Project 4e Tercel

xtech · Posted: Wed May 28, 2008 10:06 am Post subject:

it over heat Confused

...........i see men online upgrade d turbo an run civic radiators cause d turbo to big.
Civic radiators is way smaller than yuh OEM an no probs an if nobody really drive it why it doing dat. Oh since u r auto did u invest in a tranny cooler i running one since i got d stock Laser manual radiator engine temp always low.

Anybody have a air/fuel gauge installed? Anyone ever saw rich readings. I think i need a new Oxygen sensor some days i see very lean an others it stays on Stioch exact center of it never more.

Terran · Posted: Wed May 28, 2008 11:03 am Post subject:

reddo_tuner · Posted: Wed May 28, 2008 12:24 pm Post subject:

the radiator needed to be flushed.Terran, thanks for the offer,but i spoke with the guy, he will come for the car monday, i give him the list, he says he will be done by wednesday. no additional cost.

reddo_tuner · Posted: Wed May 28, 2008 12:25 pm Post subject:

I have a question, can the starlet cluster ( instrument panel) work in my tercel ? my old one cannot work with this engine.

reddo_tuner · Posted: Wed May 28, 2008 12:27 pm Post subject:

xtech · Posted: Wed May 28, 2008 12:42 pm Post subject:

I guess it does. Seems like the Celica GTS 88 also works.
But how come it does not work? I know you missing the tach but u could always get it aftermarket.

The gauge cluster that comes in my Laser works fine. Tach/Speedo/Temp/Warning lights

http://board.tercelonline.com/viewthread.php?tid=33094\

http://www.cardomain.com/ride/808004

http://www.youtube.com/watch?v=sad28Tnf2Rw

reddo_tuner · Posted: Wed May 28, 2008 1:15 pm Post subject:

xtech, i have a small tach, but i need to know whether it makes sense to buy the cluster. if it doesnt fit, i will have to find another that works...

sleepertercel · Posted: Wed May 28, 2008 1:58 pm Post subject:

reddo_tuner · Posted: Wed May 28, 2008 2:12 pm Post subject:

question is: which one does droppa have? ep91 or 82, i think 82...

droppa · Posted: Wed May 28, 2008 2:25 pm Post subject:

for this boost guage to work, what sensor is needed, and where is it located.... Question

xtech · Posted: Wed May 28, 2008 2:37 pm Post subject:

ent dat is controled by a vaccum line not electric sensor

droppa · Posted: Wed May 28, 2008 2:58 pm Post subject:

vaccum line to sensor that converts to elect signal Rolling Eyes

xtech · Posted: Wed May 28, 2008 3:16 pm Post subject:

well boy keep rolling yuh eyes....... i got a Phantom boost guage an i run vaccum line straight to d intake mani.......

if u was talking bout the boost gauge in d starlet cluster me nah know nutting bout dat one if u say it is electric it could take readings from ecu boost signal input wire.

droppa · Posted: Wed May 28, 2008 3:48 pm Post subject:

are now yuh clickin....link mih up where ah cud get ah wiring diagram.... Mr. Green

xtech · Posted: Wed May 28, 2008 3:55 pm Post subject:

i already posted dat up a few pages back page 7 could be pin 4 or 15

reddo_tuner · Posted: Wed May 28, 2008 10:57 pm Post subject:

Click for full-size.

the first is the exhaust manifold not connected and the second, the engine

Zeriam · Posted: Wed May 28, 2008 11:19 pm Post subject:

yuh nEED somE purplE blastER dey fadda

reddo_tuner · Posted: Wed May 28, 2008 11:45 pm Post subject:

dmitc · Posted: Thu May 29, 2008 2:26 am Post subject:

to clean the engine bay

reddo_tuner · Posted: Thu May 29, 2008 8:36 am Post subject:

where can i get that...