| View previous topic :: View next topic |
| Author
|
Message |
cacasplat3 punchin NOS
Joined: 29 Jul 2005 Tech posts: 3272 Location: Where Fuel Is Cheaper Than Bottled Water...... My 2NRide:
|
Posted: Sat Aug 12, 2006 5:17 pm Post subject: |
|
|
well i wah go rwd too, but i cyah see that happening soon though, so i go see bout the fwd for the time. i thinking either sr20det or sr20ve, most likely it'll be det, with some suspension, brakes and mabey sum engine mods.
as for he intake, is cold or short ram? boi i see ah intake selling on e-bay for the car after i bought my K&N cone filter, doh forget, when u doing the intake, put the air temp sensor after the air flow, it minamises the chance of turbalance in the air stream thus preventing the air flow meter from taking wrong readings.  |
|
| Back to top |
|
 |
|
|
 |
Chiney punchin NOS
Joined: 03 Apr 2005 Tech posts: 3068 Location: Maracas,St.Joseph My 2NRide: Nissan Wingroad
|
Posted: Sat Aug 12, 2006 5:21 pm Post subject: |
|
|
| ^^^ dat where our cars differ... |
|
| Back to top |
|
 |
cacasplat3 punchin NOS
Joined: 29 Jul 2005 Tech posts: 3272 Location: Where Fuel Is Cheaper Than Bottled Water...... My 2NRide:
|
Posted: Sat Aug 12, 2006 5:31 pm Post subject: |
|
|
so u doh have ah air tem sensor?
hmmmmmm, well when i put in the K&N i had to find a new place for the sensor, cuz it was placed before the airbox, so i had to cut a hole further down the intake, extend the wire and relocate the sensor. too much work for a simple job.  |
|
| Back to top |
|
 |
Chiney punchin NOS
Joined: 03 Apr 2005 Tech posts: 3068 Location: Maracas,St.Joseph My 2NRide: Nissan Wingroad
|
Posted: Sat Aug 12, 2006 8:03 pm Post subject: |
|
|
dat eh plenty work.. jus doe screw it up..
the intake i gonna do requires me to take out the complete air intake system and replace it with 3" piping... the sensor staying on wat its on..gonna use adapters to join it to the piping ...
as som1 in my other thread said.. cleaner flow of air to the TB....
not cleaner air eh!
denser  |
|
| Back to top |
|
 |
A33_VQ35 Trinituner Peong
Joined: 30 Apr 2004 Tech posts: 428 Location: Nowhere/Everywhere My 2NRide: NISSAN CEFIRO A33
|
Posted: Sat Aug 12, 2006 9:11 pm Post subject: |
|
|
| cacasplat3 wrote: | so u doh have ah air tem sensor?
hmmmmmm, well when i put in the K&N i had to find a new place for the sensor, cuz it was placed before the airbox, so i had to cut a hole further down the intake, extend the wire and relocate the sensor. too much work for a simple job.  |
Didn't u use a drop in filter??
i did and didn't move my air intake temp sensor. I think there is a reason they put it before the filter. |
|
| Back to top |
|
 |
Chiney punchin NOS
Joined: 03 Apr 2005 Tech posts: 3068 Location: Maracas,St.Joseph My 2NRide: Nissan Wingroad
|
Posted: Sat Aug 12, 2006 9:15 pm Post subject: |
|
|
^^ same thing i waz thinkin..
proberly to sense de temp b4 the air reaches the sensor for they cud communicate accordingly... ??
correct me if i wrong |
|
| Back to top |
|
 |
cacasplat3 punchin NOS
Joined: 29 Jul 2005 Tech posts: 3272 Location: Where Fuel Is Cheaper Than Bottled Water...... My 2NRide:
|
Posted: Sat Aug 12, 2006 10:11 pm Post subject: |
|
|
| i use a cone filter, i wish i could post the pic, but i cyah find the data cable fuh meh phone. i doh know bout the placement of the sensor. i doh tink before or after the filter should do harm. |
|
| Back to top |
|
 |
Chiney punchin NOS
Joined: 03 Apr 2005 Tech posts: 3068 Location: Maracas,St.Joseph My 2NRide: Nissan Wingroad
|
Posted: Sun Aug 13, 2006 1:09 am Post subject: |
|
|
| Quote: |
i doh tink before or after the filter should do harm.
