ADAH 303
3NE 2NR Power Seller
Joined: 29 Apr 2003
Tech posts: 472
Location: As of June 1st 2008, we NO LONGER RETAIL.We will strictly be involved in Marketing & Wholesaling
My 2NRide: Acura Integra
|
 Posted: Tue Jul 10, 2007 8:42 pm
Post subject: FS: Energy Suspension Bushing Kits for Honda |
 |
|
http://www.energysuspension.com/
 
Energy Suspension Performance Front End Control Arm Bushings Sets
Honda Civic 1992-1995 EXi, LXi
Honda Civic 1996-2000 EXi, LXi
Honda Civic 1996-2000 SiR
Honda Civic 2001-2005 EXi
On the front of vehicles–they make a dramatic improvement in the way they handle, with quicker steering response and greater vehicle control. Whatever your demands, proper alignment (caster and camber) is better maintained by the use of the correct performance durometer of the bushing's material formulation.
On the rear, these control arm bushings are a must for controlling wheel hop and increasing cornering control for competition uses as well as maintaining alignment on and off-road.
All of Energy's control arm bushings are full-floating and non-binding... especially important when ride height is altered or greater suspension load is required. Most are pre-lubricated. This is especially important for both lowered and raised vehicles that have had drastic suspension geometry modifications. Energy's HYPER-FLEX™ performance polyurethane control arm bushings do not rot or deteriorate from oils or atmospheric conditions such as ozone, smog, road salt, chemicals, and other corrosives. They will not deteriorate in a few short years and cause that mushy, uncertain steering response- like rubber O.E.M. ones often do. Most sets come with zinc plated outer metal shells.
• For both front and rear of suspensions on cars, trucks and SUVs.
• Maintains proper alignment under extreme conditions on and off -road and during competition.
• Improves vehicle handling, cornering and overall control.
• Full floating, for smoother operation.
• Made of Energy's HYPER-FLEX™ performance polyurethane to add performance and durability
Energy Suspension Performance Polyurethane Rear Trailing Arm Bushing Set
Honda Civic 1988-2000 (Must reuse all metal parts)
With the increased use of higher traction and performance tires on today's front wheel drive vehicles soft original factory rubber bushings can often allow the suspension to require upgraded bushings.
Energy's re-engineered performance polyurethane rear trailing arm bushings help the vehicle maintain proper rear alignment toe and caster settings under all high performance driving conditions. Great to use on the street or race track!
And, Energy's exclusive formula HYPER-FLEX™ polyurethane material assures long-lasting performance, unlike many O.E.M. rubber components.
• For popular front wheel drive sport compacts.
• Maintains proper alignment better than O.E.M. bushings under extreme conditions.
• Replaces that original, short lived and too-soft O.E.M. rubber.
• Complements the use of performance tires, on the street or track!
..
Energy Suspension HYPER-FLEX SYSTEM Complete Master Bushing Set
Honda Civic 1992-1995 EXi, LXi
Honda Civic 1996-2000 EXi, LXi
Honda Civic 1996-2000 SiR
Not Actual Picture
HYPER-FLEX™ is Energy Suspension's unique and technically advanced chemical formulation performance polyurethane. HYPER-FLEX™ has been used on Energy's products that have been awarded 9 U.S. Patents.
Durability is superior to most rubber components that are used for cars, trucks and SUVs. Road salt, oil, and a host of other common under car contaminants will eventually destroy the rubber bushings on your vehicles, not to mention the weight and torque forces that typically compress most rubber permanently!
HYPER-FLEX™ replacement polyurethane components stand up well to contaminants that often destroy rubber and have been engineered to give longer-lasting performance and not compress permanently.
HYPER-FLEX™ is offered in a variety of durometers (firmness or softness), depending on the a particular product application. Performance tested and race proven, it's used for all of our products that require a higher level of performance and durability!
We call it "The Cure!"
If you are modifying, building a new vehicle for scratch or restoring an old one, Energy Suspension's HYPER-FLEX™ performance polyurethane should be the "ground zero" focus of your present and next vehicle plans.
Includes: Front and rear control arm bushings, front and rear shock bushings, front end links, steering rack bushings, transmission shifter stabilizer bushings (manual transmission only), ball joint boots and tie rod end boots.
Energy Suspension Manual Transmission Shifter Stabilizer Bushings
Honda Civic 1996-2000 SiR ONLY
By using performance bushings, you'll take the slop out of your shifting mechanism and you'll be able to make faster, more consistent shifts. These new shift stabilizer systems are made of long lasting, firmer polyurethane. These bushings handle the stresses put on the vehicle for high performance driving, as well as all out racing.
Energy Suspension Performance Polyurethane Motor Mount Inserts
Honda Civic 1996-2000 SiR *Three (3) torque positions supplied*
They both restore worn mounts and reduce unwanted motor assembly movement. Under high performance conditions, they reduce wheel hop and torque induced movement that can actually damage vehicle components! These polyurethane inserts are thoroughly tested to add support and stability to the existing O.E.M. motor mount system.
Typically, they are mounted in the "torque position" location of the vehicle motor and transmission mount system. The two piece supporting insert set is designed to be used in conjunction with the original stock motor mount. The benefit of this design is additional strength and toughness, thanks to the polyurethane support. This solution is easy to install and just as easy to remove and return the mount to stock configuration, if so desired.
Energy's specially formulated HYPER-FLEX™ performance polyurethane material is used to assure long-lasting performance, unlike many O.E.M. rubber motor mount.
*Only torque positions supplied.*
• Available for many popular sporty and performance front wheel drive vehicles.
• A real must to use for sport compact competition and performance uses.
• Helps reduce wheel hop and traction loss.
• Prevents damage to other vehicle components.
• Improves and even restores broken motor mounts.
• Made of HYPER-FLEX™ performance polyurethane.
• Resistant to under vehicle fluids: oils, coolants, road contaminants, etc.
Energy Suspension Performance Polyurethane Front Shock Upper & Lower Bushing Set Honda
Honda Civic 1992-1995 EG Chassis
Honda Civic 1996-2000 SiR ONLY
They give any vehicle's suspension instant response and control using increased durometer (firmness) material settings.
Energy's HYPER-FLEX™ performance polyurethane shock bushings and grommets last forever and add to the dampening performance of the shock unit. Give any shock absorber maximum efficiency while extending its life!
Many styles to choose from. Catalog listings show I.D. and O. D. dimensions as well as shape–for easily selecting the proper fit.
• Adds performance to any shock!
• Benefit from better durability over O.E.M. rubber buhsings.
• Important to use for competition of any kind.
• Great for show vehicles–adds that finishing touch!
• Made of Energy's HYPER-FLEX™ performance polyurethane.
http://www.energysuspension.com/pages/hon1.html
http://www.energysuspension.com/pages/hon2.html
POSTED QUESTIONS may NOT be Answered.
 |
|
2NRides
FAQ
Search
Memberlist
Usergroups
Register
Profile
Private Messages
Log in
