| View previous topic :: View next topic |
| Author
|
Message |
Chiney punchin NOS
Joined: 03 Apr 2005 Tech posts: 3013 Location: Maracas,St.Joseph My 2NRide: Nissan Wingroad
|
Posted: Wed Sep 27, 2006 9:15 pm Post subject: |
|
|
| ^^ ah tune up never hurts |
|
| Back to top |
|
 |
|
|
 |
cacasplat3 punchin NOS
Joined: 29 Jul 2005 Tech posts: 3170 Location: Where Fuel Is Cheaper Than Bottled Water...... My 2NRide:
|
Posted: Thu Sep 28, 2006 8:34 pm Post subject: |
|
|
^^^^ true, but tuning your engine and doing a tune up is 2 different things.
i think
man i saw an A33 this afternoon, lowered, sweet rims, (rear rims were wider) man that car looked sweet lower than stock. seems to be lowered with lowering springs.
buh he was driving too slow so i pass him, i see him like when he hear my engine screaming when i pass him  |
|
| Back to top |
|
 |
Chiney punchin NOS
Joined: 03 Apr 2005 Tech posts: 3013 Location: Maracas,St.Joseph My 2NRide: Nissan Wingroad
|
Posted: Thu Sep 28, 2006 10:52 pm Post subject: |
|
|
^^ your engine or wat is u ?  |
|
| Back to top |
|
 |
cacasplat3 punchin NOS
Joined: 29 Jul 2005 Tech posts: 3170 Location: Where Fuel Is Cheaper Than Bottled Water...... My 2NRide:
|
Posted: Fri Sep 29, 2006 6:28 pm Post subject: |
|
|
kixx. i feel so yes.
ok i've decided to use the air fuel ratio gauge, and an oil pressure gauge, only thing is i dont know if to use the one with the 0~15psi range or the 0~100 psi range
any suggestions? cuz i dont know what the stock oil pressure is supposed to be.
rodney ent u had bought an oil pressure gauge? u installed it? if so wah is the reading? if u eh install yet which one out ah the 2 u buy  |
|
| Back to top |
|
 |
cacasplat3 punchin NOS
Joined: 29 Jul 2005 Tech posts: 3170 Location: Where Fuel Is Cheaper Than Bottled Water...... My 2NRide:
|
Posted: Fri Sep 29, 2006 9:23 pm Post subject: |
|
|
sorry my bad, there arent 15psi oil pressure gauges, i confused it with fuel pressure.
btw these are the gauges i will purchase
 |
|
| Back to top |
|
 |
cacasplat3 punchin NOS
Joined: 29 Jul 2005 Tech posts: 3170 Location: Where Fuel Is Cheaper Than Bottled Water...... My 2NRide:
|
Posted: Fri Sep 29, 2006 11:32 pm Post subject: |
|
|
oh yea i forgot to ask, where or what exactly do you hook up the oil pressure gauge to?  |
|
| Back to top |
|
 |
cacasplat3 punchin NOS
Joined: 29 Jul 2005 Tech posts: 3170 Location: Where Fuel Is Cheaper Than Bottled Water...... My 2NRide:
|
Posted: Sat Sep 30, 2006 2:45 pm Post subject: |
|
|
just pulled down the back brakes cuz of a really really loud squealing in the brakes. i cleaned out the shims, cleaned the calipers, checked the pads for any big pieces of imbedded metal(none found) and then re-mounted, but this time i put a very little bit of grease between the shims and the pads. the loud squealing stopped, but it still have a slight screech, i think that is the cheap-ass pads i'm using, so next pad change i'll know if the pads are really the problem.  |
|
| Back to top |
|
 |
Chiney punchin NOS
Joined: 03 Apr 2005 Tech posts: 3013 Location: Maracas,St.Joseph My 2NRide: Nissan Wingroad
|
Posted: Sat Sep 30, 2006 7:39 pm Post subject: |
|
|
i using titainum.. dunno how great it is..
but works nicely!!
ok.. so my cradle arms dead like vtec..
damn!
the ride is nice until u pass 80.. gotta get dem orginal from massy,, thats ah ton load again! |
|
| Back to top |
|
 |
cacasplat3 punchin NOS
Joined: 29 Jul 2005 Tech posts: 3170 Location: Where Fuel Is Cheaper Than Bottled Water...... My 2NRide:
|
Posted: Sat Sep 30, 2006 9:24 pm Post subject: |
|
|
^^^^^ things real costly by massey jed, i wish i could just get ah crash cefiro sumwhere
i does get ah real bad vibration on meh steering at about 100km. i still doh know wah causing it, i havent speed balanced the wheels yet, but the tires are evenly pressured, and the suspension should be in good condition, cuz i changed a good few parts recently. i would still take it to get the wheels speed balanced and see if that solves the problem.
