ProjEct 80

Zeriam · Posted: Fri May 30, 2008 8:43 pm Post subject:

an the man say it not fass Enuff

Zeriam · Posted: Sat Jun 07, 2008 5:20 pm Post subject:

i going to blame thE rotors causE i know thEY need to change but afteR 160kph stopping fast Enuff is pressurE Twisted Evil

33 hertz · Posted: Sat Jun 07, 2008 6:43 pm Post subject:

I know the feeling. My rotors in a mess too, but i put on some wagner pads and they holding much better even with the old rotors.

Zeriam · Posted: Sat Jun 07, 2008 6:50 pm Post subject:

recENtly thE axeL nut beEN getting losE an making the rotor wobblE so looking at it, its rEal shinEEy.

Zeriam · Posted: Thu Jun 12, 2008 2:34 pm Post subject:

sad nEWs ah was out running abit hard and i spin a bearing oil was too low...i feELing likE a 2 day old bakE it can bE fixeD

dmitc · Posted: Thu Jun 12, 2008 4:02 pm Post subject:

how is this posible?
newly installed engine
should mean new seal new belts new fluids and you should be monitoring for leaks
even if the mechanic was slack you should have been checking your level every couple of days Evil or Very Mad

Zeriam · Posted: Thu Jun 12, 2008 9:07 pm Post subject:

not that much work

33 hertz · Posted: Thu Jun 12, 2008 11:15 pm Post subject:

Doh study it man it could happen to the best of us, plus the 20v is notorious for that problem. Changed connecting rod bearings in the other car last week, took about 2 days, the original bearings cost about $350 and around $500 in labour. I suggest you take a look at the main bearing so you can change it one time if necessary as you in there already.

Zeriam · Posted: Fri Jun 13, 2008 4:52 pm Post subject:

yeah an wELl i had a slight double helix that 5a box an 14's. i was irrisponsable it going in tuEsday i hopE to be back out b4 the 22nd or thE lime causE it go look bad organise a limE in and showing up in a nissan Mr. Green

reddo_tuner · Posted: Fri Jun 20, 2008 7:18 pm Post subject:

Zeriam, i feel u should not drive until the lime, no driving. Neutral

Zeriam · Posted: Wed Jun 25, 2008 6:14 pm Post subject:

nEED a heAd an block who could link mEH

dmitc · Posted: Wed Jun 25, 2008 6:52 pm Post subject:

oh sheit that is pressure
thought it was only a bearing need replacing?

Terran · Posted: Wed Jun 25, 2008 11:57 pm Post subject:

What happened?

reddo_tuner · Posted: Thu Jun 26, 2008 8:59 am Post subject:

i told him not to drive. Evil or Very Mad

Terran · Posted: Thu Jun 26, 2008 10:22 am Post subject:

Zeriam, contact CorollaGT from the forum. 489-0010. He might be able to help you.

Zeriam · Posted: Thu Jun 26, 2008 6:18 pm Post subject:

alreAdy had him on my msn Mr. Green

depEnds on pricEs of other contacts i'll pick but i'm hEavily lEaning to what he is sElling

updatE crank shaft bullEd, all bEaring mash up, connEcting rods burnt.......

33 hertz · Posted: Thu Jun 26, 2008 7:42 pm Post subject:

^

how u manage that one hoss

Zeriam · Posted: Thu Jun 26, 2008 11:21 pm Post subject:

low oil, practicing with my crappy suspension on lil downhill action...live an learn

Metallicork · Posted: Fri Jun 27, 2008 8:36 am Post subject:

check your post on Classifieds....

droppa · Posted: Fri Jun 27, 2008 12:25 pm Post subject:

bwdf i seeing here boi, hoss u is ad destructocon Twisted Evil