| View previous topic :: View next topic |
| Author
|
Message |
axe 3NE 2NR for life
Joined: 02 May 2007 Tech posts: 170 Location: central My 2NRide: Nissan B14 Sentra
|
Posted: Tue Jun 12, 2007 8:52 pm Post subject: |
|
|
| a piece of advice on saloon filter cleaning...a friend of mine has a brand new almera...and i always found that the ac. was freezing when compared to mine...one day i jus took out my saloon filter and it was full of pine leaves and clogged with dirt (i cant call it dust)...i shook out the muck and washed it, dried it and put it back.....i have ac. like a brand new almera now...real cold...lol |
|
| Back to top |
|
 |
|
|
 |
Anil_Sooknanan TriniTuner 24-7
Joined: 16 Nov 2006 Tech posts: 1755 Location: Freeport My 2NRide:
|
Posted: Tue Jun 12, 2007 9:07 pm Post subject: |
|
|
| ok lights if you brakes light stuck on then the bushing from the switch fell off from by the brakes pedel |
|
| Back to top |
|
 |
Anil_Sooknanan TriniTuner 24-7
Joined: 16 Nov 2006 Tech posts: 1755 Location: Freeport My 2NRide:
|
Posted: Tue Jun 12, 2007 9:18 pm Post subject: |
|
|
| oh axe, yea boy all them man them bawling they ac eh colding but them fools at the ac place saying it need gas and taking yuh money and them eh know that a lot of cars have and some don't have filters all of them clog don't matter the make of the cars i serviced a few and men like they self |
|
| Back to top |
|
 |
Dragsta punchin NOS
Joined: 06 Nov 2006 Tech posts: 2927 Location: central My 2NRide: Ford Ranger
|
Posted: Tue Jun 12, 2007 9:21 pm Post subject: |
|
|
^^ok cool....
| Quote: |
a piece of advice on saloon filter cleaning...a friend of mine has a brand new almera...and i always found that the ac. was freezing when compared to mine...one day i jus took out my saloon filter and it was full of pine leaves and clogged with dirt (i cant call it dust)...i shook out the muck and washed it, dried it and put it back.....i have ac. like a brand new almera now...real cold...lol
|
axe, what filter is that ur talkin bout? is it the air filter for the engine or there is a seperate filter for the A/C....and where that filter located  |
|
| Back to top |
|
 |
Anil_Sooknanan TriniTuner 24-7
Joined: 16 Nov 2006 Tech posts: 1755 Location: Freeport My 2NRide:
|
Posted: Tue Jun 12, 2007 9:31 pm Post subject: |
|
|
| some one also asked how come there brakes lights dim , its because the grounding is not good |
|
| Back to top |
|
 |
Dragsta punchin NOS
Joined: 06 Nov 2006 Tech posts: 2927 Location: central My 2NRide: Ford Ranger
|
Posted: Tue Jun 12, 2007 9:34 pm Post subject: |
|
|
^ what causes...when u mash brakes, d indicator lights lighting too  |
|
| Back to top |
|
 |
Anil_Sooknanan TriniTuner 24-7
Joined: 16 Nov 2006 Tech posts: 1755 Location: Freeport My 2NRide:
|
Posted: Tue Jun 12, 2007 9:52 pm Post subject: |
|
|
| a bad ground can also cause that because instead it take a ground from the indicator |
|
| Back to top |
|
 |
Anil_Sooknanan TriniTuner 24-7
Joined: 16 Nov 2006 Tech posts: 1755 Location: Freeport My 2NRide:
|
Posted: Tue Jun 12, 2007 9:53 pm Post subject: |
|
|
| so it's like a series circuit |
|
| Back to top |
|
 |
Anil_Sooknanan TriniTuner 24-7
Joined: 16 Nov 2006 Tech posts: 1755 Location: Freeport My 2NRide:
|
Posted: Tue Jun 12, 2007 9:57 pm Post subject: |
|
|
| how about when you mash the brakes the park light comes on or when you put on the park light the brakes light too this is because one of the light (doublr contact) blow and the filiment in the light shorts the both park and brakes and make them light together |
