VQ boys......parts, problems, upgrades, swaps, boost

A33_VQ35 · Posted: Mon Oct 27, 2008 9:54 am Post subject:

Acceleration... eh get a chance 2 top it yet.... never on de highway at a opportune time. Will tell u this though, if i leave the OD off an run it out i will reach 200K by the time i hit redline... proved it already Smile

the gears hold longer, if i run it like a manual in each gear i could get close to 80K in first, 140 in second an 200 in third.... all proven eh...

cacasplat3 · Posted: Mon Oct 27, 2008 10:57 am Post subject:

^^^^thats way different from what i get on the 2.0 Confused

then the ratios u have would be higher to compensate for more power...
1st i get 60-65, 2nd 110 max. 3rd about 170....never ran it out after that...but i suspect about 225-230.....will need more power to know Laughing

A33_VQ35 · Posted: Wed Nov 26, 2008 3:07 pm Post subject:

yeah fellas ah back....

Ah break meh first axle Crying or Very sad

Stress we.

EL JEFE · Posted: Wed Nov 26, 2008 3:26 pm Post subject:

^ ^ ^Confirmed?

A33_VQ35 · Posted: Wed Nov 26, 2008 4:38 pm Post subject:

^^ Yeah. Not the shaft though. It's the cage that break.

cacasplat3 · Posted: Wed Nov 26, 2008 6:59 pm Post subject:

too much traction??????
or too little power Laughing

A33_VQ35 · Posted: Wed Nov 26, 2008 8:39 pm Post subject:

^^ i eh know nah cause it break at 180 Embarassed

~˜VëgÅ²˜~ · Posted: Wed Nov 26, 2008 8:47 pm Post subject:

^^^what

pics?

cacasplat3 · Posted: Wed Nov 26, 2008 9:20 pm Post subject:

sheit

accelerating?
were there any signs that it was bad?.....

seems strange that it would break at suck a high speed.......cuz usually there isnt a lot of torsional stress on the shaft one its up and running........

hold on........yuh using the 2.0 axles or the 3.5's?

A33_VQ35 · Posted: Thu Nov 27, 2008 12:38 am Post subject:

^^ yeah it real strange, i thought de tranny i now rebuild had gone cause it was makin a LOUD noise when it happen. I was runnin hard as usual but 4 it 2 break at that speed, kinda weird. I would more expect it 2 happen when i launch the car. The tranny guy say something bout a snap ring that came loose an cause it 2 shift or come out of place on the inner axle.

Goin 2 check on it tomorrow an see if it could fix. I usin the 2.0 axles.

cacasplat3 · Posted: Fri Nov 28, 2008 10:49 pm Post subject:

have that sorted out.........
know of a guy in a FWD who came very close to death cuz of a broken axle......it dug into the road and jack-knifed the car Shocked

you should use the 3.5's axles if its possible......u might get more trouble later on....

Chiney · Posted: Sun Jul 26, 2009 12:02 am Post subject:

bump!!

still got those a32s and a33s guys and gals ??

cacasplat3 · Posted: Sun Jul 26, 2009 1:10 pm Post subject:

mine was up for sale...wanted 75K flat........but held on to it.....may sell next year......soo far nothing new done to it....i hardly even drive the car..............but it pulls as strong as ever Razz

~˜VëgÅ²˜~ · Posted: Sun Jul 26, 2009 1:43 pm Post subject:

thread's aliiiiiveeee........lol.........well my teana is down for a bit. The regulator/rectifier is malfunctioning, so car is down, awaiting the part.......however I getting a japanese alternator for it (NEW) for $2500, while the part I'm waiting for from motorist is like over $2700........decided to try the new alt which I should get by monday.

Spent some money on this car in the past few months.........$3800 for 3 door actuators and exhaust bracket, $2700 for a pair of led door mirrors (driver's mirror was smashed off by a truck and that was costing $2300 for one side from motorist).......so I brought in a pair.....

