trinituner.com :: View topic - front stage help

through

#1: front stage help Author: threeplumes,

Posted: Sun Jun 21, 2009 4:08 pm
—
would it be better to use a cheap component set or buy a good priced coaxial set $500 to $700.

#2: Author: evolution7tt,

Posted: Sun Jun 21, 2009 5:56 pm
—
Check the forums for a good used component set at the price you're looking at. Or check Exonic.

#3: Author: X_Factor, Location: St. Augustine

Posted: Sun Jun 21, 2009 7:49 pm
—
state the brands and model of choice...u might be better advised

#4: Author: audiopipe,

Posted: Sun Jun 21, 2009 8:30 pm
—
check out my post
i have a set of q line an reference components for $2400 excellent condition

#5: Author: threeplumes,

Posted: Sun Jun 21, 2009 8:43 pm
—
not sure yet......what type of coaxials can i get for $700. but on the component side,i could get MB QUART formula series, powerbass c6..........

#6: Author: fuzz_174, Location: Eastern Afghanistan

Posted: Sun Jun 21, 2009 9:18 pm
—
I have a brand new pair of Boston components, comes with crossovers as well $900

http://forums.trinituner.com/forums/viewtopic.php?t=252663

#7: Author: threeplumes,

Posted: Mon Jun 22, 2009 5:02 pm
—

fuzz_174 wrote:

I have a brand new pair of Boston components, comes with crossovers as well $900

http://forums.trinituner.com/forums/viewtopic.php?t=252663

will think about it....but what about the coaxials ppl

#8: Author: slow323, Location: pos, maraval

Posted: Mon Jun 22, 2009 5:16 pm
—
good coaxials would have the passives built on i mean you would see them by the terminals
but i myself have been looking on the forums and it really looking like you go come out better price wise with components the good hi quality coaxials are expensive

#9: Author: Soundstream_626, Location: san juan

Posted: Mon Jun 22, 2009 7:13 pm
—
comps have more flexibility

coaxials usually only have 6db filters and the only coax i ever saw with a lpf for the mid built onto the unit is the alpine type r coaxes

there are passives that can masquerade as coaxes with the tweeter being able to screw onto the middle of the mid but

i would say buy a pr of comps ... ud get better crossover filtering as well as level adjustment and even tweeter protection on some models

fuzz have a bess deal there ... take it and run bostons are great

#10: Author: Exonic, Location: Marabella, Trinidad and Tobago

Posted: Mon Jun 22, 2009 7:49 pm
—
CDT Audio, Alpine Type S, R, X, Bravox, DLS and others.

Component sand coaxials

734-5350

Please call to set up an appointment to view.

Location: Marabella

#11: Author: Aimar,

Posted: Mon Jun 22, 2009 9:59 pm
—
At that price range you will be better of with a set of entry line comps.

I think richepooh has a set of boston SL comps for $800 (used), but at that price you can't go wrong Exclamation

Even the entry line Boston's that Fuzz has will be well worth your while.

#12: Author: silent_riot, Location: Gone digital

Posted: Tue Jun 23, 2009 10:35 am
—
Comps for flexibility in installation. But once you install them okay, coaxials sound good too.

#13: Author: (...Rovin...), Location: Chaguanas

Posted: Tue Jun 23, 2009 10:52 am
—
i prefer comps ...

#14: Author: kurpal_v2, Location: shaking down my bhaji tin

Posted: Tue Jun 23, 2009 8:53 pm
—

silent_riot wrote:

Comps for flexibility in installation. But once you install them okay, coaxials sound good too.

X2.. Ive yet to be failed by my dls 126. But WRT staging, compts rock!!.

#15: Author: SR,

Posted: Tue Jun 23, 2009 9:01 pm
—
DLS B6 components $675

Woofer size 16,5 cm / 6,5"
Power handling capacity 50 W RMS / 80 W max / 150 W peak power
Tweeter 16 mm / 0,63"
Frequency range 50-18.000 Hz
Crossover point (Hz) 6000 Hz
Sensitivity 91 dB (1W/1m)
Outer diameter of woofer 165 mm / 6,5"
Magnet size 80 mm / 3,15"
Crossover Cable filter with 12/12 dB slope (LP/HP)
Size of filter box 60 x 30 x 30 mm (2,36 x 1,25 x 1,25")
Mounting depth 63 mm / 2,48"
Mounting hole 146 mm / 5,75"
Impedance 4 ohm

http://www.dls.se/en/car/prod.html?produkt=en_50

#16: Author: SR,

Posted: Tue Jun 23, 2009 9:04 pm
—
DLS 226 coaxial $530

Tweeter 16 mm (0,63")
Crossover Cable filter with 6/12 dB slope (HP/LP)
Woofer size 16,5 cm (6,5")
Power handling capacity 50 W RMS / 80 W max
Frequency range 50 - 20.000 Hz
Sensitivity 92 dB (1W/1m)
Outer diameter of woofer 165 mm (6,5")
Magnet size 80 mm (3,15")
Mounting depth 52 mm ( 2")
Mounting hole 145 mm (5,7")
Impedance 4 ohm

http://www.dls.se/en/car/prod.html?produkt=en_84

#17: Author: threeplumes,

Posted: Tue Jun 23, 2009 9:23 pm
—

SR wrote:

DLS B6 components $675

Woofer size 16,5 cm / 6,5"
Power handling capacity 50 W RMS / 80 W max / 150 W peak power
Tweeter 16 mm / 0,63"
Frequency range 50-18.000 Hz
Crossover point (Hz) 6000 Hz
Sensitivity 91 dB (1W/1m)
Outer diameter of woofer 165 mm / 6,5"
Magnet size 80 mm / 3,15"
Crossover Cable filter with 12/12 dB slope (LP/HP)
Size of filter box 60 x 30 x 30 mm (2,36 x 1,25 x 1,25")
Mounting depth 63 mm / 2,48"
Mounting hole 146 mm / 5,75"
Impedance 4 ohm

http://www.dls.se/en/car/prod.html?produkt=en_50

i feel i going with this... Cool

#18: Author: insane37,

Posted: Tue Jun 23, 2009 11:12 pm
—
^^^^^^
dats d nice set there.

the comps fuzz has are really good and thats a real bess price too.

trinituner.com -> I.C.E.

output generated using printer-friendly topic mod. All times are GMT - 4 Hours

Page 1 of 1