VQ boys......parts, problems, upgrades, swaps, boost

cacasplat3 · Posted: Sun Apr 06, 2008 5:04 pm Post subject:

these are nice too.....will look real sweet on yur ride......but to clean would be a problem, unless u have a pressure washer
Enkei FN18

~˜VëgÅ²˜~ · Posted: Sun Apr 06, 2008 10:40 pm Post subject:

cool dey cacasplat3, but like I say about the universal look.......

will try to throw up a pic tomorrow of the cluster........

A33_VQ35 · Posted: Mon Apr 07, 2008 8:16 am Post subject:

cacasplat3 · Posted: Mon Apr 07, 2008 7:10 pm Post subject:

~˜VëgÅ²˜~, yup.....understand the universal look......i doh really like it myself.....but sumtimes its all u get........the higher end wheels will have what u looking for and BTW enkei has a luxary line......

A33_VQ35, an external gauge that has its own temp sensor like most electrical water temp gauges from autometer, is either u tap the block or u take a t-pipe from the current water temp sensor at the thermostat...........thats what i would have done

~˜VëgÅ²˜~ · Posted: Tue Apr 08, 2008 11:35 pm Post subject:

This is what the cluster looks like........

Click for full-size.

~˜VëgÅ²˜~ · Posted: Tue Apr 08, 2008 11:38 pm Post subject:

when one now starts car the blue light will be lit until the engine temp. reaches normal, then it goes off.......... so no sign if things getting hotter than normal........

cheese pie · Posted: Tue Apr 08, 2008 11:42 pm Post subject:

Yea the wing road iz the same

~˜VëgÅ²˜~ · Posted: Wed Apr 09, 2008 7:40 pm Post subject:

^^yuh get meh PM hoss?

cacasplat3 · Posted: Wed Apr 09, 2008 9:17 pm Post subject:

well dias real shitty...........aye i now notice u have ah 180 speedo Laughing

A33 men rolling with 260 yo! Razz

dat doh mean i using the whole thing eh! Neutral

~˜VëgÅ²˜~ · Posted: Thu Apr 10, 2008 12:17 am Post subject:

^^^yeah it sux........that 180 reaches so quickly and car hasn't even "broken a sweat" yet.......say what, yuh have no right to be clockin dem #'s........lol

A33_VQ35 · Posted: Thu Apr 10, 2008 12:11 pm Post subject:

cacasplat3 · Posted: Fri Apr 11, 2008 8:48 pm Post subject:

well the wheel bearing changed, the throttle body serviced, the front brake pads changed, and that more or less solved most of my majour issues.........still have to sort out the minor ones like the mirror, the antenna......and any other small stuff.......car supposed to be working bess......mom's say so....i havent driven it in almost a month Shocked

~˜VëgÅ²˜~ · Posted: Sun Apr 13, 2008 7:10 pm Post subject:

sorted out my vibration problem........was a matter of rotating tyres, speed balancing, alignment and cambering.........front runs gooood and somehow the ride as well.....

GA16 · Posted: Sat Apr 19, 2008 5:39 am Post subject:

Looking for an ac compressor, if anyone can help would appreciate it.

cacasplat3 · Posted: Sun Apr 20, 2008 10:52 pm Post subject:

bamboo has a lot of front cuts.........take about an hour to find all the places with front cuts.........will ake some doing to get it out if u find it though Laughing

~˜VëgÅ²˜~ · Posted: Fri Apr 25, 2008 8:25 pm Post subject:

so wah going on in we thread dey? wah is de scenes? ttt

still looking for rims.........now I not sure if to go with 18's or go with 17's.....

the 17's will give me a 55 profile and so have more rubber to absorb the road on my end....but it go look kinda lame..........

the 18's gonna give me a 45 profile but I not sure I willing to risk damage.......the rims man tell me that although is a 45 it will still be tall because of the 225/235 width of the tyre.....

~˜VëgÅ²˜~ · Posted: Thu May 01, 2008 10:48 am Post subject:

whey meh nissan bredren dey? no issues...........of course is nissan.......lol........

A33_VQ35 · Posted: Thu May 01, 2008 1:30 pm Post subject:

^^^ Vega so how yuh eh mention dat de VQ23 has electronic throttle and VTC??? Twisted Evil

~˜VëgÅ²˜~ · Posted: Mon May 05, 2008 12:13 am Post subject:

^^^LOL, somehow I not very comfortable with that e-throttle business........and it has vtc in truth??? Shocked

.....

A33_VQ35 · Posted: Mon May 05, 2008 8:16 am Post subject: