Tryin a ting wit the BJ - Exhaust Done

red bwoy · Posted: Sun May 18, 2008 8:06 pm Post subject:

eef is a zl-ve engine yuh get an didnt get de zl-ve brain trust mih it will work worse dan ah stock zl-de my vvt sensor went bad after changin timin belt an dat was de worst drive i eva had from diego tuh de bamboo it works like sheit an tell yuh electrician he can't repeat cannot get de vvt tuh work without de vvt ecu unless yuh buy ah vtec controller

Strugglerzinc · Posted: Tue Jun 17, 2008 11:37 am Post subject:

This is what the combined idiots did to my car...

Click for full-size.

You can see the headlight it take days to paint.

You can see the $200 number plate i put on the week before.

Gon in to paint today...total cost... $8000+

ghostbusters · Posted: Tue Jun 17, 2008 12:41 pm Post subject:

strugglerz, d price ent so bad man, my pops fielder get hit a month ago, cost 25k to repair, juss now u go be back in d moddin business

Strugglerzinc · Posted: Tue Jun 17, 2008 7:02 pm Post subject:

^^das why i didn buy a toyota. even the air fuh the tires expensive. Neutral

ζђίΰД™ · Posted: Tue Jun 17, 2008 7:12 pm Post subject:

villain · Posted: Thu Jun 19, 2008 9:14 pm Post subject:

how come the cam sensor gave you trouble?

ζђίΰД™ · Posted: Thu Jun 19, 2008 9:57 pm Post subject:

^ I don't know what caused it to give trouble, but the problem it caused was when the engine gets hot and in high RPM it would give a buck sometimes cut off. If left to cool for just a minute it would work normal, only if the car is driven hard again it would buck or cut off. ... It was nothing serious but a problem none the less.

red bwoy · Posted: Thu Jun 19, 2008 10:03 pm Post subject:

i had de same problems but in my case it wasn't de cam sensor it was de temperature unit an de thermostat was florkin up put in de original thermo and sensor problem solved i also changed cam an crank sensors but de ones i took out still good yuh neva know wha culd go orn an ah get some new pistoplange bushin too Mr. Green

ghostbusters · Posted: Thu Jun 19, 2008 10:06 pm Post subject:

bet u still runnin the nasty old diff bulb and skyhook though

red bwoy · Posted: Thu Jun 19, 2008 10:11 pm Post subject:

yuh done know if it ain't broke don't fix it

ghostbusters · Posted: Thu Jun 19, 2008 10:57 pm Post subject:

u get the number for car boutique for me or wha red bwoy, i wanna get a k&n drop in or a CAI

ζђίΰД™ · Posted: Fri Jun 20, 2008 6:07 am Post subject:

^ If u does be down south u could check Sheriff, he has K&N.
I Changed my K&N a week now for a Ractive Tornado Filter.. Got it in Laughlin and de Gannes car section.. the one rite by Gulf City.. Paid $158. Sounds just like the K&N and performs the same in my opinion..

Here's what it looks like...

ghostbusters · Posted: Fri Jun 20, 2008 8:13 am Post subject:

where'd u get the intake?, i know das a zl-ve but will it work on a zm-de? no hesitation, intake looks good

ζђίΰД™ · Posted: Fri Jun 20, 2008 9:06 am Post subject:

When i had the ZM engine I got the intake made by Imraj in south. I told him how I wanted it and he built it. It cost about $150 at the time, but I sent a friend there for Imraj to fabricate one for his 323 and it was like $300 he wanted to build it.. which isn't that much.

Oh yea.. u run the risk of forking up ya intake sensor cuz I know a few ppl with 323's that did it after seeing mine and they had to get new air flow sensors.. over $2000 for a brand new one in southern sales..

ghostbusters · Posted: Fri Jun 20, 2008 9:19 am Post subject:

i surprisingly enough have a spare maf sensor, that intake above there is home made or store bought?

ζђίΰД™ · Posted: Fri Jun 20, 2008 10:07 am Post subject:

Home Made

If u have a spare sensor then u orn like boil korn

ghostbusters · Posted: Fri Jun 20, 2008 11:48 am Post subject:

who mek that, thas the same one imraj make? good workmanship day

ζђίΰД™ · Posted: Fri Jun 20, 2008 12:18 pm Post subject:

The one Imraj made looked very similar to it, just the way he mounted the sensor was a bit different.

A friend and I did over this one I useing now.. the only difference iz the sensor mount fabricated better.

villain · Posted: Fri Jun 20, 2008 3:45 pm Post subject:

partner imraj doh bend pipe good...spend your money and go by specialist...
i used to say the same thing a few months ago about specialist price and used to go by imraj...but you does feel the difference with specialist...big difference trust me...right now i have the zl-ve headers running but when i make up my mind in the direction i want to go, i'll let specialist make headers for me too...
2nd.... take back your k&n... we dyno the k&N and it made 2hp difference....reactive you lose hp...dyno tested...(the k&N on my car and the reactive on a nissan)

red bwoy · Posted: Fri Jun 20, 2008 4:24 pm Post subject:

x2 k&n ftw

ghostbusters · Posted: Fri Jun 20, 2008 8:55 pm Post subject:

ey, where is specialist and if anybody know where i'll get a bj 323 for cheap lemme know, i want one to do some serious suspension mods and possibly a gearbox, want to build for d corners, gettin a great deal on suspension parts, anybody interested in 4 mazdaspeed springs for their BJ, i getting , the 4 springs and the swaybar set and the upper strut tower bar for 2k;;;lemme know asap i fanyone interested, lemme know tonite self eh ppl

Strugglerzinc · Posted: Fri Jun 20, 2008 9:09 pm Post subject:

just wave it in front mih nah ^^^ Laughing

would like to know where specialist is as well for future reference...

nareshseep · Posted: Fri Jun 20, 2008 9:16 pm Post subject:

ghostbusters · Posted: Fri Jun 20, 2008 9:16 pm Post subject:

so strugglerz, you might be interested? ifeel i will buy it an look to sell back the springs yes,

nareshseep · Posted: Fri Jun 20, 2008 9:23 pm Post subject:

I interested in upper strut bar

ghostbusters · Posted: Fri Jun 20, 2008 9:29 pm Post subject:

i kinda wanted the stiffer sway bars and the strut tower bar..springs up for grabs, if ididnt put d flare kit i woulda keep it, i thinkin of tearin out the flare, das why i lookin for another BJ, so i could go allout, getting sweet suspension parts, that car go be untouchable in the corners when i done with it

ghostbusters · Posted: Fri Jun 20, 2008 11:35 pm Post subject:

dem effers out of stock, will let allyuh know, they say they getting stock nextweek, will update then

ghostbusters · Posted: Fri Jun 20, 2008 11:43 pm Post subject:

oil gasket??, exhaust black, probly runnin rich check air filter then injectors, dunno wa a oil gasket is though...busy tomorrow, have to work

Strugglerzinc · Posted: Sat Jun 21, 2008 4:18 pm Post subject:

ghostbusters · Posted: Sat Jun 21, 2008 4:37 pm Post subject:

no, i remember, but i sure it have mazda men out there willing to buy... i looking for anopther BJ, preferably write off so i could bring down a shell, i want to do some serious mods on either the zl-ve or zm-de.. if anybody come across anything, let me know please