***The official early evo/GSR thread***

janfar · Posted: Sun Sep 27, 2009 10:08 pm Post subject:

Home, home on the beach,
where the carite and de cobo does play.

MISHI · Posted: Sun Sep 27, 2009 10:59 pm Post subject:

baseball...

Death-Row · Posted: Mon Sep 28, 2009 12:06 am Post subject:

well i drunk right now. but meh car wukkin good lmao. dont worry fellaz, as a wize tuner told me tonight, dont drink and drive so i parked up and walk home lol.

janfar · Posted: Mon Sep 28, 2009 6:55 am Post subject:

Anybody up for some drifting on the beach in Mayaro??? Its lots of fun and I can get you to a car wash for underwashing after...

Low tide, the beach is about 100ft (shoreline). Absoluteley beautiful to feel your car try to loose grip in the sand.

Death-Row · Posted: Mon Sep 28, 2009 7:13 am Post subject:

janfar,im up for that Very Happy

lemme know in advance tho, will see what shift im working at the time Laughing

janfar · Posted: Mon Sep 28, 2009 7:20 am Post subject:

Will have to check the tides. But prepare for me to give you a weekday when no ones on the beach. Cause you can get up to speeds of 200km easy when you see the room. Imagine 10-15km of empty straight just for you to make you car go all over. And no police to charge you.

Nik · Posted: Mon Sep 28, 2009 9:42 am Post subject:

janfar, so u start the drift thing now lol

AYE_SOLDIER · Posted: Mon Sep 28, 2009 10:35 am Post subject:

remember when y'all actually do this "you tube" is your friend. Smile

Nik · Posted: Mon Sep 28, 2009 3:31 pm Post subject:

Nik · Posted: Mon Sep 28, 2009 3:32 pm Post subject:

excuse the quality... phone video lol

Death-Row · Posted: Mon Sep 28, 2009 6:40 pm Post subject:

niceeeee vid.

janfar, yea man, we could organize, shoot a lil vid also.

janfar · Posted: Tue Sep 29, 2009 10:16 am Post subject:

Will do.

Well i just reach home last night and already im up under the bonnet.

(keep in mind i live Mayaro)

I noticed since last time i was home that there was an oil leak on the turbo line from the head. So, today in an attempt to fix said leak i wrang the head of the banjo bolt. Feck sake. Now i need one, and I cant find it anywhere in Mayaro.

Bweh... Crying or Very sad

janfar · Posted: Tue Sep 29, 2009 1:41 pm Post subject:

W2J dont have, so im going to get one made, i already took mine off and gonna get a new onw made from braided hose. According to the price I will get a few made in case you guys need one.

janfar · Posted: Wed Sep 30, 2009 10:21 pm Post subject:

Ok, so everyone can make the hose but no one has the banjo bolt. Sheriffs on Cipero st has but all in english (thread).

[RANT]Now, 90% of the cars driven in Trinidad are japanese. Why on earth would all these big name places only stock NPT/UNF etc threaded nuts and bolts etc. What about the M8 M10's etc. Not a place could offer a solution. And i went to all.

Im gonna make my own bolt tomorrow. [/RANT]

TrEnD$eTt@ · Posted: Thu Oct 01, 2009 7:38 pm Post subject:

assistance please guys..went to do alignment today and was told rightside (knuckle joint) Rolling Eyes

bad i was wondering where i can get this to buy and if the one from the CB lancer is the same ? assistance appreciated!

janfar · Posted: Thu Oct 01, 2009 10:49 pm Post subject:

I used one from the CK lancer and it works well. Take the old one with u when parts hunting. Make sure the inner thread is the same with the rack end.

TrEnD$eTt@ · Posted: Fri Oct 02, 2009 10:53 am Post subject:

thanxjanfar, will try the ck lancer type !

janfar · Posted: Sat Oct 03, 2009 9:24 pm Post subject:

Death-Row, Where u get the master cylinder kit from. Did they have slave cylinder kits as well.

I lost my clutch today on the hiway macoya. Had to limp all the way home while timing my gears. Checked it out and im loosing oil from my slave.

*KRONIK* · Posted: Sat Oct 03, 2009 9:50 pm Post subject:

Death-Row · Posted: Sun Oct 04, 2009 1:31 pm Post subject:

i got my master kit from cyber evo and the slave was done by coutesy autoparts on boundry rd san juan. i dunno if one of them gone again tho cause i check my fluid and it was black today, hopeing its because of some of the old fluid? maybe it wasnt bled good last time? will change the fluid and bleed again to see yes.

*KRONIK* · Posted: Sun Oct 04, 2009 4:03 pm Post subject:

janfar · Posted: Sun Oct 04, 2009 4:49 pm Post subject:

Soooo, I took down my slave cylinder at 6am on the road in Valsayn in front my Gfs house, scrapped it down and found the seal torn. Had to drop her to work and use her car. I went by Faiz (closest place after dropping her off) and got the seal there with no prob. I bought 5 extra (they were $6 each). Got it back to the car, cleaned up the cylinder, bleed back the clutch system and car was back to normal. Now im gonna look for the kit for the Master cylinder.

Any suggestions?

janfar · Posted: Tue Oct 06, 2009 10:41 pm Post subject:

Soooo, I hate my evo now. Anyone want it to buy??? My head gasket blew on me now. Fackin hell. How much for a front cut in the bamboo these days?

Nik · Posted: Wed Oct 07, 2009 3:16 am Post subject:

a front cut (complete) at cheapest is 20k if u lucky... price range 20k-30k depending on where u go... i was told that D & D has a front cut presently, more than likely their price will be around the cheapest from what i've seen around

Death-Row · Posted: Wed Oct 07, 2009 8:35 am Post subject:

WTF, so muchhhh? bess yuh buy a full evo3 Laughing

men go kill we with prices boy fellas.

well im now going by my mechanic to try and sort out my oil leak.

sorry to hear boy janfar but yun know how it is with ole cars, keep fixing, soon yuh will have changed everything in it, so yuh could call it a new car after Laughing

keep us updated

janfar · Posted: Wed Oct 07, 2009 10:38 pm Post subject:

Lol, is pressure after pressure. It looks like im going to take the easy/ expensive way out of this and get a front cut. Will let u all know how it all goes.

Nik · Posted: Wed Oct 07, 2009 11:09 pm Post subject:

front cut not that bad as you can then sell off the unnecessary parts... bonnet, fenders, bumper, intercooler, etc & make back some of d money

janfar · Posted: Thu Oct 08, 2009 9:13 am Post subject:

Yeh, was thinking about that and with all my engine woes it may be the best bet.

janfar · Posted: Thu Oct 08, 2009 12:01 pm Post subject:

So, now try starting she up and she did not have anything to offer. So, engine swap and I am going to take my time (2-3yrs) and rebuild the original engine up to push maybe 600hp. Well will try.

Conrad · Posted: Thu Oct 08, 2009 12:51 pm Post subject:

Goodluck.