|
| Back to top |
|
 |
Dragsta punchin NOS
Joined: 06 Nov 2006 Tech posts: 2927 Location: central My 2NRide: Ford Ranger
|
Posted: Tue Jun 12, 2007 9:59 pm Post subject: |
|
|
and what causes dem balsted bulbs to blow every month  |
|
| Back to top |
|
 |
Anil_Sooknanan TriniTuner 24-7
Joined: 16 Nov 2006 Tech posts: 1755 Location: Freeport My 2NRide:
|
Posted: Tue Jun 12, 2007 10:02 pm Post subject: |
|
|
| lol same thing again bad ground if you understan ohms law you would understand clearly that happens in house wiring too |
|
| Back to top |
|
 |
Dragsta punchin NOS
Joined: 06 Nov 2006 Tech posts: 2927 Location: central My 2NRide: Ford Ranger
|
Posted: Tue Jun 12, 2007 10:11 pm Post subject: |
|
|
Ohm's law states that, in an electrical circuit, the current passing through a conductor from one terminal point on the conductor to another terminal point on the conductor is directly proportional to the potential difference (i.e. voltage drop or voltage) across the two terminal points and inversely proportional to the resistance of the conductor between the two terminal points. In mathematical terms, this is written as:
V = I/R
 |
|
| Back to top |
|
 |
Anil_Sooknanan TriniTuner 24-7
Joined: 16 Nov 2006 Tech posts: 1755 Location: Freeport My 2NRide:
|
Posted: Tue Jun 12, 2007 10:16 pm Post subject: |
|
|
so if R is increase what happens???  |
|
| Back to top |
|
 |
Maserati TriniTuner vip
Joined: 26 May 2003 Tech posts: 7488 Location: YYC My 2NRide:
|
Posted: Tue Jun 12, 2007 10:51 pm Post subject: |
|
|
| Anil_Sooknanan wrote: | | arite seems like you right people really reading and not saying anything |
yea ppl is read man jus dont post sometimes
but good thread!!  |
|
| Back to top |
|
 |
axe 3NE 2NR for life
Joined: 02 May 2007 Tech posts: 170 Location: central My 2NRide: Nissan B14 Sentra
|
Posted: Tue Jun 12, 2007 11:13 pm Post subject: |
|
|
| actually i did approach an ac. repairs spot and they told me it will cost $250 in labour to FIND the filter an clean it!!....i went on the net and did it all in (i kid u not) 10 mins!!!! (an save meh hard earned $250)..... |
|
| Back to top |
|
 |
Anil_Sooknanan TriniTuner 24-7
Joined: 16 Nov 2006 Tech posts: 1755 Location: Freeport My 2NRide:
|
Posted: Tue Jun 12, 2007 11:20 pm Post subject: |
|
|
| see wha i mean glad yuh thinking bro and not fulling them pocket in 10 mins |
|
| Back to top |
|
 |
Anil_Sooknanan TriniTuner 24-7
Joined: 16 Nov 2006 Tech posts: 1755 Location: Freeport My 2NRide:
|
Posted: Tue Jun 12, 2007 11:20 pm Post subject: |
|
|
| see wha i mean glad yuh thinking bro and not fulling them pocket in 10 mins |
|
| Back to top |
|
 |
axe 3NE 2NR for life
Joined: 02 May 2007 Tech posts: 170 Location: central My 2NRide: Nissan B14 Sentra
|
Posted: Tue Jun 12, 2007 11:31 pm Post subject: |
|
|
| ive heard that a dirty engine (grime and oil etc) retards engine cooling?..is this true?..an how should one wash their engine?...i use purple blast degreaser (ok sometime kerosene)...wash off with spray nozzle, then WD 40 meh whole engine when it dry out...any thoughts on this? |
|
| Back to top |
|
 |
axe 3NE 2NR for life
Joined: 02 May 2007 Tech posts: 170 Location: central My 2NRide: Nissan B14 Sentra
|
Posted: Tue Jun 12, 2007 11:33 pm Post subject: |
|
|
| anil i will call u bout the brightening lights thing...ah jus brokes like dog these days!!!.....when ah do sumting bout that i will then check yuh...lol |
|
| Back to top |
|
 |
Maserati TriniTuner vip
Joined: 26 May 2003 Tech posts: 7488 Location: YYC My 2NRide:
|
|
| Back to top |
|
 |
|
|
|