Quasiturbine engine.

[Polydor]

Quasiturbine Basics
The Saint-Hilaire family first patented the quasiturbine combustion engine in 1996. The quasiturbine concept resulted from research that began with an intense evaluation of all engine concepts to note advantages, disadvantages and opportunities for improvement. During this exploratory process, the Saint-Hilaire team came to realize that a unique engine solution would be one that made improvements to the standard Wankel, or rotary, engine.
Like rotary engines, the quasiturbine engine is based on a rotor-and-housing design. But instead of three blades, the quasiturbine rotor has four elements chained together, with combustion chambers located between each element and the walls of the housing.


The four-sided rotor is what sets the quasiturbine apart from the Wankel. There are actually two different ways to configure this design -- one with carriages and one without carriages. As we'll see, a carriage, in this case, is just a simple machine piece.

First, let's look at the components of simpler quasiturbine model -- the version without carriages.

The Simple Quasiturbine Engine
The simpler quasiturbine model looks very much like a traditional rotary engine: A rotor turns inside a nearly oval-shaped housing. Notice, however, that the quasiturbine rotor has four elements instead of three. The sides of the rotor seal against the sides of the housing, and the corners of the rotor seal against the inner periphery, dividing it into four chambers.

In a piston engine, one complete four-stroke cycle produces two complete revolutions of the crankshaft .That means the power output of a piston engine is half a power stroke per one piston revolution.

A quasiturbine engine, on the other hand, doesn't need pistons. Instead, the four strokes of a typical piston engine are arranged sequentially around the oval housing. There's no need for the crankshaft to perform the rotary conversion.

This animated graphic identifies each cycle. Notice that in this illustration the spark plug is located in one of the housing ports.



In this basic model, it's very easy to see the four cycles of internal combustion:

Intake, which draws in a mixture of fuel and air
Compression, which squeezes the fuel-air mixture into a smaller volume
Combustion, which uses a spark from a spark plug to ignite the fuel
Exhaust, which expels waste gases (the byproducts of combustion) from the engine compartment
Quasiturbine engines with carriages work on the same basic idea as this simple design, with added design modifications that allow for photo-detonation. Photo detonation is a superior combustion mode that requires more compression and greater sturdiness than piston or rotary engines can provide. In the next section, we'll see what this combustion mode is all about.

Photo-detonation
Internal combustion engines fall into four categories based on how well air and fuel are mixed together in the combustion chamber and how the fuel is ignited. Type I includes engines in which the air and fuel mix thoroughly to form what is called a homogenous mixture. When a spark ignites the fuel, a hot flame sweeps through the mixture, burning the fuel as it goes. This, of course, is the gasoline engine.


Four Types of Internal Combustion Engines
Homogenous Fuel-air Mixture Heterogeneous Fuel-air Mixture
Spark-ignition Type I
Gasoline Engine Type II
Gasoline Direct-injection (GDI) Engine
Pressure-heated Self-ignition Type IV
Photo-detonation Engine Type III
Diesel Engine


Type II -- a gasoline-direct injection engine -- uses partially mixed fuel and air (i.e., a heterogeneous mixture) that is injected directly into the cylinder rather than into an intake port. A spark plug then ignites the mixture, burning more of the fuel and creating less waste.

In Type III, air and fuel are only partially mixed in the combustion chamber. This heterogeneous mixture is then compressed, which causes the temperature to rise until self-ignition takes place. A diesel engine operates in this fashion.

Finally, in Type IV, the best attributes of gasoline and diesel engines are combined. A premixed fuel-air charge undergoes tremendous compression until the fuel self-ignites. This is what happens in a photo-detonation engine, and because it employs a homogenous charge and compression ignition, it is often described as an HCCI engine. HCCI (Homogeneous Charge Compression Ignition) combustion results in virtually no emissions and superior fuel efficiency. This is because photo-detonation engines completely combust the fuel, leaving behind no hydrocarbons to be treated by a catalytic converter or simply expelled into the air.





Of course, the high pressure required for photo-detonation puts a significant amount of stress on the engine itself. Piston engines can't withstand the violent force of the detonation. And traditional rotary engines such as the Wankel, which have longer combustion chambers that limit the amount of compression they can achieve, are incapable of producing the high-pressure environment necessary for photo-detonation to occur.

Enter the quasiturbine with carriages. Only this design is strong enough and compact enough to withstand the force of photo-detonation and allow for the higher compression ratio necessary for pressure-heated self-ignition.

Components of Quasiturbine with Carriages
Even with its added complexity, the quasiturbine engine with carriages boasts a relatively simple design. Each part is described below.
The housing (stator), which is a near oval known as the "Saint-Hilaire skating rink," forms the cavity in which the rotor rotates. The housing contains four ports:


A port where the spark plug normally sits (the spark plug can also be placed in the housing cover -- see below).
A port that is closed with a removable plug.
A port for the intake of air.
An exhaust port used to release the waste gases of combustion.

The housing is enclosed on each side by two covers. The covers have three ports of their own, allowing for maximum flexibility in how the engine is configured. For example, one port can serve as an intake from a conventional carburetor or be fitted with a gas or diesel injector, while another can serve as an alternate location for a spark plug. One of the three ports is a large outlet for exhaust gasses.