|
doe say that nah.. dem ECU real funnie wen dey rdy... |
|
| Back to top |
|
 |
cacasplat3 punchin NOS
Joined: 29 Jul 2005 Tech posts: 3272 Location: Where Fuel Is Cheaper Than Bottled Water...... My 2NRide:
|
Posted: Sun Aug 13, 2006 11:34 am Post subject: |
|
|
| Quote: |
doe say that nah.. dem ECU real funnie wen dey rdy...
|
yea i know how it could be.
before i put in the filter, i went by a mech in sando, didnt know him before though(i was sent there by a guy working for sheriff's) guy had a lot of fast cars by his place(ah couple rx7's ah evo7 and ah r34 gtr v-spec II )
so i got the impression that he knew what he was talking about, when he said to keep it in the intake track. also on top of that i e-mailed K&N with numerous pictures, and info on the car, they also advised me to keep it in the air track, so i did, and soo far no problems.  |
|
| Back to top |
|
 |
Chiney punchin NOS
Joined: 03 Apr 2005 Tech posts: 3068 Location: Maracas,St.Joseph My 2NRide: Nissan Wingroad
|
Posted: Sun Aug 13, 2006 5:06 pm Post subject: |
|
|
^^ duh !...where u wanna put in.. out de window wen u driving??
wat u need to ask.. is WHERE to place it on the intake..
but all seems well.. |
|
| Back to top |
|
 |
cacasplat3 punchin NOS
Joined: 29 Jul 2005 Tech posts: 3272 Location: Where Fuel Is Cheaper Than Bottled Water...... My 2NRide:
|
Posted: Sun Aug 13, 2006 8:12 pm Post subject: |
|
|
| Quote: |
^^ duh !...where u wanna put in.. out de window wen u driving??
|
oh gosh oh gosh
well if i putting in ah cone filter, i cyah put it before, so it had to be after the filter, so what i did, was cut the hole in the intake, just before the trottle body and placed it there.  |
|
| Back to top |
|
 |
Chiney punchin NOS
Joined: 03 Apr 2005 Tech posts: 3068 Location: Maracas,St.Joseph My 2NRide: Nissan Wingroad
|
Posted: Sun Aug 13, 2006 10:37 pm Post subject: |
|
|
lol
my MAF and temp sensor on de same unit..
the MAF b4 de temp sensor though.. |
|
| Back to top |
|
 |
cacasplat3 punchin NOS
Joined: 29 Jul 2005 Tech posts: 3272 Location: Where Fuel Is Cheaper Than Bottled Water...... My 2NRide:
|
Posted: Mon Aug 14, 2006 10:58 pm Post subject: |
|
|
| Quote: |
the MAF b4 de temp sensor though..
|
for a reason too, if the temp was b4 the MAF it would cause turbulance in the air path, causing the MAF to get wrong readings.  |
|
| Back to top |
|
 |
Chiney punchin NOS
Joined: 03 Apr 2005 Tech posts: 3068 Location: Maracas,St.Joseph My 2NRide: Nissan Wingroad
|
Posted: Tue Aug 15, 2006 1:19 am Post subject: |
|
|
really?????????????????????????
 |
|
| Back to top |
|
 |
A33_VQ35 Trinituner Peong
Joined: 30 Apr 2004 Tech posts: 428 Location: Nowhere/Everywhere My 2NRide: NISSAN CEFIRO A33
|
Posted: Tue Aug 15, 2006 8:20 am Post subject: |
|
|
| cacasplat3 wrote: | | Quote: |
the MAF b4 de temp sensor though..
