evo dirfting?

Death-Row · Posted: Wed May 14, 2008 12:08 pm Post subject: evo dirfting?

i did a search and found nothing so i said ill make a post. i wanted to know if an evo can be a drift car? what does it take? can you still keep the AWD?

i asked this since i know the skyline r32 can easily be a rwd car by removing the fuse or installing the switch thingy Laughing

i know the awd systems may not be the same but wanted to know if maybe something can be installed to the evo that can adjust the amount of power that goes to the rear and the front? maybe send 90% to the rear and 10% to the front? there by still keeping the awd parts moving but still most power goes to the rear.

would like to hear your views on this. thanks. Very Happy

Tsuchiya · Posted: Wed May 14, 2008 11:48 pm Post subject:

As stated in a past post about evo conversions, the drivetrain is significantly different from an impreza or a skyline. I'm not sure how the evo works its AWD system but it Rhys Millen motorsports are actually making a kit where basically the output shafts to the front wheels are empty, thereby making the evo RWD. And you can swap back the originals when u've fedup driving like a 5 year old.
http://www.edmunds.com/insideline/do/Features/articleId=115637
The D1 evo by cusco, actually uses a longitudinal engine layout and a custom Getrag g'box and is strictly RWD.

Death-Row · Posted: Thu May 15, 2008 12:41 am Post subject:

Tsuchiya,was reading about that kit but also read that it is hell on the transfer case.

Tsuchiya · Posted: Thu May 15, 2008 5:48 pm Post subject:

really?? well i suppose y wud u want an evo, which is so quick as an AWD car, as a RWD? jus to showoff really...
buy an ole GSR lancer if u want a mitsu drifter

Death-Row · Posted: Fri May 16, 2008 11:25 am Post subject:

Tsuchiya,just wanted to know. i wanted to know if there was any quick way to change from rwd to awd with the evo. so you just switch to rwd when u wanna do ur lil drifting and then back to awd for the rest. since they were also saying that due to the desing of the vehicle, it would suck as a RWD for cornering and stability etc. Laughing

Tsuchiya · Posted: Fri May 16, 2008 12:25 pm Post subject:

i guess so...but its too much work. Plus i guess its like de-evolutionizing the evo Laughing

Death-Row · Posted: Fri May 16, 2008 5:22 pm Post subject:

Tsuchiya,

yup.

Tsuchiya · Posted: Sat May 17, 2008 9:23 pm Post subject:

imo, jus get an ole rwd beater and keep the evo for more grip running. drifting gets expensive cuz ur gonna hit pavement, guardrail, other driftcars...tyre gonna delaminate and take ur bumper off Laughing

, etc, etc.

turbohead · Posted: Sat May 17, 2008 10:53 pm Post subject:

this is wat they did in tokyo drift, dey call it a condemin kit i tink....they use a acd controller 2 adjust the power distribution.. i cud be wrong

Tsuchiya · Posted: Sun May 18, 2008 2:18 am Post subject:

yeh u r wrong Laughing

...they used ryhs' fwd condemn kit

Death-Row · Posted: Sun May 18, 2008 4:07 pm Post subject:

Tsuchiya,

is a charmant a good drift car? ive seen one for sale but its really in bad shape, no interior, no engine, missin a fender and a few rotten spots. i think if i give the guy something like a 1K for it, he might sell Laughing

that could be a lil self project, build it myself.

what you think?

Tsuchiya · Posted: Thu May 22, 2008 4:42 am Post subject:

actually....charmants use the same suspension, engine and drivetrain as the infamous ae86 corolla. Well not the same but the 3A engine is the same family as the 4a that comes in the SR5 corolla. Thing is the body panels are a little hard to get thses days....but yeh its an excellent drift project

Death-Row · Posted: Thu May 22, 2008 9:28 am Post subject:

Tsuchiya,yup, been hearing body parts are kinda hard to come by Mr. Green

was thinkin about making them? whats the best material to make body panels out of? also, how hard will it be to source those parts from the toyota family? or would it be better (parts availability that is) to go simple RB20, skyline diff with some aftermarket suspension etc?

turbohead · Posted: Thu May 22, 2008 11:18 am Post subject:

rb might dip the car if not installed properly, try sr an yuh will have a mad power/weight ratio..

Death-Row · Posted: Thu May 22, 2008 4:27 pm Post subject:

turbohead,dont like the SR series boy Laughing

i know rb might mess with the weight to the front but as you said, if installed correctly, it can be done to a alright standard.

turbohead · Posted: Thu May 22, 2008 5:12 pm Post subject:

yeh jus make sure an strengthen around the firewall where you cut to fit it in....yuh dont want wen yuh hit some yuh watchin yuh exhaust pipe....

Death-Row · Posted: Thu May 22, 2008 5:22 pm Post subject:

turbohead, Laughing

Death-Row · Posted: Thu May 22, 2008 5:23 pm Post subject:

can you get body parts made to the original specs? as in material etc?

turbohead · Posted: Thu May 22, 2008 5:30 pm Post subject:

c/f ftmfw, den yuh wont need rb jus sr an yuh power/weight will be crazy maddd

Death-Row · Posted: Thu May 22, 2008 5:33 pm Post subject:

turbohead, Laughing

you would have to custom make the c/f since i dont think charmants got c/f parts in production Laughing

also, i think it was discussed here that custom make stuff aint that strong compared to others or something so. see a man hit yuh and de car crumple like paper. Laughing