trinituner.com :: View topic - WTK 2zz and 20v tranny

through

#1: WTK 2zz and 20v tranny Author: TRDcorolla, Location: living in ah age where a pizza reaches my house b4 the police does

Posted: Fri Jun 12, 2009 11:15 pm
—
asking for a fren

fellas he have a 2zz auto, but the valve body is going, and finding a 2zz 6wd gear box and converstion is seeming to be alot right now...... i read on other fourms that the 4age tranny is the same only different is the bell housing..... is this ture and would he be able to use a 4age tranny until he have the cash to get a good working 6wd box and can afford the swap

also the 7th gen celica (gts 2000+ model) are the shocks the same as the corollas ?)

thanks for any helpful information................... any negative comments would jus show how much of an ass some of u are

#2: Author: Zeriam, Location: Morvant

Posted: Sat Jun 13, 2009 1:06 am
—
its 20v box he can use if he changes bell housing. i dont know about the tranny

#3: Author: buzz, Location: FL studio 8 b1tches !!1!

Posted: Sat Jun 13, 2009 2:38 am
—
*negitave comment*

#4: Author: corollalover101, Location: Giving the more fortunate a reason to be emotional

Posted: Sat Jun 13, 2009 9:15 am
—
if the valve body is going has he considered a rebuild? He could check places like Chaguanas Auto Supplies or Jenton

#5: Author: Anton,

Posted: Mon Jun 15, 2009 8:21 am
—
The rebuild at a proper tranny shop would imo be the better option. Chaguanas Suto Supplies is an authorized distributor for toyota parts.

#6: Author: TRDcorolla, Location: living in ah age where a pizza reaches my house b4 the police does

Posted: Wed Jun 24, 2009 6:20 pm
—
by chance, does any one know how much a 2zz gear box and the full swap may cost....even a rough price would be helpful

#7: Author: trdboy,

Posted: Wed Jun 24, 2009 6:34 pm
—
full swap as in shifters cables, shifter,pedals,fluid reservoir, lines,mounts, pressure plate,flywheel,clutch,fabrication,installation fees and the price of gearbox will cost over 10k........now daz in an ideal situation.....now the pressure is to find the box as well as the other parts to go with it!! just pay the popo a lil thing and go see what u could salvage from the import lot from the gts up in town that covered in moss!!

#8: Author: TRDcorolla, Location: living in ah age where a pizza reaches my house b4 the police does

Posted: Wed Jun 24, 2009 6:41 pm
—

Quote:

just pay the popo a lil thing and go see what u could salvage from the import lot from the gts up in town that covered in moss!!

wish it was so easy..

#9: Author: TRDcorolla, Location: living in ah age where a pizza reaches my house b4 the police does

Posted: Thu Jun 25, 2009 1:27 am
—

Quote:

installation fees and the price of gearbox will cost over 10k........

its a good thing i found out that the c160 box from the 20v would work, just have to change the bell housing......... hmm how much those going for these days

#10: Author: trdboy,

Posted: Thu Jun 25, 2009 10:18 pm
—
^^^^ lol!!! boy that like gold too!!! u getting them with a front cut bzr levin the trouble is u have to buy the whole setup or atleast engine and box cuz nobody gona break that, a next thing to consider is where u getting the c161 gearbox bellhousing to go with it??

#11: Author: tte, Location: Trinidad

Posted: Fri Jun 26, 2009 1:09 pm
—
The 4age box is not the same. and no the celica shocks or springs will not work on the rolla. the 20v box has different ratios and different internals and i doubt the bell housing will be interchangeable. The 5 speed for the 1zz will work, so you can try find that.

#12: Author: TRDcorolla, Location: living in ah age where a pizza reaches my house b4 the police does

Posted: Fri Jun 26, 2009 6:22 pm
—
tte ive been talking to a few guys on newcelica.org, they said that the 5fwd from the 1zz works like sheit when on the 2zz engine, and currently one of them put in the 20v 6wd and from wat he said the 20v box is working way better than the 1zz

#13: Author: trdboy,

Posted: Fri Jun 26, 2009 7:56 pm
—
the shocks will not work by itself, the gts came with super strut suspension II how different its from the sss I dont know, but right now on my ae111 trueno i am using the sss from the st205 celica and its bolt on no problems, the only problem would be if i were using the celica hub where the abs housing is smaller! i dont know if the sss II however will be able to work on the ae chasis but if u gona try u will have to get the whole suspension,all the linkage because the shock is designed in a way where everything is mounted together!!

this forum has great pics of the setup check it out

http://www.newcelica.org/forums/showthread.php?t=217930

#14: Re: WTK 2zz and 20v tranny Author: comutech,

Posted: Tue Jun 30, 2009 12:30 am
—
Quick question how did your friend know that the tranny was going??

#15: Author: corollalover101, Location: Giving the more fortunate a reason to be emotional

Posted: Tue Jun 30, 2009 7:42 am
—
^^having driven the car yesterday, I'm now wondering he same thing

#16: Author: tte, Location: Trinidad

Posted: Tue Jun 30, 2009 9:23 am
—
I suggest you change the fluid first and see. For that matter maybe you should change all the fluids.

#17: Author: corollalover101, Location: Giving the more fortunate a reason to be emotional

Posted: Tue Jun 30, 2009 9:30 am
—
tte, same advice I gave him, change all fluids, as the new owner he should start his own maintainence schedule, and considering the RPMs he wants to do coupled with solodexing an external tranny cooler couldn't hurt

#18: Author: TRDcorolla, Location: living in ah age where a pizza reaches my house b4 the police does

Posted: Tue Jun 30, 2009 9:49 am
—
thanks for the advice......... and after cl101 drove the car and said nothing seems to be wrong im leading to think that we jus expected more out of it,

Quote:

Quick question how did your friend know that the tranny was going

the gears were going in hard and b4 3rd goes it takes a while, bounce on the rev limiter about 3-6 times....also it barly builds rpm in 3rd and doesnt seem to go in lift...............the guys at TTTL said it cld be the valve body

but would change all the fluids and service the engine and give an update

trinituner.com -> TOYOTA

output generated using printer-friendly topic mod. All times are GMT - 4 Hours

Page 1 of 1