MAZDA People United

katurbobeast · Posted: Tue Jul 12, 2005 8:11 pm Post subject:

i got it in poyeas.....they have 4 more left....but all have no g/box and no ecu...they have at least 2 in decent condition 'maybe'...
i got the best one...

i opened it up today and its awesome....clean like a whistle...
both of the camshafts are hollowed, and they have a high lift!!!
it comes with VICS intake manifold.....

bamboo marketing have about 3 coming in.....tomorow or by the weekend..!! dont know if its the old or new....but they gonna call good $$$ for it!

i'll post up some pics of the rebuild...

AcousticEng · Posted: Tue Jul 12, 2005 9:41 pm Post subject:

nice man.... good to see someone not putting a nissan in a laser. people dont know there is other options.

mazdamig · Posted: Tue Jul 12, 2005 10:37 pm Post subject:

Wednesday night have some drags. Fast mazda ppl come about 11.00pm and beat up some B14 for me.

mazdamig · Posted: Tue Jul 12, 2005 10:39 pm Post subject:

Damn drag on the cross. Twisted Evil

katurbobeast · Posted: Tue Jul 12, 2005 10:54 pm Post subject:

how the jail do I post pics dammit...

i need details on how to post pics....cause i aint getting through at all!!

Computerman · Posted: Wed Jul 13, 2005 9:40 am Post subject:

http://forums.trinituner.com/forums/viewtopic.php?t=21530

mazdamig · Posted: Wed Jul 13, 2005 10:29 pm Post subject:

The BP engine look like this

in the Bamboo or the older one

katurbobeast · Posted: Thu Jul 14, 2005 7:58 pm Post subject:

yea thats the beast....

im swapping it into a laser......right now im cleaning the entire engine and internals, then i'd paint it and then rebuild the motor with brand new bearings, gaskets and seals...

after its to complete the engine with ECU, wiring loom...complete the drivetrains and do the swap..over christmas

the BP comes with both hollowed cams, VICS, DPI, solid lifters, high comp pistons and electronic ignition....

is the B6 SOHC g/box the same as the B6Dohc

AcousticEng · Posted: Fri Jul 15, 2005 8:27 am Post subject:

u got the engine without ECU and harness? where are u getting that? theB6SOHC and DOHC is the same gearbox with small axles(laser axles), good up to 165HP. the B6 DOHC turbo box used big axles(626 type) has a bigger clutch and good up to 225HP. they both have the same bellhousings which mean they both will work on a BP engine.
oh here is some more BP pics for info :

this one is a new BP that a guy added a turbo.

and my personal favourite - a KL V6 in a KC laser!

Computerman · Posted: Fri Jul 15, 2005 7:33 pm Post subject:

All I want is de KL-V6 with a nice smooth Automatic Transmission! Mr. Green

I need to change de air intake....any suggestions ppl?

katurbobeast · Posted: Fri Jul 15, 2005 8:30 pm Post subject:

ok cool thanks for those pics man..!!

im going to be rebuilding the engine over a 2mth period, because i am gonna clean and paint the engine as well, then reassemble it and store it away until im ready to do the swap, which would be over christmas holidays!!

i disassembled the camshafts from the cyl-head and sprayed them with bel-ray 6in1, then wrapped them in a old t-shirt. i sprayed the solid lifters, cam-assembly and bolts with the 6in1 and stored them in plastic bags.
i left the valves in the cyl-head......
i disassembled the intake manifold as well to prep for painting....
i left the BLOCK assembled....

so from now until october i would be taking my time to clean and paint the engine and rebuild it with new gaskets and piston rings!!
do i have to change the piston rings?

if y'all wanna see pics....just let me know, i'll post em!!