| Quote: |
so my cradle arms dead like vtec..
|
hahahahaha, jed u does never fail to have me laughing
btw
| Quote: |
oh yea i forgot to ask, where or what exactly do you hook up the oil pressure gauge to?
|
|
|
| Back to top |
|
 |
Chiney punchin NOS
Joined: 03 Apr 2005 Tech posts: 3013 Location: Maracas,St.Joseph My 2NRide: Nissan Wingroad
|
Posted: Sun Oct 01, 2006 12:42 am Post subject: |
|
|
ok.. i dunno how to explain it...
but u kno there ah.. hmm..
ok damn i forget the name of the device and all..
its ah "sumthing" switch.. by yuh oil pans..
ok ok.. PM dave or something nah  |
|
| Back to top |
|
 |
cacasplat3 punchin NOS
Joined: 29 Jul 2005 Tech posts: 3170 Location: Where Fuel Is Cheaper Than Bottled Water...... My 2NRide:
|
Posted: Sun Oct 01, 2006 11:10 am Post subject: |
|
|
well rodney say he buy ah oil pressure gauge, so i'll just wait to see wah he has to say, cuz i feeling lazy to pm sumone now, plus i eh even have the gauge yet
the strut bar should be here in bout 2 weeks max. i wating to see wah kind ah differene it makes, i see plenty tuners posting that it makes a big difference. u should get one boi chiney, and u see u driving ah A32 well parts like rain fuh your car  |
|
| Back to top |
|
 |
Chiney punchin NOS
Joined: 03 Apr 2005 Tech posts: 3013 Location: Maracas,St.Joseph My 2NRide: Nissan Wingroad
|
Posted: Sun Oct 01, 2006 12:53 pm Post subject: |
|
|
lol
i eh need that jus yet
thats de last thing i goin do hoss..
but doe wrry
it all will come...
right now i tryin to build ah integrated pc into de car  |
|
| Back to top |
|
 |
cacasplat3 punchin NOS
Joined: 29 Jul 2005 Tech posts: 3170 Location: Where Fuel Is Cheaper Than Bottled Water...... My 2NRide:
|
Posted: Sun Oct 01, 2006 7:20 pm Post subject: |
|
|
| Quote: |
right now i tryin to build ah integrated pc into de car
|
man i call rice
kixx, buh wah u really planning to do with the pc?
i talk to meh cousin today, he had payed $45 to hook up a vacuum and a volt meter gauge. i was like sooooooo cheap? is right there i going to install my gauges when i get them  |
|
| Back to top |
|
 |
Chiney punchin NOS
Joined: 03 Apr 2005 Tech posts: 3013 Location: Maracas,St.Joseph My 2NRide: Nissan Wingroad
|
Posted: Sun Oct 01, 2006 11:20 pm Post subject: |
|
|
^^ rice??
u mad.. u go able to go online wen u park up in CERTAIN places.. u go have all yuh music on de hard drive straight to de deck or amps..yuh dig ??
add ah lil TV card and install ah ps2... yuh imagination limited orr ???
big KiXx!
tomorrow pops goin see bout de cradle arms..( will be in classes )
puttin "teflon" ( i cyar spell de rass thing) bushings.. good stuff.. and den de strut bar after.. |
|
| Back to top |
|
 |
A33_VQ35 Trinituner Peong
Joined: 30 Apr 2004 Tech posts: 428 Location: Nowhere/Everywhere My 2NRide: NISSAN CEFIRO A33
|
Posted: Mon Oct 02, 2006 9:43 am Post subject: |
|
|
Fellas big things ah gwan......
So i gettin a deal on a VQ35DE engine with a 6-sp box with a top speed of 140MPH but is from a 2004 maxima(USDM) an is drive by wire throttle. Not sure if it would work as it comin from a LHD car.
Drive by wire is where there is no cable connecting the accelerator with the TB. It uses sensors to detect how far the accelerator has been pressed and responds accordingly. The only problem is that the TB never opens 100% at WOT, only 80%. but with 265HP who cares........
I have posts on 3 different forums on whether it will work. Will let u guys no the outcome.
On a side note one of the guys on maxima.org told me he read through the entire discussion as it came up on a google search he did. He told me he was impressed.
chiney a guy wanted to no if your car came with 2-piston calipers????