How the various ports are used depends on whether the automotive engineer wants a traditional internal combustion engine or one that delivers the super-high compression required of photo-detonation.

The rotor, made of four blades, replaces the pistons of a typical internal combustion engine. Each blade has a filler tip and traction slots to receive the coupling arms. A pivot forms the end of each blade. The job of the pivot is to join one blade to the next and to form a connection between the blade and the rocking carriages. There are four rocking carriages total, one for each blade. Each carriage is free to rotate around the same pivot so that it remains in contact with the inner wall of the housing at all times.


Each carriage works closely with two wheels, which means there are eight wheels altogether. The wheels enable the rotor to roll smoothly on the contoured surface of the housing wall and are made wide to reduce pressure at the point of contact.

The quasiturbine engine doesn't need a central shaft to operate; but of course, a car requires an output shaft to transfer power from the engine to the wheels. The output shaft is connected to the rotor by two coupling arms, which fit into traction slots, and four arm braces.


When you put all of the parts together, the engine looks like this:

Notice that the quasiturbine engine has none of the intricate parts of a typical piston engine. It has no crankshaft, valves, pistons, push rods, rockers or cams. And because the rotor blades "ride" on the carriages and wheels, there is little friction, which means oil and an oil pan are unnecessary.

Operation of Quasiturbine with Carriages
Now that we've looked at the major components of the quasiturbine with carriages, let's see how everything comes together. This animation illustrates the combustion cycle:

The first thing you'll notice is how the rotor blades, as they turn, change the volume of the chambers. First the volume increases, which allows the fuel-air mixture to expand. Then the volume decreases, which compresses the mixture into a smaller space.

The second thing you'll notice is how one combustion stroke is ending right when the next combustion stroke is ready to fire. By making a small channel along the internal housing wall next to the spark plug, a small amount of hot gas is allowed to flow back to the next ready-to-fire combustion chamber when each of the carriage seals passes over the channel. The result is continuous combustion, just like in the airplane gas turbine!

What all this amounts to in the quasiturbine engine is increased efficiency and performance. The four chambers produce two consecutive circuits. The first circuit is used to compress and expand during combustion. The second is used to expel exhaust and intake air. In one revolution of the rotor, four power strokes are created. That's eight times more than a typical piston engine! Even a Wankel engine, which produces three power strokes per rotor revolution, can't match the performance of a quasiturbine.

Advantages and Disadvantages
Obviously, the increased power output of the quasiturbine engine makes it superior to Wankel and piston engines, but it has also solved many of the problems presented by the Wankel. For example, the Wankel engines leads to incomplete combustion of the fuel-air mixture, with the remaining unburned hydrocarbons released into the exhaust. The quasiturbine engine overcomes this problem with a combustion chamber that is 30 percent less elongated. This means that the fuel-air mixture in the quasiturbine experiences a greater compression and a more complete burn. It also means that, with less fuel going unburned, the quasiturbine increases fuel efficiency dramatically.
Other significant advantages of the quasiturbine include:

Zero vibration because the engine is perfectly balanced
Faster acceleration without a flywheel
Higher torque at lower rpm
Nearly oil-free operation
Less noise
Complete flexibility to operate completely submerged or in any orientation, even upside-down
Fewer moving parts for less wear and tear
Finally, the quasiturbine can run on different kinds of fuel, including methanol, gasoline, kerosene, natural gas and diesel. It can even accommodate hydrogen as a fuel source, making it an ideal transitional solution as cars evolve from traditional combustion to alternate fuels.
As we'll see in the next section, the biggest problem with the quasiturbine engine is its lack of testing in real-world environments.

Real-World Applications


Considering the modern internal combustion engine was invented by Karl Benz in 1886 and has enjoyed almost 120 years of design refinements, the quasiturbine engine is still in its infancy. The engine is not used in any real-world applications that would test its suitability as a replacement for the piston engine (or the rotary engine, for that matter). It is still in its prototype phase -- the best look anyone has gotten so far is when it was demonstrated on a go-kart in 2004. The quasiturbine may not be a competitive engine technology for decades.
In the future, however, you will likely see the quasiturbine used in more than just your car. Because the central engine area is voluminous and requires no central shaft, it can accommodate generators, propellers and other output devices, making it an ideal engine to power chain saws, powered parachutes, snowmobiles, air compressors, ship propulsion systems and electric power plants.



How Quasiturbine Engines Work

by William Harris.


http://auto.howstuffworks.com/quasiturbine.htm


Great design.
Mods this should be a sticky
Polydor.

[InDeForest]

mmm lovely, four combustion 'strokes' per engine turn, where else you getting that, a V16.

[bleedingfreak]

That was a great read... thanks alot

But will we ever see such technology coming to the forefront with the potential depletion of hydrocarbons and emphasis being placed on electrical systems?

[NickJr.]

Didn't really read it, but it looks like a type of rotary engine. Will read it later in it's entirety

[X2]

[MISHI]

damn it's a really good idea..but the only thig I don't like and I'd question is the strength of the pivot area for the carriges....and if they'd hold up with time

[zodiaque]

[demented]

Rotary Inspired.......check the signatuure

[bleedingfreak]

I am a lil concerned about the wheels... What's that about? How do you make wheels to run in an engine? But hen again, there were a few real world applications (according to the article) with the go-kart especially...

So I dunno...