how to change samuari ac filter

grasshopper4389 · Posted: Mon Jul 06, 2009 11:36 am Post subject: how to change samuari ac filter

i have a Suzuki samurai and would like to change the ac filter but where is filter because the glove compartment cannot come out if the filter is behind there ? how to start ? thanks

SMc · Posted: Mon Jul 06, 2009 12:14 pm Post subject:

check these link to see if you can get any further

http://www.suzuki-forums.co...replace-cabin-filter.html

ssankar · Posted: Mon Jul 06, 2009 2:12 pm Post subject:

1) Remove valve cover. Rotate engine until zero degree (TDC) timing mark of timing belt cover is in line with timing mark on crankshaft pulley. See Fig. 1.
2) Ensure cylinder No. 1 is at TDC on compression stroke. Remove distributor cap. On Samurai and Sidekick (TBI), ensure rotor is pointed upward at distributor hold-down bolt and to No. 1 terminal of distributor cap. On Sidekick (MPI), ensure rotor is at about 1 o’clock position and pointed to No. 1 terminal of distributor cap. If rotor is not as described, rotate crankshaft 360 degrees.
3) Measure valve clearance between adjustment screw and valve stem using shim thickness gauge. Check intake valve clearance of cylinders No. 1 and 2 and exhaust valve clearance of cylinders No. 1and 3. See VALVE CLEARANCE SPECIFICATIONS table.
4) Turn crankshaft one complete revolution (360 degrees). Check intake valve clearance of cylinders No. 3 and 4 and exhaust valve clearance of cylinders No. 2 and 4.
5) Adjust valves by loosening lock nut and turning adjusting screw until clearance is as specified.

grasshopper4389 · Posted: Mon Jul 06, 2009 2:53 pm Post subject:

i think you have the wrong idea ,its the a/c filter in the majority of vehicles the filter is at the back of the glove compartment box but the samurai glove box cannot come out ??? where is the filter and how do i get access to it

ssankar · Posted: Mon Jul 06, 2009 7:58 pm Post subject:

oh sorry..this info is for the suzuki swift..forgot it was samurai