| View previous topic :: View next topic |
| Author
|
Message |
infinite_RPM Sweet on this forum
Joined: 17 Mar 2008 Tech posts: 330
My 2NRide:
|
Posted: Mon Jan 18, 2010 6:37 pm Post subject: Lacking midbass |
|
|
| My gallery setup is lacking frequencies between 60 and 120Hz.... I was thinking to put in a small woofer (8" or 10") and tune high to produce these frequencies.. I really dont know what sub to use... i have about 300-400 to spend... any suggestions? |
|
| Back to top |
|
 |
|
|
 |
slacker_jack Shifting into 6th
Joined: 31 Jul 2007 Tech posts: 2188 Location: hiding from 'turban totee' aka Leroy. My 2NRide: Nissan Almera
|
Posted: Mon Jan 18, 2010 7:07 pm Post subject: |
|
|
| been there considered that, try some sound barrier's, zebra's or hurricane's. |
|
| Back to top |
|
 |
evolution7tt 3NE 2NR for life
Joined: 21 Oct 2003 Tech posts: 206 Location: South My 2NRide:
|
Posted: Mon Jan 18, 2010 7:43 pm Post subject: |
|
|
| Someone selling a RF P1 8 inch and a kicker 8 inch on the forums. Well within your price range. Do a a search. |
|
| Back to top |
|
 |
noyztoyz 3NE 2NR Power Seller
Joined: 21 Jun 2007 Tech posts: 618 Location: all over My 2NRide:
|
Posted: Mon Jan 18, 2010 7:49 pm Post subject: |
|
|
what your gallery setup is?
my gallery system has lately been throwing off car alarms with midbass and low mids when i playing rap , u need to check me for a hear  |
|
| Back to top |
|
 |
(...Rovin...) 3NE 2NR Power Seller
Joined: 21 Jan 2006 Tech posts: 3996 Location: Chaguanas My 2NRide:
|
Posted: Mon Jan 18, 2010 7:50 pm Post subject: |
|
|
how do u know its lacking in this bandwidth ?
for gallery sets d lpf is usually set at 80hz & bass for these kind of sets usually shine from high 30s-80hz
if 60-80 is lacking in ur bass & if ur deck has a EQ then try boosting those freqs slightly in ur deck or processing & listen to d result ...... |
|
| Back to top |
|
 |
infinite_RPM Sweet on this forum
Joined: 17 Mar 2008 Tech posts: 330
My 2NRide:
|
Posted: Mon Jan 18, 2010 8:00 pm Post subject: |
|
|
i set the low pass and subsonic for the bass 30-80Hz and the mids crossed at 80hz...it not designed to play that low so it will start to distort when i turn it up... so i tuned it higher...my mids match the bass now but from 60-120 is kinda non existant...
btw my setup is 2 6"dls in front
2 8" soundstreams in the back
1 mtx 12" tr75 (in horn loaded enclosure)
PB asa1000.1dx
ss xta 480.2
i was checking out some audiopipes to buy |
|
| Back to top |
|
 |
(...Rovin...) 3NE 2NR Power Seller
Joined: 21 Jan 2006 Tech posts: 3996 Location: Chaguanas My 2NRide:
|
Posted: Mon Jan 18, 2010 8:04 pm Post subject: |
|
|
| try disconnecting d 8s & listen if u get more midbass from d 6.5" in front .... |
|
| Back to top |
|
 |
noyztoyz 3NE 2NR Power Seller
Joined: 21 Jun 2007 Tech posts: 618 Location: all over My 2NRide:
|
Posted: Mon Jan 18, 2010 8:10 pm Post subject: |
|
|
those speakers need to be in like a n enclosure for the frequency u want,
and is the 2 channel running all that? |
|
| Back to top |
|
 |
infinite_RPM Sweet on this forum
Joined: 17 Mar 2008 Tech posts: 330
My 2NRide:
|
Posted: Mon Jan 18, 2010 8:15 pm Post subject: |
|
|
| 2 channel running the 2 8's at 4ohm stereo...the 2 6" in front runs off the deck |
|
| Back to top |
|
 |
noyztoyz 3NE 2NR Power Seller
Joined: 21 Jun 2007 Tech posts: 618 Location: all over My 2NRide:
|
Posted: Mon Jan 18, 2010 8:33 pm Post subject: |
|
|
what enclosure is the 8s in?
