MAZDA People United

neckto · Posted: Thu Sep 08, 2005 2:31 pm Post subject:

yea for the price i maight as well get an SR

well mine real old i think it's the E3 model but i was very badly maintained by the previous owners it burning real oil and oil leaking out by distributer and other places and the head gone too look like ignition rackling tappits playing pan oil comming up and fowling the spark plugs but i want more power as well so dais y i wanna change

anyways

i just found a Z5 the man want $3500 complete but will that work with my tranny or will i have to something else to mate it with?
how bout the price and he calling $2500 for a E5 wah you all think?

katurbobeast · Posted: Thu Sep 08, 2005 5:49 pm Post subject:

ummm if u just want an engine into your 323, throw away the old E5 then go for the Z5 or ZL-VEvvt or the B6...yes it will drop straight in....

if u want to perform, go with nothing less than a BP or the new 1.8FS-DE .. ..and dont put an sr20 into your 323..its not worth it...a BP will give you the same power, and thats just disrespectful man....

ummm a g/box for a BP isnt hard to get....u can use any B series g/box or mazda 626 sohc g/box....thee new b6dohc g/box will work fine with power and your original your mount setup and also if u can get your hands on the bp FWD g/box; holds up to over 400whp...

dont buy a BP without the ecu!!
duh!! unless u plan to go AEM!!!

neckto · Posted: Thu Sep 08, 2005 9:24 pm Post subject:

so where can i buy a BP complete with g/box ecu etc
and at what price?

Computerman · Posted: Fri Sep 09, 2005 8:33 am Post subject:

neckto, you should budget at least 10K total for the swap (upgrade), even if you are putting in a B5 or BP....especially if this car is your daily driver!! If you are seriously going performance budget at least 20K!! Keep that in mind...it's never as simple as "dropping it straight in"! Exclamation

If you can get the E5 for 2K then it will save plenty headache and $$ just to drop that in!

neckto · Posted: Fri Sep 09, 2005 8:40 am Post subject:

ok i getting a B6 engine and tranny complete for $3500 would be easy to drop in as the E5?

neckto · Posted: Fri Sep 09, 2005 11:35 am Post subject:

mazda peeps if ya going in tha bamboo and find anythinginteresting let we know nah

one love

Computerman · Posted: Fri Sep 09, 2005 1:21 pm Post subject:

neckto, the E5 would be much easier. But the B6 is a much better engine. If you getting everything at that price that's a reasonable buy.

neckto · Posted: Fri Sep 09, 2005 3:03 pm Post subject:

cool thanks
well i just got laid off so i may be forced to go E5 now
lawd when would i get a break #faint

Computerman · Posted: Sat Sep 10, 2005 8:08 pm Post subject:

^^ That's rough man. Better keep it simple for a while. That's exactly what I did.

mazdamig · Posted: Sun Sep 11, 2005 1:42 pm Post subject:

So only two or three mazda ppl on the cross saturday night where all the other ppl.

press naes · Posted: Sun Sep 11, 2005 2:20 pm Post subject:

^^^^ rain ras!

wagonrunner · Posted: Sun Sep 11, 2005 3:19 pm Post subject:

and police. i fed up say lady hailes is not a place to have your car on a saturday night. they locked both ends, AGAIN, and it was tickets like rain, AGAIN.

neckto · Posted: Sun Sep 11, 2005 4:15 pm Post subject:

humjph
like if man doh have enuff debts as it is already

neckto · Posted: Sun Sep 11, 2005 4:23 pm Post subject:

hear this

ah BP (Not BPT eh!!) is 1.8 and ah Z5 is 1.5 giving 88HP so the BP have more Hp?
i know ah BP"T" giving bet 179-206 HP but entthe Z5 i newer so how much a BP jus so giving?

