trinituner.com :: View topic - need gauge help. crossbread probs

through

[^/[Print]\]

trinituner.com -> TECH STUFF

#1: need gauge help. crossbread probs Author: vans, Location: where ever d $ is

Posted: Wed Jun 24, 2009 4:54 pm
—
ok don't be disgusted but i have a sr20 vvl neo in a vrg sharkmouth. the problem is that the speedometer on the dash does not display the correct speed. the guy that hook it up run an external one into my glove box which shows the actually speed. i find this kinda scrubby so can i get it programmed into the dash or atleast what gauge can i buy and put on my dash to add some class. also what is the price and where doees installation.

also the gear on the dash is always neutral it doesn't show actually gear in use can this also be fixed. i acquired and i heard that is what happens when mitsu an nisssan is crossed but there must be a way. please help

#2: Author: vans, Location: where ever d $ is

Posted: Thu Jun 25, 2009 3:01 pm
—
can anyone assist me

#3: Author: dregz,

Posted: Sat Jun 27, 2009 1:39 pm
—
yow vans, what's ur area?
i may have someone to send you by

#4: Author: Aaron 2NR, Location: 1st Place (DLS) IASCA Open Class

Posted: Sat Jun 27, 2009 1:58 pm
—
do up a lil custom cluster because you would have a lot of problems tryin to get the nissan sensors to work accurately with that panel

Click for full-size.

#5: Author: dregz,

Posted: Sat Jun 27, 2009 4:09 pm
—
^^daz d rel ting there man^^

#6: Author: vans, Location: where ever d $ is

Posted: Sat Jun 27, 2009 4:20 pm
—
i from arouca

#7: Author: vans, Location: where ever d $ is

Posted: Sat Jun 27, 2009 4:22 pm
—
how much for a gauge like them? AND WHO DOES DO THEM THING

#8: Author: Aaron 2NR, Location: 1st Place (DLS) IASCA Open Class

Posted: Sat Jun 27, 2009 7:58 pm
—
you would need to buy the individual gauges and get someone who good with fiber glass or a machine shop to make up the console for you

#9: Author: vans, Location: where ever d $ is

Posted: Sat Jun 27, 2009 8:06 pm
—
what gauges do i need please list as well as prices and what do you recommend

#10: Author: Tired Accord, Location: In de 'Guanas trying to finish meh friggin house!

Posted: Sat Jun 27, 2009 8:49 pm
—

vans wrote:

what gauges do i need please list as well as prices and what do you recommend

Cuz - chances are that other gauges on the original panel for the car may not work properly as well. Aside from speed - your RPM and Temp gauges could be off too. The nissan sensors and brain may have different calibrations and voltages that may not work with the Mitsu gauge electronics?

Your best bet would be to get separate gauges for these. Do some research. The internet is your friend. You also need to consider what about the other tell tale lights on the dash? Oil, batt, check engine..etc.

Alternatively - you can try to see if a Primera - or other Nissan gauge panel will fit.

#11: Author: dregz,

Posted: Sat Jun 27, 2009 9:15 pm
—
well, check around for gauges that u like, i like awoosh gauges, use the internet and search the more popular one, swoosh not bad on price either. like the above guy said, water temp, oil, and current in addition to the ones that not working.

#12: Author: azoturbo, Location: in yuh mamy bed

Posted: Sun Jun 28, 2009 1:45 am
—

dregz wrote:

well, check around for gauges that u like, i like awoosh gauges, use the internet and search the more popular one, swoosh not bad on price either. like the above guy said, water temp, oil, and current in addition to the ones that not working.

remember what the guy said what about yuh warning lights like(battery,oil,check engine etc etc)

#13: Author: Aaron 2NR, Location: 1st Place (DLS) IASCA Open Class

Posted: Sun Jun 28, 2009 11:22 am
—

azoturbo wrote:

dregz wrote:

remember what the guy said what about yuh warning lights like(battery,oil,check engine etc etc)

well just buy some gauges like the prosport with warning lights....im sure you can do up a nice custom panel with aftermarket led's to symbolize right turn, left turn, high beam.....

#14: Author: vans, Location: where ever d $ is

Posted: Sun Jun 28, 2009 4:43 pm
—
will shop around

#15: Author: THE SYNDICATE, Location: Drowning My Sorrows With a Cold HEINEKEN....

Posted: Tue Jul 07, 2009 7:08 am
—

Aaron 2NR wrote:

do up a lil custom cluster because you would have a lot of problems tryin to get the nissan sensors to work accurately with that panel

Click for full-size.

nice idea! looks real neat!

#16: Author: ssankar, Location: Wasteland

Posted: Tue Jul 07, 2009 8:12 am
—

Aaron 2NR wrote:

you would need to buy the individual gauges and get someone who good with fiber glass or a machine shop to make up the console for you

yep just tell them what you want...preferably someone who is adept with fibreglass.

#17: Author: ripit,

Posted: Fri Jul 31, 2009 8:22 pm
—

Aaron 2NR wrote:

do up a lil custom cluster because you would have a lot of problems tryin to get the nissan sensors to work accurately with that panel

Click for full-size.

This real dread feller, need to do this, I did a ga15 conversion in an Opel Astra,for one the water temp does not work and also the tach, using external ones, but these pics is the real sheit.

#18: Author: vin123, Location: 64°45′4″N 147°21′7″W

Posted: Fri Jul 31, 2009 9:01 pm
—
sweet lol

#19: Author: subzerounlimited,

Posted: Sat Aug 01, 2009 9:52 am
—

vin123 wrote:

sweet lol

#20: Author: kurpal_v2, Location: shaking down my bhaji tin

Posted: Sat Aug 01, 2009 10:05 am
—
Ive got a buddy who maybe able to create that cluster but he is from south.

He can do it in carbon fiber, plexi and fiberglass from what I understand.

Give him call- ryan 362-2814, tell him boom sent you.

Wink

trinituner.com -> TECH STUFF

output generated using printer-friendly topic mod. All times are GMT - 4 Hours

Page 1 of 1