and those 6s aint seeing enough power |
|
| Back to top |
|
 |
infinite_RPM Sweet on this forum
Joined: 17 Mar 2008 Tech posts: 330
My 2NRide:
|
Posted: Tue Jan 19, 2010 10:41 am Post subject: |
|
|
| ok how bout dis... i buy 2 more 8" soundstreams and run all 4 in an enclosure tuned to 75Hz i will go a little over budget doh |
|
| Back to top |
|
 |
SmokeyGTi I LUV THIS PLACE
Joined: 22 May 2006 Tech posts: 972 Location: Trinidad My 2NRide:
|
Posted: Tue Jan 19, 2010 2:16 pm Post subject: |
|
|
^^ that'll work fine. ell, even alpha's give good midbass in the proper enclosure.
i'm guessing the 8's were on the back dash. |
|
| Back to top |
|
 |
silent_riot TriniTuner WHOoRE
Joined: 26 Dec 2004 Tech posts: 1445 Location: Digitized My 2NRide:
|
Posted: Tue Jan 19, 2010 7:42 pm Post subject: |
|
|
| The 8s ported right now? |
|
| Back to top |
|
 |
infinite_RPM Sweet on this forum
Joined: 17 Mar 2008 Tech posts: 330
My 2NRide:
|
Posted: Tue Jan 19, 2010 11:32 pm Post subject: |
|
|
| nope just crossed at 80hz |
|
| Back to top |
|
 |
nello-sello 3NE 2NR for life
Joined: 19 Dec 2007 Tech posts: 158 Location: whispering in Jack Warner's ear... My 2NRide:
|
Posted: Wed Feb 03, 2010 7:10 pm Post subject: |
|
|
| update??? |
|
| Back to top |
|
 |
3stagevtec punchin NOS
Joined: 12 Jul 2006 Tech posts: 4809 Location: killing two stones with one bird... My 2NRide: Suzuki Grand Vitara
|
Posted: Wed Feb 03, 2010 10:17 pm Post subject: |
|
|
| infinite_RPM wrote: | i set the low pass and subsonic for the bass 30-80Hz and the mids crossed at 80hz...it not designed to play that low so it will start to distort when i turn it up... so i tuned it higher...my mids match the bass now but from 60-120 is kinda non existant...
btw my setup is 2 6"dls in front
2 8" soundstreams in the back
1 mtx 12" tr75 (in horn loaded enclosure)
PB asa1000.1dx
ss xta 480.2
i was checking out some audiopipes to buy |
odd setup you have there imo.. i.e. with the fullrange DLS off the deck power and just a pair of powered midrange 8"s in the back..
and the DLS will only be receiving about 14Wrms / CH from your typical Pioneer deck.. (from my experience, a properly powered and crossed pair of components can get really loud)
__________________________________________
if you add more 8" drivers, you midrange / midbass will get pretty loud and you will start to fall behind in the high frequency range.. i.e. the DLS off deck power will not keep up..
__________________________________________
i see you want both SQ and gallery.. so why not develop each system properly?
i.e. run the 8"s in a ported enclosure to get good response from 80Hz up, along with a pair of compression drivers to complete the gallery set frequency range..
then run the DLS components for SQ / daily use only.. |
|
| Back to top |
|
 |
infinite_RPM Sweet on this forum
Joined: 17 Mar 2008 Tech posts: 330
My 2NRide:
|
Posted: Thu Feb 04, 2010 11:03 am Post subject: |
|
|
| thats d kinda advice i was looking for^^ |
|
| Back to top |
|
 |
3stagevtec punchin NOS
Joined: 12 Jul 2006 Tech posts: 4809 Location: killing two stones with one bird... My 2NRide: Suzuki Grand Vitara
|
Posted: Thu Feb 04, 2010 11:54 am Post subject: |
|
|
 |
|
| Back to top |
|
 |
|
|
|