Project - GA15.5DET (Update-Engine started, Video clip pg1)

kerron01 · Last edited by kerron01 on Sat Jun 21, 2008 10:59 pm; edited 10 times in total

Hey guys, I have started a small project and have been gathering some parts and research for some time now. Finally it has started coming together. The Project is about turbo charging a Nissan GA15.5DE. The block is a 1999yr GA16DE and the head is a OBDI GA15DE and I'm using the 1999yr GA16DE intake manifold with injector rail and TB.

The parts allocated for the build are: EMU: Greddy Emanage blue with 3 BAR MAP sensor, injector harness, ignition harness and USB support cable. Turbo: Garrett T28 (from skyline). BOV: Turbo Smart Vee Port. Fuel Pump: JECS (RB20DET pump). FPR: Mallory Ignition 4305m. Air filter: K&N cone filter. Turbo Manifold: Custom made (40 schedule steel). Oil lines - Braided stainless steel lines. Intercooler: FC RX7 stock IC. Injectors: 370cc side feed. Radiator: double core copper/brass. Fan: slim line turbo fan (for radiator). Spark Plugs: NGK IX (heat range 6). Muffler: 2.5" in (free flow).

The compression in the combustion chamber was dropped and the exhaust ports were ported for better flow.

The engine is going in to a Nissan Sunny 4WD B14. Pictures will be uploaded in time to come.

UPDATE

Some low res photos of project in progress:

Head before it was cleaned

Head cleaned just waiting to be ported and worked on Very Happy

Lowering compression on head Shocked

Charlie doing his stuff, wait till u see his project on the road #skured

Copper spray was applied to head just waiting to be placed on the block

Exhaust port ported

Thanks Sheldon for selling me that A class block!!

Head on block

Turbo manifold version 1

Turbo manifold version 2.0

GA16DE intake manifold on the GA15DE head

Scotty_buttons tuning the system

Thats where the GReddy hides

UPDATE

Engine was properly cleaned and painted.

UPDATE

Car was lifted so that engine would be removed from under it.

Engine was lowered from the engine bay. (4wd tranny showed here)

4wd LSD transmission, very big and also heavy. Shocked

UPDATE

Project Engine attached to 4wd Transmission.

Project Engine being put in place.

Video clip
Engine started in car. (with out turbo, maf and some other parts)

More to come soon!!

I would like to thank sr20ve and wrxdevil for support when needed.

GTiR 14 · Posted: Sat May 17, 2008 7:30 am Post subject:

I will be following up on your build man. Maybe I can get some pointers for my own.

Good luck

A-1 Superior Tech · Posted: Sat May 17, 2008 9:29 am Post subject:

Finally you make the project thread, rel bess project here, everything done properly

megadoc1 · Posted: Sat May 17, 2008 6:29 pm Post subject:

i got my eyes on you buddy

Mr_RSN · Posted: Sun May 18, 2008 11:12 pm Post subject:

Good luck with the project bro Twisted Evil

I've got some sneak peaks of his progress thus far, everything seems to be coming along smoothly Wink

Picasso · Posted: Mon May 19, 2008 12:31 am Post subject:

Nice project boss! You might suffer a bit with power because its 4WD but she will be fun! Is the car going to be manual or automatic?

A-1 Superior Tech · Posted: Mon May 19, 2008 8:41 am Post subject:

Auto for the while, manual soon after Mr. Green

megadoc1 · Posted: Mon May 19, 2008 10:02 am Post subject:

i had this thing on the shelf for a while
i will restart as soon as i see this thing come
this was the real reason for me joining trinituner

scotty_buttons · Posted: Mon May 19, 2008 8:41 pm Post subject:

nice project man! lol..hope it starts up soon..i cant wait nuh! pics should be up soon..

turbonator · Posted: Mon May 19, 2008 8:53 pm Post subject:

^^ U serious Shocked

I does drive ah b-14 in wid ah GA15DE and when I feel d power of ah GA16DE in ah b-13 I nearly shite myself Surprised

. It was a bigg difference.

scotty_buttons · Posted: Mon May 19, 2008 9:01 pm Post subject:

hahaha..well i drive a couple ga16s..n is either all ah dem poorly maintained..or..ur ga15de poorly maintained..or i jus lucky Neutral

scotty_buttons · Posted: Mon May 19, 2008 9:12 pm Post subject:

Project GA15.5DET pics

Mr_RSN · Posted: Mon May 19, 2008 9:24 pm Post subject:

sweet

Picasso · Posted: Mon May 19, 2008 9:40 pm Post subject:

If you had gone with a T28 from the Pulsar GTiR when boost sets in yuh goh have to brace yuh self Laughing

megadoc1 · Posted: Mon May 19, 2008 9:58 pm Post subject:

yes keep it coming nice

Picasso · Posted: Mon May 19, 2008 10:08 pm Post subject:

^^ could be a thicker head gasket or pistons were changed I guess..

.:PROZAC:.. · Posted: Mon May 19, 2008 10:32 pm Post subject:

AFAIK there are no thicker head gaskets for the GA 15, unfortunately.
The only low compression pistons that you can use that have the right length are from the E15 ET and the block needs to be bored some. The head when you look at it has little you can do either. Mind your boost and fuel my 15 graveyard full at teh moment.

megadoc1 · Posted: Mon May 19, 2008 10:37 pm Post subject:

i used e15 pistons a time but thaz another story
i wanna know what rods he used

demented · Posted: Tue May 20, 2008 8:12 am Post subject:

nice project......keep us updated.

Knight1 · Posted: Tue May 20, 2008 8:21 am Post subject:

Nice project.

Turbo looks a little big for the GA15 though....with low RON gas and all.