|
for a reason too, if the temp was b4 the MAF it would cause turbulance in the air path, causing the MAF to get wrong readings.  |
Sounds suspicious. Will have to verify that.... |
|
| Back to top |
|
 |
cacasplat3 punchin NOS
Joined: 29 Jul 2005 Tech posts: 3272 Location: Where Fuel Is Cheaper Than Bottled Water...... My 2NRide:
|
Posted: Tue Aug 15, 2006 3:17 pm Post subject: |
|
|
^^^^ well that's what i was told by K&N in an e-mail and also by andy from mini city in valpark(where i got the filter) i didnt want to risk it, so i did as they advised me.
i never really did any research on it, but seeing that the original location of the air temp. sensor was being removed, i had to put it back into the intake somehow, so i put it after the MAF as advised. |
|
| Back to top |
|
 |
Chiney punchin NOS
Joined: 03 Apr 2005 Tech posts: 3068 Location: Maracas,St.Joseph My 2NRide: Nissan Wingroad
|
Posted: Tue Aug 15, 2006 9:10 pm Post subject: |
|
|
^^ i went valpark to do mines today jed
check de odda post tomorrow for pics! |
|
| Back to top |
|
 |
cacasplat3 punchin NOS
Joined: 29 Jul 2005 Tech posts: 3272 Location: Where Fuel Is Cheaper Than Bottled Water...... My 2NRide:
|
Posted: Thu Aug 17, 2006 9:02 pm Post subject: |
|
|
u did it by andy?
i went there today to buy a K&N for a friend, i payed $525 for it, i was like
i payed $365 for a bigger filter at the begining of the year. prices gone up boi. |
|
| Back to top |
|
 |
Chiney punchin NOS
Joined: 03 Apr 2005 Tech posts: 3068 Location: Maracas,St.Joseph My 2NRide: Nissan Wingroad
|
Posted: Thu Aug 17, 2006 9:57 pm Post subject: |
|
|
image something ( i cyar remember)
jameel is meh boi.. he wanted to do it.. so he handle meh
or i wuda do it |
|
| Back to top |
|
 |
Chiney punchin NOS
Joined: 03 Apr 2005 Tech posts: 3068 Location: Maracas,St.Joseph My 2NRide: Nissan Wingroad
|
Posted: Thu Aug 17, 2006 10:03 pm Post subject: |
|
|
| lets talk about it on the odda thread.. this eh makin sense! |
|
| Back to top |
|
 |
cacasplat3 punchin NOS
Joined: 29 Jul 2005 Tech posts: 3272 Location: Where Fuel Is Cheaper Than Bottled Water...... My 2NRide:
|
Posted: Fri Aug 18, 2006 12:19 pm Post subject: |
|
|
well i just went by the mech, fuh ah oil leak, the man say i have to scrap out the entire right side(front) of the engine, this vq is ah stress  |
|
| Back to top |
|
 |
A33_VQ35 Trinituner Peong
Joined: 30 Apr 2004 Tech posts: 428 Location: Nowhere/Everywhere My 2NRide: NISSAN CEFIRO A33
|
Posted: Fri Aug 18, 2006 12:31 pm Post subject: |
|
|
| cacasplat3 wrote: | well i just went by the mech, fuh ah oil leak, the man say i have to scrap out the entire right side(front) of the engine, this vq is ah stress  |
To do work, yes it is!!! u won't like to no what is involved in removing alternator yes! u will bawl. My opinion carry by masterserv if u unsure if yuh mech could handle it. better to get it done right that to have probs later down the road......... |
|
| Back to top |
|
 |
Chiney punchin NOS
Joined: 03 Apr 2005 Tech posts: 3068 Location: Maracas,St.Joseph My 2NRide: Nissan Wingroad
|
Posted: Fri Aug 18, 2006 3:48 pm Post subject: |
|
|
^^ thats fuh sure..
oil leak u say ??