Anyone knows any importers who can give me a good deal in importing an engine??? may weigh about 330LBS. |
|
| Back to top |
|
 |
Chiney punchin NOS
Joined: 03 Apr 2005 Tech posts: 3013 Location: Maracas,St.Joseph My 2NRide: Nissan Wingroad
|
Posted: Mon Oct 02, 2006 5:26 pm Post subject: |
|
|
firetruck!
well yeh.. this thread can lock now..
lol.. take win wid that motor.. if u get it !!
and yes.. 2 piston calipers..
stops like WOW!!
remember the car is ah bit heavy.. so it wont brake like ah wingroad or b14.. but it stops GOOD!!
gettin more info on de struts.
and i not goin teflon n e more.. car is to heavy for it.. so i need orginal.. gonna get me ah pair soon.. and well might go high performance bearings as well.. little go ppl kno how much that improves the performance
tell us more bout this 35de of yours.. and well i goin check dat site tonight self! |
|
| Back to top |
|
 |
cacasplat3 punchin NOS
Joined: 29 Jul 2005 Tech posts: 3170 Location: Where Fuel Is Cheaper Than Bottled Water...... My 2NRide:
|
Posted: Mon Oct 02, 2006 8:49 pm Post subject: |
|
|
| Quote: |
firetruck!
well yeh.. this thread can lock now..
lol.. take win wid that motor.. if u get it !!
|
ent, the man just own me with that statememnet, now ah need ah T4 with ah 100 shot ah N2O, plus i have to strip meh entire interior, just so rodney could beat meh by 2 car lengths.
well look thing man car have 2 pot calipers yes! and the new model have sum sheit, cuz today yuh boi heading west after west mall, just where the highway ends and goes into a 2 way road, ah man just swing out from the opposite lane to go into ah street, boi i mash that brakes soo, hard i feel like the pedal shaft bend, tires start to grab, cuz the road rough, so i hearing like 'screh, screech, screch' buh i had enough time to stop i think i go have to check meh ABS sensors and clean them if necessary
rodney just spoke to meh dad, he has a cuz who brings in car, parts and engines from japan, but u said its a usdm, so i'll find out a little more for u and i'll drop u a pm or sumthing.
chiney like u get put out boi, cuz the way u going, like u wah live in yuh car, ps2 and tv and thing, next thing u go wah put ah toilet and ah kitchen
so we get recognition on google yes, (is this dicussion u was talking bout rite? )
well nothing new on my car except, i have to clean the K&N soon, and i still eh know where the bumperclat i have to hook up the oil press. gauge too
lataz, i go post sumthing tomorrow  |
|
| Back to top |
|
 |
A33_VQ35 Trinituner Peong
Joined: 30 Apr 2004 Tech posts: 428 Location: Nowhere/Everywhere My 2NRide: NISSAN CEFIRO A33
|
Posted: Tue Oct 03, 2006 2:55 pm Post subject: |
|
|
This is wha the engine looks like!!!!!!! Sweeeeeet
Well prob not so clean though.... will let u guys no....
 | | Click for full-size. | |
|
| Back to top |
|
 |
Chiney punchin NOS
Joined: 03 Apr 2005 Tech posts: 3013 Location: Maracas,St.Joseph My 2NRide: Nissan Wingroad
|
Posted: Tue Oct 03, 2006 6:33 pm Post subject: |
|
|
skeeeeeeeeeeeeeeeeeeeeeeeettttttttttttttttttttttttttttttt
srry dey eh
i wasnt even doin ah intake on that.. jus ah K&N drop in.. cuz dat wuda be de same as using pipin cuz that alrdy has ah cold air as u can see it will be pullin air from de front as u drive.. de fastah de cooler..
nicenesssss !!!!!!
chipped ECU and thats all u want with ah 100shot nos..
nice  |
|
| Back to top |
|
 |
A33_VQ35 Trinituner Peong
Joined: 30 Apr 2004 Tech posts: 428 Location: Nowhere/Everywhere My 2NRide: NISSAN CEFIRO A33
|
Posted: Tue Oct 03, 2006 9:19 pm Post subject: |
|
|
| Chiney wrote: | skeeeeeeeeeeeeeeeeeeeeeeeettttttttttttttttttttttttttttttt
srry dey eh
i wasnt even doin ah intake on that.. jus ah K&N drop in.. cuz dat wuda be de same as using pipin cuz that alrdy has ah cold air as u can see it will be pullin air from de front as u drive.. de fastah de cooler..
nicenesssss !!!!!!
chipped ECU and thats all u want with ah 100shot nos..
nice  |
That's where all A33 airbox are. pullin air from directly in front. that's y now i jus have a drop in. actually its the exact same intake in de car now.
For the ECU i already have a greddy e-manage to tune the hell out of it. It's jus to get it..............  |
|
| Back to top |
|
 |
|
|
|