Project - GA15.5DET (Update-Engine started, Video clip pg1)

Dave · Posted: Tue May 20, 2008 9:16 am Post subject:

just be wary, when porting cylinders on GA engines, the walls are so thin, u can actually develop cracks between the ports

Maserati · Posted: Tue May 20, 2008 12:40 pm Post subject:

looking like a nice project.

miguel granville · Posted: Tue May 20, 2008 5:50 pm Post subject:

cool project

kerron01 · Posted: Wed May 28, 2008 11:04 pm Post subject:

Hey guys, Sorry for the delay but I have exams and its gonna be over June 8th, so till then! Can't wait to finish this Project and share the info with you all. Smile

Stuckindmud · Posted: Wed May 28, 2008 11:59 pm Post subject:

Kerron01 , it looks like the turbo in the pic is tilted, wouldnt that cause problems with the oil flow, possibly blowing the seals on the turbo ?

THE SYNDICATE · Posted: Thu May 29, 2008 6:34 am Post subject:

sweet project bro...........good luck!

keep us updated !

*another beast in the makin*
Twisted Evil

GTiR 14 · Posted: Thu May 29, 2008 7:47 am Post subject:

*waiting patiently Cool

*

EarthQuake · Street 2NR Joined: 01 May 2008 Tech posts: 94 My 2NRide:

well done man

go forward hard

AYE_SOLDIER · Posted: Thu May 29, 2008 12:00 pm Post subject:

yer big up man!
i always wanted to a build just like yours so i'm looking forward to seeing your work

Nissan QG15DE · Posted: Thu May 29, 2008 11:07 pm Post subject:

great, very impressive

kerron01 · Posted: Fri May 30, 2008 12:24 am Post subject:

Thanks for the encouragement guys, when its finished I'll like to dyno. . . The next step is getting the exhaust piping together, looking at 2.5''. Can any one point me in the right direction to get the pipe at good cost?

X_Factor · Posted: Sun Jun 01, 2008 1:07 pm Post subject:

u may consider doing polyurethane mounts for ur engine and tranny,
PM yukazza on he forum and see if he could get a set of energy suspension cradle bushings for u..i put them on my b14 and its sweet
i also saw someone selling a set of tein springs and tokico shocks on the forum..depending on ur present set up...if its better

btw..i wanna know what fabrication if any, you needed to do for the ga16de intake manifold to bolt up on the 15's head? and what i may need to modify for me to do such?

btw...ur piping..someone on monroe road in chaguanas, from the highway side does the piping for approx. 800.00(well thats what my cuz paid to put 2.5 in his primera )..i think its the first off the highway side

JDM_GUY · Posted: Tue Jun 03, 2008 7:31 pm Post subject:

Good luck man, have been hearing about this for quite a wile. Cant see the numbers it puts down. and the ET it gets Wink

Ill prob match it up to the HONDA if its up for the challenge Mr. Green

kerron01 · Posted: Sun Jun 08, 2008 11:35 pm Post subject:

Exams are over now, the project can now continue!! ^ Whats that Honda vs Nissan ?? Just bring it, Laughing

.

Picasso · Posted: Mon Jun 09, 2008 12:43 am Post subject:

^^ that's the spirt!

scotty_buttons · Posted: Mon Jun 09, 2008 8:20 pm Post subject:

kerron, when we puttin in the engine man?? let me know if it's tmrw or wednesday..from wednesday afternoon i would not be available til nex week monday Shocked

wednesday might b better tho cuz i may go out tmrw..we go tlk na..

turbohead · Posted: Mon Jun 09, 2008 11:08 pm Post subject:

ey hear nah in the pics wen you was grindin the head at the valves and said it lowering compression..i know it wud enlargin the combustion chamber but was it done equally 2 all chambers or was guess an choice? remember i not fleckin you up jus askin a question enlighten me cuz i wud like 2 know for further notices

SlimThug · Posted: Tue Jun 10, 2008 3:16 pm Post subject:

well done de boss, well be lookin out for you on the streets

gracen · Posted: Tue Jun 10, 2008 3:29 pm Post subject:

Hos turbo little big fuh dah engine

kerron01 · Posted: Tue Jun 10, 2008 4:35 pm Post subject:

^You mean a little to SMALL Twisted Evil