damn!
i had to get de alternator changed as well.. jed !!!! de regualtor for de alt waz 1500 ....
imagine how much i woulda have to pay for de complete new one??
at rodney said.. get it done de proper way.. them engine eh no normal engine! |
|
| Back to top |
|
 |
cacasplat3 punchin NOS
Joined: 29 Jul 2005 Tech posts: 3272 Location: Where Fuel Is Cheaper Than Bottled Water...... My 2NRide:
|
Posted: Fri Aug 18, 2006 6:08 pm Post subject: |
|
|
the mech capable. reason i couldnt get the car done today was cuz he had about 12 cars in the yard, and he just did 2 swaps, and a 3rd was in progress. he is ah boss mech.
i hope i eh have to go through ah alternator removal. that thing in one queer place.
when my old man brought home the far the first time, b4 i popped the hood he said "boi it eh have space fuh ah screwdriver"
the man eh lie yes.
alluh ever try changing fan belts? the one in the back, not the one fuh the AC compressor. the other one? i have no clue where the ajuster is for it, so i ended up leaving its ass right there. changing the other one was ah breeze, but that one is stress.
as fuh the oil leak, it coming from sumwhere behind the oil filter mounting. i thought it was the oil pan at first, so i took it down, cleaned the surface and re-sealed it. leak still persisted, when i gone back under the car i see where it coming from. i think is sum o-ring or sumthing in the oil pump.
monday i'll know |
|
| Back to top |
|
 |
Chiney punchin NOS
Joined: 03 Apr 2005 Tech posts: 3068 Location: Maracas,St.Joseph My 2NRide: Nissan Wingroad
|
Posted: Fri Aug 18, 2006 8:09 pm Post subject: |
|
|
FAWKKKKKKKK!!!!!!!
I GETTIN AH LEAK TOO!!!
i gonna go under de hood tomorrow... i eh need to go by no mach yet...
frigg jed...
jus so.. today self i see de oil in de garage jed! |
|
| Back to top |
|
 |
cacasplat3 punchin NOS
Joined: 29 Jul 2005 Tech posts: 3272 Location: Where Fuel Is Cheaper Than Bottled Water...... My 2NRide:
|
Posted: Fri Aug 18, 2006 9:52 pm Post subject: |
|
|
hmmmm. clean it out with gas first, start it and look at it closely, and see where it coming from, if is the pan u safe, anything else
it eh have space for anything else. |
|
| Back to top |
|
 |
Chiney punchin NOS
Joined: 03 Apr 2005 Tech posts: 3068 Location: Maracas,St.Joseph My 2NRide: Nissan Wingroad
|
Posted: Fri Aug 18, 2006 9:57 pm Post subject: |
|
|
not pan  |
|
| Back to top |
|
 |
cacasplat3 punchin NOS
Joined: 29 Jul 2005 Tech posts: 3272 Location: Where Fuel Is Cheaper Than Bottled Water...... My 2NRide:
|
Posted: Fri Aug 18, 2006 10:17 pm Post subject: |
|
|
trouble, wah area it coming from? front center, back?
if is ah hose is small thing, hope is nuh internal like mine  |
|
| Back to top |
|
 |
Chiney punchin NOS
Joined: 03 Apr 2005 Tech posts: 3068 Location: Maracas,St.Joseph My 2NRide: Nissan Wingroad
|
Posted: Fri Aug 18, 2006 11:09 pm Post subject: |
|
|
| i dont think its interal.. but i will chech it tomorrow..its at the back center.. hard to really make out |
|
| Back to top |
|
 |
cacasplat3 punchin NOS
Joined: 29 Jul 2005 Tech posts: 3272 Location: Where Fuel Is Cheaper Than Bottled Water...... My 2NRide:
|
Posted: Sat Aug 19, 2006 12:07 pm Post subject: |
|
|
| keep us posted. i wah see wah it is may happen in future. |
|
| Back to top |
|
 |
|
|
|