Computerman · Posted: Mon Sep 12, 2005 7:44 pm Post subject:

^^ Dis blasted road (highway) so congested iz no flippin point puttin nuttin to hot in yuh daily! Keep the 'heat' for your weekend car neckto!

katurbobeast · Posted: Mon Sep 12, 2005 10:01 pm Post subject:

anyone know if the 323f rear discs fit on a 323lx?

is the z5 g/box internals and strength the same as the B6?

neckto · Posted: Wed Sep 14, 2005 10:14 am Post subject:

i dunno about the g/box strenght but once it could be mated it should work well

anybody know which greabox could work with the Z5?

TurboDrive · Posted: Wed Sep 14, 2005 12:35 pm Post subject:

Anybody here ever had the speed limiter thingy removed from their engine? What are the pros and cons of having this done?

NEED4SPEED · Posted: Wed Sep 14, 2005 1:04 pm Post subject:

Which one of yall gurus could get me a hood with a sunroof for a 2000 323 asap

Computerman · Posted: Wed Sep 14, 2005 4:35 pm Post subject:

^^ I'll check to see if we have any crashed cars with sunroof when I go out Friday.

katurbobeast · Posted: Wed Sep 14, 2005 8:34 pm Post subject:

the Z5, ZL, B6 & ZM all interchange bolt for bolt.....

but i just wanna know whose put one to the test......cause im looking for a gearbox for my BP.....which im hoping gives me at least 160hp with some stand alone management...

those gearboxes are fairly new, with little wear. so i am hoping they would last, but i dont plan too be Dumping my clutch on every cruise i take..

the bamboo asking $2300, for the new B6 hydraulic box and setup w/axles, flywheel.

chinee23 · Posted: Thu Sep 15, 2005 10:44 am Post subject: where in the bamboo

where in the bamboo are you getting this gearbox, I need one.

katurbobeast · Posted: Thu Sep 15, 2005 12:15 pm Post subject:

u've got to look......
im gonna buy an entire setup this weekend, so i'll let yuh know...

katurbobeast · Posted: Thu Sep 15, 2005 5:07 pm Post subject:

by d way....
dis is my BP all painted...now waiting for rebuild.....

blue_toothbrush · Posted: Thu Sep 15, 2005 5:51 pm Post subject:

so how much wud a BPT go for in the bamboo? full everything wit gearbox....changin d 323 to manual....so was d price for this?

NEED4SPEED · Posted: Fri Sep 16, 2005 7:39 am Post subject:

doh forget me computerman

katurbobeast · Posted: Fri Sep 16, 2005 5:36 pm Post subject:

about 5500 with g/box...
and they only come 4wd...
so u've gotta get a box....

and the recommended FWD g/box is difficult to find.....them bamboo ppl dont cater for mazda or ford performance nuh.....!!!! harsh!!!

the G series BP FWD g/box can handle over 400whp.....its been proven with video and time slips...
i dont know where u gonna find a B6T g/box.....but u can get the G series hydraulic B6 gearboxes....
i dont know how much power they can take...!!

all G-series gearboxes are from the Twin Cam mazda engines...
the F series are from the SOHC mazda engines.....

the B6 hydraulic g/box and setup, w/axles, would cost you approx 2400

the F-series gearbox would cost you 1000 w/axles......i think its like 300 for the CV's....

blue_toothbrush · Posted: Fri Sep 16, 2005 5:45 pm Post subject:

so how wud it do on the 1/4 mile? wud the diff gearboxes hav diff effects on it on the track? BPT stock how wud it do in a 323

X2Board · Posted: Fri Sep 16, 2005 10:31 pm Post subject:

I have a local Mazda BJ with the B3 SOHC... can the A/C compressor from any other engine bolt up???
if so .. anyone have one for sale???
also .. i need an original deck for the 323 .. car came without one..
pm me with some details & prices if allyuh could help out nah .. thanx !

press naes · Posted: Sat Sep 17, 2005 11:11 am Post subject:

Allyuh should make ah Wallahs run, BPT powered Familia 4WD...all yuh questions, answered!

...& it would double as TRen lime too.

2fiddysevn forever!