WTK. Distributer Problems

type_r_teggy · Posted: Thu Sep 25, 2008 10:29 am Post subject: WTK. Distributer Problems

wat could cause thw module in a dizzy to "go bad" often?
could it b a short in the harness?
or problem in the distributer itself?

or and i need an orginal module 2, to buy.... :roll:

red_dragon · Street 2NR Joined: 08 Apr 2004 Tech posts: 84 My 2NRide:

could be
coil
ecu
wiring
and error codes ?

type_r_teggy · Posted: Thu Sep 25, 2008 1:11 pm Post subject:

ok i had the same problem b4 n i changed the module n it worked fine, n dat was like ah month or 2 ago. no error codes, i hav an msd blaster coil 3 months old installed...

red_dragon · Street 2NR Joined: 08 Apr 2004 Tech posts: 84 My 2NRide:

the ecu stock

sometimes with aftermarket when the dwell set to high the module or coil can fry

other than that the dizzy have to change

type_r_teggy · Posted: Thu Sep 25, 2008 2:09 pm Post subject:

IS THERE ANY DIFFERENCE BETWEEN B16 AND B18c DIZZYS?
OR IT COULD WORK NORMAL?

red_dragon · Street 2NR Joined: 08 Apr 2004 Tech posts: 84 My 2NRide:

once is the correct OBD must match ecu stock for stock ...

type_r_teggy · Posted: Thu Sep 25, 2008 2:21 pm Post subject:

YEA OBD MATCHIN
BUT I REALLY DONT WANT TO GO N BUY IT N IT'S NOT DAT WAT CAUSIN THE PROBLEM...

red_dragon · Street 2NR Joined: 08 Apr 2004 Tech posts: 84 My 2NRide:

only other person to check is X2 get the take from him

type_r_teggy · Posted: Thu Sep 25, 2008 2:38 pm Post subject: