest House fees |
hardy har har |
yuh see I knew this was the case all along |
|
| Back to top |
|
|
ronsin1
I LUV THIS PLACE
Joined: 30 Nov 2005
Tech posts: 1037
Location: bussin' jokes
My 2NRide: Mitsubishi Lancer
|
Posted: Mon Jun 08, 2009 6:11 am
Post subject: |
|
|
| venum wrote: | | ZeroOne wrote: | | venum, are you saying that an engine wash is no biggie? |
dunno how ronsin1 backwards so, must be liming with idlemind too much
|
boy after the alternator incident haven't washed engines in both cars |
|
| Back to top |
|
|
turbo_beast369
Sweet on this forum
Joined: 20 Jan 2006
Tech posts: 335
My 2NRide:
|
Posted: Mon Jun 08, 2009 8:15 am
Post subject: |
|
|
Hear what....I heard is mostly kerosene and breeze they does use which is a boss mix...yuh could even throw a lil diesel in it....but then yuh engine go smell diesely....
let soak a lil bit then spray down with a low psi pressure washer.....
mix back some breeze alone and spray and let soak and wash again to get out d oilyness and smell from d kerosene....
take meh air compressor at work and spray at about 80-90 psi every dam drop ah water possible especially by d starter and alternator....
pull out all d electrical clips that I could visually see with my eye...spray with WD40 clip it back then douse down d whole engine with d rest of d can like a mad man...an 11 oz should do it jus right lol....
only that way I go feel safe.....i eh lettin no service station man touch my engine....to me dem fellaz does do a halfway wuk becuz thas not their engine....
who say 4G69 Mivec in their CS Lancers!!!!! I know a fella who brought down a USDM V6 engine for his Shark Mouth Galant.....i'm sure he could source it along with parts... |
|
| Back to top |
|
|
idlemind
Riding on 17's
Joined: 15 Aug 2005
Tech posts: 1218
Location: Shifting with no clutching
My 2NRide: Mitsubishi Touring Lancer
|
Posted: Mon Jun 08, 2009 8:55 am
Post subject: |
|
|
breeze and kerosene??
| Quote: |
take meh air compressor at work and spray at about 80-90 psi every dam drop ah water possible especially by d starter and alternator....
|
u up on a ramp right? coz the starter practically below the car
| Quote: |
pull out all d electrical clips that I could visually see with my eye
|
and what of those you cannot see????
la la la laaaaa
 |
|
| Back to top |
|
|
turbo_beast369
Sweet on this forum
Joined: 20 Jan 2006
Tech posts: 335
My 2NRide:
|
Posted: Mon Jun 08, 2009 9:38 am
Post subject: |
|
|
boi what i seein it what I wetting.....as i say i spraying WD40 like a mad man.....
or and compressor gun have a long extension so I i will get to it dont worry... |
|
| Back to top |
|
|
ZeroOne
Sweet on this forum
Joined: 05 Aug 2008
Tech posts: 320
My 2NRide: Mitsubishi Evolution X
|
Posted: Mon Jun 08, 2009 9:34 pm
Post subject: |
|
|
i dont know anything about my GDI so i ent even going and spray anything like mad. idlemind, where you located yuh might have to give me a tutorial 
so another question *chuckles*,
so ill have to do an oil change in about 6 weeks but right now i have the normal castrol oil with the k&n filter. I want to know if i could switch to full syntethic without changing the filter because the filter would of been in use for only 5000km. |
|
| Back to top |
|
|
venum
3NE2NR Diesel Boyz
Joined: 07 May 2004
Tech posts: 3638
Location: San Fernando
My 2NRide: Mitsubishi L200 Animal
|
Posted: Tue Jun 09, 2009 8:46 am
Post subject: |
|
|
ZeroOne, I'll tap yuh upside teh head first
let idle answer yuh after |
|
| Back to top |
|
|
|
|
|
2NRides
FAQ
Search
Memberlist
Usergroups
Register
Profile
Private Messages
Log in
