Autronic ecu pin outs

original.badman · Posted: Sun Oct 25, 2009 12:51 pm Post subject: Autronic ecu pin outs

Hey hey, Ive had an early SMC V1.90 sitting under my bed for years, finally getting round to attempting to wire it in...

Autronic's site has been 'coming soon' for about 12 months now. So i really have no clue to which is what (i have a blank loom for it but thats as far as ive gotten)

Its going into a 4AG ae86 - but im going to re-wire the whole engine loom, using none of the 30 year old crapness thats still there

so does anyone have a diagram and is there anything i should look out for wiring it in to an early efi toyota?

red_dragon · Posted: Sun Oct 25, 2009 11:19 pm Post subject:

send them an email

shinaka · Posted: Mon Oct 26, 2009 10:36 am Post subject:

Autronic new site:

http://www.autronic.com.au/

bigtoe · Ricer Joined: 01 Apr 2008 Tech posts: 20 My 2NRide:

The SMC comes with a completed loom. On a 4 cylinder application there are many wires from the loom that will need to be removed from the AMP Connector.
The V1.09 will require a new trigger mechanism for the cyl/pulse and cyl/ref as the older ECU's did not have multi tooth or missing tooth configuration.
CARVtech PC Ltd is the local agent for Autronic. If you need assistance check the web site, get the contacts and give me a call.