#882: Author: idlemind, Location: Shifting with no clutchingPosted: Tue Apr 29, 2008 8:16 am
#883: Author: ronsin1, Location: bussin' jokesPosted: Tue Apr 29, 2008 8:59 am ah still lookin' black
#884: Author: idlemind, Location: Shifting with no clutchingPosted: Tue Apr 29, 2008 9:02 am why yuh think i wear a white polo???
#885: Author: fras, Location: TobagoPosted: Tue Apr 29, 2008 7:08 pm Hold it down idle
#886: Author: aviboy, Location: St AugustinePosted: Tue Apr 29, 2008 8:32 pm For the CVT tranny... what mileage to change oil at??? Any special belts may need to change etc?
#887: Author: fras, Location: TobagoPosted: Wed Apr 30, 2008 1:09 am aviboy @ 20,000K and use the correct grade
#888: Author: ArabKing2, Location: TobagoPosted: Wed Apr 30, 2008 7:31 pm Hey can 4G92 mods work on a 4G18 engine?
#889: Author: aviboy, Location: St AugustinePosted: Wed Apr 30, 2008 7:37 pm every 20,000???
#890: Author: ronsin1, Location: bussin' jokesPosted: Wed Apr 30, 2008 7:40 pm yes thats right 20,000 use mitsubishi SPIII
#891: Author: aviboy, Location: St AugustinePosted: Wed Apr 30, 2008 7:56 pm well the car i bought was serviced by DM... Doing 65000 km... las sevice from there was 55000... then i should change the cvt fluid??? Were do i get the cvt fluid? how much to buy??? i hav been hearing these trannys mashin up alot... das true?
aviboy 20,000km... 5 Qrts should do.
I had mine almost 2yrs no probs with the tranny!
Sho, Venum & Idle would better tell u where to get the tranny fluid there
#893: Author: idlemind, Location: Shifting with no clutchingPosted: Wed Apr 30, 2008 8:32 pm Thanks fras...had a ball at dex
aviboy, i suggest u do a oil change, what will it hurt?
the CVT trannies hold out good IMHO, and i run the gears up in tiptronic
cant go wrong with an external tranny cooler (use search)
and check out the first post on Page 1 of this thread for shops
um off the bat, ESAS or Autorama....hold for venum or ronsin1, for south locations
#894: Author: aviboy, Location: St AugustinePosted: Wed Apr 30, 2008 8:53 pm I gotta tune up... wat kinda mileage allyuh fellas getting? AND wat GAS allyuh using??
#895: Author: idlemind, Location: Shifting with no clutchingPosted: Wed Apr 30, 2008 9:26 pm premium ONLY
i get 300 km on a full up from gas light
im always in traffic, and if not i drive real spirited
lancer is a 1.8 and tiptronic, both of which hard on fuel economy by itself
#896: Author: ArabKing2, Location: TobagoPosted: Thu May 01, 2008 7:04 am Mods like extractors and gearbox of the 4G92. Would they work ?
#897: Author: ronsin1, Location: bussin' jokesPosted: Thu May 01, 2008 7:37 am murads in marabella $65 ah quart abt ah year aback not sure if they raised it
Federal on ciepro street $69.00 ah quart just recently (oil change with machine using the SP III will cost you $675.00, and using the new mitsubishi oil will be in the range of $1200.00)
#898: Author: aviboy, Location: St AugustinePosted: Thu May 01, 2008 8:13 am any other views on the gas to use???
#899: Author: DJ Kaotic, Location: Eastside!!! Biatches!!Posted: Thu May 01, 2008 8:30 am Only use premium if u have to use super , use an injector cleaner (dunno if it would be the same for GDI's,) if its GLX like mine.
I use Red Line additives after every 3 Full ups. If you in d east u can check Ramcharans Parts place on Pasea road he has the Tranny fluid SPIII for $63. And i change my fluid regularly, due to running 18" chromes it puts a slight strain on the tranny, good thing i don't drive "spirited" eh idlemind.
How easy is it to install a Tranny cooler? and where is the best mounting place for it ?
#900: Author: idlemind, Location: Shifting with no clutchingPosted: Thu May 01, 2008 9:16 am DJ Kaotic, ur 18s carries its own strain, i runnin some light 16" momos
Quote:
How easy is it to install a Tranny cooler? and where is the best mounting place for it ?
this i have not investigated personally, but i know venum had one installed but like we have to invite them back here, i believe it mounts to ur radiator and takes over (or adds to) the two hoses that goes to the tranny.
i think its sumtin generic too so it should be easier and cheaper to install
i think theres an entire thread here in the mitsu forum on it...use search