wtk... loud pop..

shastri · Posted: Wed Oct 28, 2009 11:17 pm Post subject: wtk... loud pop..

guys i`ll like to have some help here..

i`ve got a pioneer 4100
soundstream 7x0
audio logic 600 watts powering.. 2 8`` betas 8A.
power acoustic 1200 watts 4 channel pushing 1 12`` american bass dx..

rca`s are stinger & kenwood.
power wires are 4Guage..

THE PROBLEM IS THAT WHEN SWITCHING OFF THE CAR I HEAR A LOUD **POP**....

CAN ANY1 SUGGEST SOME IDEAS TO PREVENT THIS FROM HAPPENING...

Ginxdor · Posted: Thu Oct 29, 2009 12:54 am Post subject:

It could be that the amp is not a "silent" turn off/on.

southside connections · Posted: Thu Oct 29, 2009 6:42 am Post subject:

do you have a turn on relay installed on the remote liine?

jeepers · Posted: Tue Dec 08, 2009 11:23 pm Post subject:

having the same problem. i realise it happens with certain head units..
i suspect it can be remote or the amp itself?

pioneer · Posted: Thu Dec 10, 2009 6:46 pm Post subject:

Most of the time it's the grounding...had similar problem...i'll never use seatbelt bolt as a ground in my life again

silent_riot · Posted: Fri Dec 11, 2009 8:32 am Post subject:

Yes, check your grounds from the headunit RCAs all the way to the amps.

pugboy · Posted: Fri Dec 11, 2009 11:31 am Post subject:

try shorting the inputs of the various parts with shorted rca plugs and see if it still happens to do a process of elimination
start from the frontest piece of equipment eg eq then move back to amps

Sully · Posted: Sat Dec 12, 2009 9:59 am Post subject:

See if any information from this thread can be of assistance.

http://forums.trinituner.com/forums/viewtopic.php?t=232514

certified_dealer · Posted: Sat Dec 12, 2009 10:22 am Post subject: