MAZDA People United

press naes · Posted: Sun Apr 09, 2006 11:56 pm Post subject:

My ******,
pull triggaz,
stack figgaz,
Woah, woah, woah

snitch ******,
broke ******,
not my ******,
No, no, no...

AcousticEng · Posted: Mon Apr 10, 2006 10:22 am Post subject:

Computerman · Posted: Mon Apr 10, 2006 1:55 pm Post subject:

Where the details and pics from Sunday???!!! Question

adri 2nr · Posted: Mon Apr 10, 2006 2:02 pm Post subject:

question...can rx7 front rotors be installed in a 323f(97-98 model)?..or iarethere any other bigger rotors than the stock size that can be put in for more stopping power..also would i have to change calipers? or will the stock ones work well?

katurbobeast · Posted: Mon Apr 10, 2006 8:20 pm Post subject:

acoustic, can u get rear discs for the laser?

AcousticEng · Posted: Mon Apr 10, 2006 11:27 pm Post subject:

yea boy ka. it on order though just pay down a half. its $1500.00 for the pair. I can get the handbrake cables bout $370.00 but in the laser you have to fabricate a bracket like i did in my car.

mazdamig · Posted: Tue Apr 11, 2006 10:30 am Post subject:

The mazda crew did not go drags to look at drags(know ppl know what they really did #Beer

).Time for AA you know who you are.

press naes · Posted: Tue Apr 11, 2006 12:25 pm Post subject:

Computerman · Posted: Tue Apr 11, 2006 1:22 pm Post subject:

^^

So what we organising for this long weekend??

katurbobeast · Posted: Tue Apr 11, 2006 2:04 pm Post subject:

acoustic, sorry man, thats too much money......

fiveforward · Posted: Tue Apr 11, 2006 6:54 pm Post subject:

^^ tooo much money Exclamation

i know it might seem expensive now but from what
i can see and been through u really can't put a
price on ur safety, especially when it comes to
stopping a car. My rear disc brakes were 1200 alone
and i still had to remachine them 4 hole $400

Computerman · Posted: Wed Apr 12, 2006 11:16 am Post subject:

^^ I feel I will need to upgrade my rotors sometime in the near future...need to be able to slow down when doing #'s on the highway! 4 wheel disc is nice to have but a better setup in front is best for me.

katurbobeast · Posted: Wed Apr 12, 2006 1:47 pm Post subject:

its old, incomplete and is for a Laser....sooooo!!!
yea its too much money....those things cost like 800 at that condition not 1500.......

i believe the MX3 can be worked up on the KA/KB/BD as well........

press naes · Posted: Wed Apr 12, 2006 6:39 pm Post subject:

man allyuh leave the people alone nah...

AcousticEng · Posted: Wed Apr 12, 2006 8:55 pm Post subject:

actually its for a 323GT very rare disc brake setup. Oh my bro now telling me he pay 1500 for everything including the cables, i getting bawlup here!. soo i its 1500 total sorry ka. But I mean if you getting it for $800.00 elsewhere go ahead i will not stop you.

AcousticEng · Posted: Wed Apr 12, 2006 9:22 pm Post subject:

http://forums.trinituner.com/forums/viewtopic.php?p=1226614#1226614

check this out fellas poor guy. so much requests so little time.

mazdamig · Posted: Wed Apr 12, 2006 9:24 pm Post subject:

Oh Lord ppl look at the pics on this site
#Shocked

http://www.msprotege.com/forum/showthread.php?t=123631499

Computerman · Posted: Thu Apr 13, 2006 1:27 pm Post subject:

AcousticEng · Posted: Fri Apr 14, 2006 8:27 am Post subject:

nah just now I will be stocking by me so gimme some time. I will be able to get the 10.2" front brakes like my car and you get to use back your caliper.

Computerman · Posted: Fri Apr 14, 2006 5:47 pm Post subject:

^^ If I ever get my car started then I can worry about brakes. Crying or Very sad

virtualspeedster · Street 2NR Joined: 13 Nov 2004 Tech posts: 31 My 2NRide:

wait nah this is not a forum as yet, but wha de arse,,,,,,,,,,,,,,,,,,,,any way ah looking for cradle bushings for my 626 pba series ...... would any bushings work or do i have to get specifically for the 626

Computerman · Posted: Tue Apr 18, 2006 7:39 pm Post subject:

Alrighty folks...went into the bamboo today...Bamboo Marketing have a few Mazda V6 Engine and Tranny's (some with brain) - $4000 Mr. Green

wagonrunner · Posted: Tue Apr 18, 2006 7:51 pm Post subject:

dadio · Posted: Tue Apr 18, 2006 7:59 pm Post subject:

whats up fellas?

well 1st of all, i never owned ah mazda car before....buh i contemplating buying a mazda 6 2.0L a/t.

anyone here knows about these cars .....and the pros and cons of this car?
so far most reviews found on the net are pretty good...wha u all thinka s mazda ppl?

Computerman · Posted: Tue Apr 18, 2006 8:49 pm Post subject:

wagonrunner · Posted: Wed Apr 19, 2006 12:47 am Post subject:

computerman,
that would have been the engine for you buddy. i remmber when lester did that convo in his PAW 323LX.

dadio · Posted: Wed Apr 19, 2006 7:41 am Post subject:

Computerman

i also prefer d 2.3L mazda6, but the price diffrence to import this car would be too much (duty and motor vehcile tax)....so i hadda consider the 2.0L engine.

i like d mazda6 cause of it's balance in sport/luxury, and also cause it's not a very common car

blue_toothbrush · Posted: Wed Apr 19, 2006 9:08 am Post subject:

WEll its a damn good car but don't think it to be too happy on gas mileage. From some reviews on the net of the Mazda 6/Atenza users get around 22 - 25mpg (average) with the Mazda 6/ Atenza.

fiveforward · Posted: Wed Apr 19, 2006 12:45 pm Post subject:

virtual>> budget & gayahs on cipero street have it $150 4 2 i think. But i would recommend you doing them over in teflon or poly they would last much longer althought the price is abot $150 per bushing. Or go in the bamboo n' look 4 a foreign used cradle.

daido>>brudda u sauce my ting yet!

AcousticEng · Posted: Wed Apr 19, 2006 1:07 pm Post subject:

five yuh get though with d ECU?? if not check meh