Here's some pics.......

Passenger side

Click for full-size.

Driver's side

Click for full-size.

Some front shots....

Click for full-size.

fixed a broken bumper that a stupid dog decided to run straight into it.....and I got to buy rear shocks and new tyres or rims/tyres.........lawwwwddddd

cacasplat3 · Posted: Sun Jul 26, 2009 10:11 pm Post subject:

those mirrors SICK!!!!!! Razz

i like them Mr. Green

seems like u need a bush bath Neutral

BTW why u changed the door lock actuators?

Chiney · Posted: Sun Jul 26, 2009 11:12 pm Post subject:

ohhhh!! thats sexy!!

new kyb shocks and springs goin in this week.

other than that..car runs great

bought myself a y11 as my personal pet..so im tryin my best with it.

doin a system in it at the moment...

dual 15s

~˜VëgÅ²˜~ · Posted: Mon Jul 27, 2009 2:03 pm Post subject:

Chiney · Posted: Mon Jul 27, 2009 2:09 pm Post subject:

thats why they were so costly..

damn !

Chiney · Posted: Mon Jul 27, 2009 2:15 pm Post subject:

question to vega:

is it like that in the a32 a33 and JK ciferos?

cacasplat3 · Posted: Mon Jul 27, 2009 2:37 pm Post subject:

i just checked my service manual....the A33 uses mechanical rods......no cables....... Neutral

~˜VëgÅ²˜~ · Posted: Mon Jul 27, 2009 5:24 pm Post subject:

Chiney, it's like that with all 6th gen cefiros (J31 model).......and as cacasplat rightly said A33 and lower should have the usual connecting rods........

btw, cacasplat3, you have a link to download the A33 service manual? I need to get one (not the american versions)......Need one for my pops' car to run through the suspension........oh and all the work I've had done was done by ME Mr. Green

(except the repair of bumper).........my service manual makes life so easy.

Chiney · Posted: Mon Jul 27, 2009 7:53 pm Post subject:

i bet it does!

ok cool

bcuz my a32 using connecting rods as well..so i was just wondering...

if its one thing i know..these cars ride like WOW !!... wifey cud sleep all trip long with ease in this..sometimes i watch her and is like i wanna cap out myself!

changed out the 17s advans to some tsuchiya light weight 16s with 60 series tyres...

feels like air!

cacasplat3 · Posted: Mon Jul 27, 2009 9:44 pm Post subject:

~˜VëgÅ²˜~ here's the link.....took it of pg 29 on this thread......took forever to find it Laughing

http://www.mediafire.com/?en1ogptp40g

~˜VëgÅ²˜~ · Posted: Tue Jul 28, 2009 1:51 am Post subject:

^^^^file no longer hosted there man.........any other links? or if you have one that you could upload for the I.......

A33_VQ35 · Posted: Tue Jul 28, 2009 7:57 pm Post subject:

I still have the file on my hard drive. Only problem is finding time 2 upload it. Will try Asap

~˜VëgÅ²˜~ · Posted: Tue Jul 28, 2009 9:30 pm Post subject:

^^^ok thanks.....JDM version ent? eagerly awaiting..........

jus4coop · Posted: Wed Jul 29, 2009 2:55 pm Post subject: sr18 a/c wiring

i got ah great deal on ah sr18 a/t w extractors. It workin nice but wen i put on de a/c the engine not idling up so the engine shakes alot. I can't get in contact wit the electrician to fix it. if i get the pin layout or wire colour i'll do it myself.

A33_VQ35 · Posted: Wed Jul 29, 2009 3:30 pm Post subject:

^^^ throw yuh frame...

~˜VëgÅ²˜~ · Posted: Wed Jul 29, 2009 8:51 pm Post subject:

^^^LOL.......the manual man, all now so it could be in the process of uploading......

~˜VëgÅ²˜~ · Posted: Wed Aug 05, 2009 12:28 am Post subject:

still waitin man A33_VQ35.