| View previous topic :: View next topic |
| Author
|
Message |
lejane Riding on 13's
Joined: 28 Apr 2008 Tech posts: 3
My 2NRide:
|
Posted: Mon Jun 16, 2008 3:58 pm Post subject: Dash Lights Not Flashing |
|
|
I recently installed a pioneer deck in my wingroad Y10 model and only realised that the dash lights weren't flashing when i engaged my viper alarm. The alarm works fine but lights aint flashing. Need some serious help. Bless  |
|
| Back to top |
|
 |
|
|
 |
BreadHead Street 2NR
Joined: 10 Jan 2008 Tech posts: 37 Location: South My 2NRide:
|
Posted: Mon Jun 16, 2008 8:38 pm Post subject: |
|
|
| Could be a fuse or a bulb probably blow somewhere |
|
| Back to top |
|
 |
THE SYNDICATE 3NE2NR is my LIFE
Joined: 13 Feb 2007 Tech posts: 735 Location: Drowning My Sorrows With a Cold HEINEKEN.... My 2NRide: Nissan B12 Sentra
|
Posted: Tue Jun 17, 2008 7:01 am Post subject: |
|
|
| Are u gettin park lights? |
|
| Back to top |
|
 |
lejane Riding on 13's
Joined: 28 Apr 2008 Tech posts: 3
My 2NRide:
|
Posted: Tue Jun 17, 2008 8:17 am Post subject: |
|
|
| I checked all the fuse and the park lights work |
|
| Back to top |
|
 |
flatline 3NE 2NR Spannerator
Joined: 01 May 2004 Tech posts: 2500 Location: cd /pub | more beer My 2NRide: Nissan S14
|
Posted: Tue Jun 17, 2008 9:01 am Post subject: |
|
|
| the dash lights work at all? or you only get the non-function when you activate the alarm? Perhaps you should recheck the deck wiring to make sure you didn't forget to include some wires, or in case you crossed the wrong wires |
|
| Back to top |
|
 |
lejane Riding on 13's
Joined: 28 Apr 2008 Tech posts: 3
My 2NRide:
|
Posted: Tue Jun 17, 2008 10:20 am Post subject: |
|
|
| i only get the non function when i activate an deactivate the alarm. I rewired the deck three times. There is one wire which isn't connected, casue it is the dash wire - meaning: The old deck had a function when you put on the park lights the lights on the deck would come on. The pioneer doesn't have that function. I even tried hookin up that wire to the deck and each time put on the park lights it shorted out the deck. |
|
| Back to top |
|
 |
brian_h Ricer
Joined: 03 Jul 2008 Tech posts: 17
My 2NRide:
|
Posted: Wed Jul 09, 2008 10:56 pm Post subject: |
|
|
| check every time you use your deck and see if time and setting resets if so swap constant B+ with acc wire |
|
| Back to top |
|
 |
THE SYNDICATE 3NE2NR is my LIFE
Joined: 13 Feb 2007 Tech posts: 735 Location: Drowning My Sorrows With a Cold HEINEKEN.... My 2NRide: Nissan B12 Sentra
|
Posted: Thu Jul 10, 2008 6:51 am Post subject: |
|
|
| lejane wrote: | | i only get the non function when i activate an deactivate the alarm. I rewired the deck three times. There is one wire which isn't connected, casue it is the dash wire - meaning: The old deck had a function when you put on the park lights the lights on the deck would come on. The pioneer doesn't have that function. I even tried hookin up that wire to the deck and each time put on the park lights it shorted out the deck. |
If it's shortin out the deck jus leave it out!
It seems like that causin u some stress bro.........better u go by ur alarm shop and let them move the wire from the park and put it on the hazzard.
You won't have ur park light problem again and lights will still flash when u arm and disarm ur alarm!
My $0.02 |
|
| Back to top |
|
 |
equipped2ripp 3NE 2NR Power Seller
Joined: 17 Apr 2003 Tech posts: 2624 Location: San Fernando, Trinidad and Tobago My 2NRide: Ford Mustang
|
Posted: Thu Jul 10, 2008 3:14 pm Post subject: |
|
|
| check an electrician... next thing you make it worse. |
|
| Back to top |
|
 |
|
|
|