DIY Polyurethane mounts!!!

redsupra101 · Posted: Wed Oct 24, 2007 11:41 pm Post subject:

followed this thread and did this on my car. excellent stuff!
one tube was enough for 4 mounts. 2 are small ones and 2 are big ones.
did all the mounts except the big funny looking pass. side top mount.

1997 honda civic

NOS4R2 · Posted: Fri Nov 23, 2007 4:49 pm Post subject:

Blazin good advice Razz

Thank you very much i give 5 outta 5 Idea

bluespeed · Posted: Sun Mar 16, 2008 2:25 am Post subject:

any feedback?....ppl who did this....are the mounts still going strong?

What polyurethane brand to use?.....(Exact name, price, where to get it)

any other advise....

Rahtid · Posted: Fri Apr 04, 2008 9:21 am Post subject:

can u do dis for d rear bushin in a civic?d one infront d back wheel under d door,,cant remember d real name?n any other bushing?

X_Factor · Posted: Fri Apr 18, 2008 8:11 pm Post subject:

^^ i saw someone here selling energy suspension bushing kits for the civic
that would work alot better

THE SYNDICATE · Posted: Thu May 01, 2008 7:52 am Post subject:

Did my mounts recently.........front and back! NO PROBLEMS!

Will do the tranny one soon.

Works dam good...........vibration minimum.(u might not even feel a difference)

*B12 equipped with SR20DE HIGHPORT*

Neutral

Will post brand,price,location etc. later! Neutral

crocsrule · Posted: Thu May 15, 2008 5:47 am Post subject:

nice work

MJ · Posted: Sat Aug 09, 2008 3:32 pm Post subject:

so which will be better this or an energy suspension bushing kit?
performance wise and durability

bluespeed · Posted: Sun Aug 10, 2008 11:33 pm Post subject:

THE SYNDICATE · Posted: Mon Aug 11, 2008 7:09 am Post subject:

^^^will finish my post some time this week bro.............will let u know!

Neutral

dbesson · Posted: Tue Aug 19, 2008 7:19 pm Post subject:

THE SYNDICATE · Posted: Wed Aug 20, 2008 7:17 am Post subject:

sentraman · Posted: Thu Sep 04, 2008 2:08 pm Post subject:

well I did not feel like doing mine myself (cause who ah go blame if it aint come out good lol) so I just dropped off my back mount to do. Soon as I get it back I will post pics then once installed will report on vibration etc etc..

slow323 · Posted: Tue Oct 21, 2008 12:32 pm Post subject:

anyone did this for the almera rear piviot bushing would like to knw if its for windshields you can check bobbys in the bamboo saw guys buying it there b4 they went to change their windshields

red bwoy · Posted: Wed Nov 12, 2008 7:31 am Post subject:

did this on my bj front and rear mounts over a year now no problems and it still good recently did cradle bushings jury still out dey

sidewayz69 · Posted: Fri Nov 14, 2008 6:11 pm Post subject:

[/quote]
it takes alot of r&d to make a mount from a mold and ensuring that the distance from the centre shaft to the external perimeter is maintained according to spec

ok but the engine mount have a certain degree of accuracy so 3mm (dont think it would be so much) off in any direction should not cause any promblems
or and the engine mount brackets will have some clearance in the bolt hole positions

phreakazoid · Posted: Wed Dec 03, 2008 2:16 am Post subject:

Bought this thing recently and did some mounts....The name is 3M urethane ..cost $65 dollars.. ..It's extremely messy and hard to remove from your hands so please wear gloves.The mounts came out really good and working perfect!

cressida_override · Posted: Thu Dec 18, 2008 1:01 am Post subject:

^^^ where did u purchase the 3M urethane?

phreakazoid · Posted: Thu Dec 18, 2008 1:46 am Post subject:

Got it at a parts place down on my end...Barrackpore.....If that's anywhere close to you I can give you directions.... let me know

ripit · Street 2NR Joined: 23 Apr 2007 Tech posts: 37 My 2NRide: