4efte problems

[biggreen]

Aye fellz iny idea what could be causing a ct9 turbo 2 spool late? it getting rell bad lag 4 some reason. also i looking 4 some old engine mounts 4 d same engine at a cheap price, i wanna rebuild it.

[reddo_tuner]

turbo might be going , omegajedi have a complete engine for 5K

[biggreen]

if turbo going that is no prob, wanted 2 change but don't wanna change and have same prob..

[haydn28]

yo man check to see if the flange bolts from exaust to turbine are slack or gasket leaking, also check ur manifold to head bolts and gasket, this is a common problem

[xtech]

his manifold must be have a crack

[haydn28]

also do a compression test ( u shud look for values around 135-145 psi)

nex thing make sure u dont have any piping leaks,' good way to check , is to check with car off and cold, blow into the pipe just after turbo discharge throw water to c bubbles ..yes with ur mouth.
then check ur BOV...pull out vacume line leave it out , throw water or Orange soda on the bov and rev the car , if there is air escaping u will c bubbles escaping from bov vent (bad)

[biggreen]

will check these things, but i had lock tight on all these things so i did not double check it, but will do

[shinakuma]

haydn28

[haydn28]

wham d orange soda does wuk bess at night

[biggreen]

foung d prob, had the car by d mec 4 some box work, and someone switched my boost controler lines, and also broke the controler so it kinda sorted out.

[biggreen]

still looking 4 old engine mounts tho

[Aarong420]

fire your mechanic.

[biggreen]

fire is not the word

[foss]

tell him he doesnt have to bother charging u for his work

[skyline01]

the waste gate might be stuck or if you move the intercooler from on top to the front, that might cause the turbo to spool late.