maximizing the power on d hyndai 4G67

gracen

yo fellas hav a 4G67 in meh C62A lancer want to no what ah could do to boost it up

Zh@ne · Posted: Mon Oct 15, 2007 8:24 am Post subject:

start with the basic .. H/I/E

a good set of headers and down pipe 4-2-1 for street use 4-1 for more racing app.
a brand name intake like K&N ... and if you can afford for the polish piping as well
and a proper exhaust system piping and barrel to suit your outer flow.

that shout give a nice 10% boost...

gracen · Posted: Mon Oct 15, 2007 7:43 pm Post subject:

yes ah was thinking hout d k&n but ah hav ah barrel filter and d O2 sensor right up in it an want 2 no if ah could use ne other air flow sensor 2 replace it 2 use 2 k&n and it hah no room 2 just put d nozel at d end plus ah looking for a tranny oil cooler. 4G67 in hyundai is A.K.A d G4CN thanks in advance

Zh@ne · Posted: Tue Oct 16, 2007 8:28 am Post subject:

this site is where i get most of the Hyundai to Mistsu related parts

for the oil cooler yuh could check this out:
http://www.cosmoracing.com/productinfo.asp?cid=247&pid=1061

I know about the your problem regarding the air filter - your type is where the air flow sensor "not o2 just that so you know" is made up inside the air filter itself. If that is the case the NO you can't replace it , it was solely design for that specific location and would give the ECU incorrect readings if changed or replaced. Your only two options would be to install a E-management to get rid of it or find an adapter air filter to accommodate it .
http://www.cosmoracing.com/productinfo.asp?cid=153&pid=437

^^ it should look something like that ....

gracen · Posted: Tue Oct 16, 2007 8:17 pm Post subject:

i'm also looking for a pair of rear disc brakes do u no wat car i can get it from Razz

Zh@ne · Posted: Wed Oct 17, 2007 8:25 am Post subject:

lol i cah help yuh with that most i could tell yuh is check bamboo Mr. Green

gracen · Posted: Wed Oct 17, 2007 7:47 pm Post subject:

alright