LS vtec oil supply

N1 · Ricer Joined: 05 Apr 2006 Tech posts: 16 My 2NRide:

Where can i obtain a tee to fit in the original oil pressure unit location. Any one can help? It would be appreciated. Tee must NOT be brass though.

N1 · Ricer Joined: 05 Apr 2006 Tech posts: 16 My 2NRide:

De Dragon · Posted: Fri Jul 11, 2008 4:01 pm Post subject:

Check Trinidad Hose or any hydraulic supply place.

trincivic · Street 2NR Joined: 12 Dec 2003 Tech posts: 79 My 2NRide:

It will be very difficult. The original fitting is a 1/8 BSPT fitting. You should get a 1/8 NPT tap and retap then use readily available 1/8NPT union and tees

red_dragon · Street 2NR Joined: 08 Apr 2004 Tech posts: 78 My 2NRide:

Trinidad hose carrying AEROQUIP FITTING little costly
but i got all mine there to run the oil line

De Dragon · Posted: Sun Jul 13, 2008 8:48 pm Post subject:

If its within your budget you can try this
http://www.full-race.com/catalog/index.php?cPath=22_716_960

red_dragon · Street 2NR Joined: 08 Apr 2004 Tech posts: 78 My 2NRide:

^ actual I was goin with that but time did not permit

you are better off buying the kit if you have to but the things separate or locally it gonna cost lots more