#21: Author: subzero8714, Location: movantPosted: Wed Jul 01, 2009 1:25 pm — i need the harness side plug to see exactly which wire goes where, its a female, my sensor already has the male plug, they can connect together only 1 way. soldering the wires is what i wanted to do, but either the colour configuration is wrong or who ever wired the engine did it wrong or something. i called m tech, he said the harness sold already.
by the way thanx for your patience and all your help so far, this is my first time owning a toyota and first time with fuel injectors, sensors etc. so im now learning
#22: Author: Hook, Location: Wondering why that fag is so obsessed with getting access to my facebook.Posted: Wed Jul 01, 2009 2:43 pm — thas cool man, we all brothers in this Toyota ting and none of us started out knowing what we know just like that...we're willing to help where we can
I have a harness that I used to trace wires and pull plugs from when I was re-wiring mine properly but I lent it to CorollaGT a couple years ago and never saw it since....and he's the hardest man to get in contact with on the forums
if I get thru with it, the socket's all yours....it's just a matter of getting it back
#23: Author: subzero8714, Location: movantPosted: Mon Jul 06, 2009 12:42 pm — well if u get it back i'll appreciate it thanx. in d meantime i finally figured out which wire goes where, but this is whats happening, when i start the car and let idle till temp gauge reach half, ( have a pro sport analog a/f gauge, smoke series ) by the way, a/f gauge reading constant dead lean, no movement of needle, when ah start driving needle slowly goes to optimal, normal driving, x to board it goes up dead rich, after that i will let it idle and it will slowly go back down to dead lean and stay there until ah start driving again. i know its reading wrong, what u think?
