MIDLINE SUGGESTION!!!

skellyuno · Street 2NR Joined: 09 Feb 2006 Tech posts: 75 My 2NRide:

ppi pcx 2400 -playing 4 RCF l10750yk
ppi pcx 480-playing 2 RCF n850 drivers

wanna know if there is a big difference in sound with this setup vsbelow?

ppi pcx 2400 -playing 2 RCF l10750yk
ppi pcx 480-playing 2 RCF n850 drivers
2 6" B&C PEV 13

basically the difference in them is four tens in the first install and front stage midrange speakers and two tens in the second one.

any opinions?

viking1705 · Posted: Thu Jan 21, 2010 11:16 am Post subject:

the pcx 2400 was not designed to play a 2ohm load bridged although it will do it it is not recommended.i would prefer the second option maybe you can switch off the tens for 12" rcf or b&c.and if u decide to sell them ppi amps check me.lol

skellyuno · Street 2NR Joined: 09 Feb 2006 Tech posts: 75 My 2NRide:

lol nah no sell at all!!!

noyztoyz · Posted: Thu Jan 21, 2010 4:31 pm Post subject:

That ppi amp would bun down 2 rcf 10s within minutes, You would have to turn it down, and thats wasting power.

And seeing that 2 10s normally make a 3.2 ohm load, 4 would be a 1.6 ohm load the amps is seeing when bridged
bear in mind it was designed for 4 ohm loads.

You need a pair of 12s pal,
step up your game

I have a pair of 18sound 12s yuh could get, They will take the full amp,

the 2 12s on the ppi amp was as loud than my pals car with 4 10s rcf on 2 800.2 rockford.

skellyuno · Street 2NR Joined: 09 Feb 2006 Tech posts: 75 My 2NRide:

if i goin 12s i goin RCF lol,

noyztoyz · Posted: Thu Jan 21, 2010 11:06 pm Post subject:

the ppi would bun down the rcf 12l750 speakers pal,