QG owners united

juicy_j · Posted: Sun Jun 24, 2007 2:02 pm Post subject:

QG for life

Trini_tech · Posted: Sun Jun 24, 2007 7:37 pm Post subject:

Have A QG15 in my nissan AD

Quiksilver · Posted: Mon Jun 25, 2007 11:46 am Post subject:

azis · Posted: Mon Jun 25, 2007 7:04 pm Post subject:

well even if you cant get it outside just walk with ur chasis # and go neal and massy or motorist

achillies · Street 2NR Joined: 23 Feb 2005 Tech posts: 80 My 2NRide:

qg15 in a b15

good gas mileage and i run ac all the time

no problems at all

Nissan QG15DE · Posted: Mon Jul 02, 2007 12:21 pm Post subject:

Well Quicksilver, you will get parts for the 4WD AD but you'll have to alot of asking around. Or if you know south good, go to DIAZ ENTERPRIZE in Duncan Village; opposite the LEN HAP Grocery and i'm sure you'll get yuh parts Very Happy

...if not simply go to Neal and Massy like Azis said.

Nissan QG15DE · Posted: Mon Jul 02, 2007 12:24 pm Post subject:

I read that a QG18 comes with 4 O2 Sensors, do you all know if the other sizes of QG comes with 4 or just one?

crossdrilled · Posted: Mon Jul 02, 2007 12:33 pm Post subject:

Here is a another idea, get your injectors and throttle body cleaned twice a year and use premium gas. Proud QG18 owner here. My mechanic tell me doh use de cleaners, but I still put one in about a month before is time to do a tune up.

Strugglerzinc · Posted: Tue Jul 03, 2007 7:18 am Post subject:

for a moment i thought you meant QG18 in the Tiida ^^^

Nissan QG15DE, you can do what azis say. You would be surprised.

crossdrilled · Posted: Tue Jul 03, 2007 8:09 am Post subject:

[quote="Strugglerzinc"]for a moment i thought you meant QG18 in the Tiida ^^^

QG will not fit in a Tiida. the HR and MR engines specially made for that small engine compartment to boost interior space and legroom. Because of the pushing forward of the firewall, the Tiida has more legroom than a Cifero.

D QG18DE in my bluebird. It has 1 O2 sensor after the cat and headder. The california model sentra have 4, on the headder before the cat on each pipe I think. For emission regulations I guess. The american sentra shop manual for the QG18/ QR25 is downloadable on the net. Worked well for my car.

Mr QG15,
You had that headder made or aftermarket? What did you do with your O2 sensor and emmisions control? Also, think you should put some insulation on that (Lagging)

soundconcept · Posted: Wed Jul 04, 2007 10:30 am Post subject:

Got one.

Need someone to change HEAD GASKET asap.

Looking for someone who can do it at my house.

pm me or call 372-3688 .

Nissan QG15DE · Posted: Thu Jul 05, 2007 2:45 pm Post subject:

bhagan, i got it made by Imraj and Brothers. I still have the O2 sensor on the vehicle, Imraj headers were design to use the emmisions control for my type of engine.

Nissan QG15DE · Posted: Thu Jul 05, 2007 2:48 pm Post subject:

azis · Posted: Fri Jul 06, 2007 10:09 am Post subject:

i did my headers by imraj also(on meh old b15).... they did nice work, very neat and clean and worked very well......but my friends use to make fun of me cause after the headers i got a kind of rotary sound when it idling and running
but it worked well

Rodn3y · Posted: Mon Jul 09, 2007 9:00 am Post subject:

i install headers on my qg16 and i gettin ah kinda hissin sound when i hit d gas, n d car makin more noise (engine) when it idling.... is dat normal ?

Nissan QG15DE · Posted: Mon Jul 09, 2007 1:12 pm Post subject:

someone904 · Posted: Mon Jul 09, 2007 2:10 pm Post subject:

qg 15 all d way......for now.....start with out ANY hesitation, real quite at idle,like a stealth machine Wink

crossdrilled · Posted: Mon Jul 09, 2007 2:31 pm Post subject:

Did anyone tune their cars after the headder swap, or run consult to see if there were any changes to how rich or lean they running?

Rodn3y · Posted: Tue Jul 10, 2007 9:54 am Post subject:

So NISSAN QG15DE u did 2" right though ?
did u put bac a resonator and silancer or jus a resonator?
did u wrap d extractors in heat resistant material? cuz i kinda worried about the extra heat comin off the extractors.
cud u give me d price to do the 2" from the extractor to the end (bumber)... if u can remember........

crossdrilled · Posted: Tue Jul 10, 2007 10:02 am Post subject:

I have seen that many headders are lagged. I believe that this keeps the hot gasses hot, so that they are better cleaned by the CAT and because hot gasses flow better.