PS: acoustic....poyeas have about 4 BPs left there....only maybe 2 are in good condition!! I believe B.M. brought in some BP's as well.....but they will cal real $$$ for it......BASTARDS

mazdamig · Posted: Fri Jul 15, 2005 11:16 pm Post subject:

Where is poyeas

mazdamig · Posted: Fri Jul 15, 2005 11:28 pm Post subject:

BPT in 323F

B6T in a other 323F

fiveforward · Posted: Sat Jul 16, 2005 12:19 am Post subject:

guys i am looking for 2nd gen FRONT suspension setup i.e
just shocks & springs really. Anyone knows where i can get
these to buy

btw mig. those r some beast pics dey boy

good luck with the install

katurbobeast · Posted: Sat Jul 16, 2005 8:31 am Post subject:

poyeas is in d back of d bamboo...

drive straight down the road, until u see a place on the right looking like an old concrete parking lot, turn right into that street...and its the first building on the left, with the big blue gates....next to boyzin!!

i think its one of the streets on the right just after the turn off for ramas and parabhus!!

katurbobeast · Posted: Sat Jul 16, 2005 9:16 am Post subject:

GTR Group A Rally Spec:
Mazda BPD 1800cc 210hp

GTR BPD 210HP, If you find this in the bamboo in your life, you've found something very priceless!!!

BP in a Laser, plenty of room for some goodies....

Bad Azz GTX

Just thought I'd post some pics..

X2Board · Posted: Sun Jul 17, 2005 7:56 am Post subject:

fellas can the manual tranny from the B3 (1.3SOHC )Engine work on the 1.6 DOHC??

mazdamig · Posted: Sun Jul 17, 2005 9:36 pm Post subject:

If the gearbox is F25M-R. Get the gearbox from a Z5 engine.

press naes · Posted: Mon Jul 18, 2005 10:06 am Post subject:

Yo, Team Renesis we on like that meing. It mighty ras...time for some mods.
Thanx to Avoidus & Acoustic Eng.

2fiddysevn forever

NEED4SPEED · Posted: Mon Jul 18, 2005 12:50 pm Post subject:

all kinda pics allyuh putin up but none from d last lime alyuh MOFO"s

AcousticEng · Posted: Tue Jul 19, 2005 9:49 am Post subject:

press naes · Posted: Tue Jul 19, 2005 2:31 pm Post subject:

Yeah mon AE, I'll check it out & holla@ya. Ah still have ah few bugs to sort out though...small ting...& we sneezing too, lol Cool

. Wham to Five & the project. Five ah call'n yuh out anytime yuh ready, aah-ite, Very Happy

.
Ah go talk to allyuh later.

2fiddysevn forever

katurbobeast · Posted: Wed Jul 20, 2005 6:00 pm Post subject:

the new BP for my KA....

i dont know who that is?

whos own is this?

mazdamig · Posted: Wed Jul 20, 2005 10:40 pm Post subject:

323F sport I saw a front cut of your car in the Bamboo by poyeas.It have the V6 engine you better go get that. katurbobeast they have no ECU and harness for the BP what the F@#k is that.

Aaron 2NR · Posted: Thu Jul 21, 2005 6:32 am Post subject:

^ yeah but dey not sellin the engine alone..

323fsport · Posted: Thu Jul 21, 2005 10:55 am Post subject:

yeah.. they ain't selling the engine alone... the last price they gave me was 14k.

Computerman · Posted: Thu Jul 21, 2005 12:09 pm Post subject:

katurbobeast · Posted: Thu Jul 21, 2005 3:14 pm Post subject:

well ok....i thought i mentioned it had no ecu or harness dude!!

i only bought it because im using aftermarket management...so y would i want the stock ecu anywayss...!!!

how much did he say for the BPs'?

and what the firetruck is up with 14k for the v6....that man drinks too much alco!!! unless it a complete engine package and its the 2.5KL-ZE
he's a mad man!!!

fiveforward · Posted: Thu Jul 21, 2005 6:32 pm Post subject:

aight beyotches here's the progress:

both engines out and on the ground, will take pices tomorrow
the intercooler has been installed, suspension kinda out, shifter
pedals mounted already.

ran into some problems but i am coping
have to change rims (i really doh have dat kinda cash)
pressah tuh find drop spring dong here so gonna have tuh chop for the hour (i really, until i can bring them in (didn't wanna do this 2)
most everything lines up (more or less).

a front cut is VERY heavy bwoy, no joke. I ketch MEH ASS tuh move
it from belmont using a cherry picker, a van, some rope, 2 jacks and
some other ratch stuff to south. but it's a learing process

BTW 323 if yuh looking for a KL-ZE engine there is 1 by the guy who i bought mines from and there is one in a blue 626 for sale currently. Or you can go 2.2 instead.

Cyar wait tuh ;earn the car proper jed. Ah BROKES but EXCITED Mr. Green

pres doh frighten ah coming fuh yuh jess now

kat nice project man