FS: Megan Racing + Regular Strut Bars & Chassis Braces

aaron23 · Joined: 30 Jun 2009 Tech posts: 0 My 2NRide:

have any struts bars for the es5 civic 2001-2003 model?

TSC · Posted: Fri Sep 25, 2009 9:45 pm Post subject:

aaron23, I have for the 01-05 Civic
Megan Racing FL H-Brace $650,
Megan Racing RL tie brace $400.
RU in regular unbranded style for $330.

I got the incorrect length bar for the FU. The brackets are correct though. If you come by I'll check if I have another bar that will work with the brackets for the FU.

Megan Racing lowering springs = $1750
Megan Racing rear camber kit = $1050
fog lamps with harness and switch = $700

All in stock now.

MJb12 · Posted: Thu Oct 01, 2009 7:25 pm Post subject:

b12 struts, made a comment bout d springs as well.....link up !!

ASAP

genghis · Posted: Thu Oct 01, 2009 10:25 pm Post subject:

i asked you about the CS3 lancer RL bar a while ago.

and you were not sure if it would fit. did anyone save me ah drive down rio yet?

TSC · Posted: Thu Oct 01, 2009 10:35 pm Post subject:

MJb12, I saw it and replied.

genghis, customers took it and said they'll make the adjustment if required. No one came with a car for me to fit it myself.

super_cadet · Posted: Fri Oct 02, 2009 9:10 am Post subject:

What material is the regluar bars made of?

driftkid · Posted: Fri Oct 02, 2009 11:23 am Post subject:

rear camber kit for A31 cefiro

MJb12 · Posted: Fri Oct 02, 2009 7:59 pm Post subject:

give me an exact location, i headin down Rio on monday, i cud pass in and check u guys out !!!

B12 Springs & Struts.....price needed !!!

TSC · Posted: Sat Oct 03, 2009 12:43 am Post subject:

super_cadet, it's made with aluminum.

driftkid, S13, A31, Altima, Cifero, C33 Medalist
Rear Upper Control Arm/ Camber kit $1850

Click for full-size.

MJb12, I'm in Poole Village, Rio Claro. That's before Rio Claro if you're coming from San Fernando and after Rio Claro (~5 mins) if you're coming from Mayaro. Call me at the #s below and I'll give you better directions.
B12 lowering springs by Megan Racing = $1750, B12 FU strut bar = $330 for regular and $475 for Megan Racing, B12 FL = $495.

TSC · Posted: Thu Oct 15, 2009 8:20 am Post subject:

RWD (Box) Lancer FU strut bars available in regular style = $400

vtecr86 · Posted: Fri Oct 30, 2009 8:35 pm Post subject:

What your have for Y2K Accent?

TSC · Posted: Sat Oct 31, 2009 9:07 am Post subject:

vtecr86, I might have a FU strut bar. You'll have to bring the car to confirm that it will fit.

dyne · Posted: Wed Nov 04, 2009 2:59 pm Post subject:

u have anything for the 2nd gen rx7

TSC · Posted: Thu Nov 05, 2009 5:46 am Post subject:

dyne, I usually have FU and RU, but don't have in stock at this time. Regular unbranded bars $330 each, Megan Racing bars $475 each.

Mendoza · Posted: Thu Nov 26, 2009 3:24 am Post subject:

interested in a pair for a libero
meaning the megan set
front and rear
how soon can i get it

TSC · Posted: Thu Nov 26, 2009 5:28 am Post subject:

Mendoza, Regular front and rear in stock for libero. No megan for that car unless special ordered and they will be $500 each because they don't do megan bars for that car.

Mendoza · Posted: Thu Nov 26, 2009 9:00 am Post subject:

ok then how much for the stock front and rear

TSC · Posted: Thu Nov 26, 2009 7:53 pm Post subject:

Mendoza, $330 each for FU and RU.
FL H-brace 4-pt for manual = $525. FL 2-pt $475
RL for libero with independent suspension at rear $300
You can get as early as tomorrow. Call tonight before 9pm if you can to arrange.

smily245 · Posted: Fri Nov 27, 2009 3:57 pm Post subject:

wat is the price for the front lower strut bars for the almera? and do you have in stock? could you send me a pic of it?

TSC · Posted: Sat Nov 28, 2009 11:04 am Post subject:

FL = $495 in stock.

http://forums.trinituner.co...2d78e1e2443aa484539400e86

Click for full-size.

Animal Pak · Ricer Joined: 13 Sep 2009 Tech posts: 24 My 2NRide:

Looking for everything for a ck4 mivec...

total cost?

TSC · Posted: Thu Dec 10, 2009 8:33 am Post subject:

Animal Pak, Sorry for the late reply on this.
CK2-4
FU and RU strut bar regular style $330
FL 2-pt tie bar $475
FL 4-pt H-brace for manual models $525
RL tie bar regular style $300
Megan Racing lowering springs $1700
Megan Racing rear camber kit $1100
Sleeve coilovers $1000 - $1500
Short ram intake with cone filter $400
Extractor with downpipe and flexjoint for 4G92-4 $1400
Cross drilled rotors Front $1000/pr Rear $900/pr
1-pc headlights with dual halo (angel eyes) CK4 $1950
Headlights for CK2 (no corners) black with dual halo (angel eyes) $1300
Chrome/red tailights $625/pr
Black tail lights $975/pr
Clear side markers (fender lights) $140/pr

Civic 2nr · Posted: Thu Dec 10, 2009 2:56 pm Post subject:

anything 4 the legacy yet?

TSC · Posted: Sat Dec 12, 2009 11:00 am Post subject:

Civic 2nr, got strut tower bars but sold out a long time ago. Haven't brought in anymore since. If I do it will definitely be in January and not this month.

yadel · Posted: Sun Dec 13, 2009 10:03 pm Post subject:

looking for everything for an ae110
gimme prices please

TSC · Posted: Mon Dec 14, 2009 4:58 pm Post subject:

yadel, only FU strut bar for $330.
Lowering springs would be here early next month.

EVA Unit-01 · Posted: Mon Dec 14, 2009 9:17 pm Post subject:

wuh bout a 20007 CS3 from the firm???

anything that wouldn't void mih warranty???

TSC · Posted: Wed Dec 16, 2009 7:59 am Post subject:

EVA Unit-01, I figure you meant 2007 CS3. I have the
FU strut bar $330
RU strut bar $330
FL tie bar $495
RL tie bar $300
Lowering springs $1750
Headlights (black with projector and halo) $2300/pair
Tailights (black) $1100/pr

EVA Unit-01 · Posted: Wed Dec 16, 2009 9:38 am Post subject:

TSC, wat brand are the strut bars and tie bars? are they Megan Racing?

if not, what brand are they? can you give me part numbers?

i need to check the installation methods with my mech, to ensure it doesn't void my DM warranty... Confused

thanks in advance!

TSC · Posted: Wed Dec 16, 2009 11:11 am Post subject:

EVA Unit-01, the FU, RU and RL are regular unbranded. No logos. Megan doesn't have bars for the CS3. If I order megan bars to fit the CS3 brackets they would cost $525 each for the FU and RU.