CY lancer (08 lancer)

neckto · Posted: Wed Nov 04, 2009 7:22 am Post subject:

SHO
thanks for the disc pads, will try to send the car by DM to have them changed this week

jadez · Posted: Wed Nov 04, 2009 10:07 am Post subject:

Shooter_boy_J · Posted: Wed Nov 04, 2009 11:12 am Post subject:

I have a set of the raliart back lights 2 sell looking for $3000 for it.

JUS4SHO · Posted: Thu Nov 05, 2009 5:59 am Post subject:

neckto · Posted: Fri Nov 06, 2009 1:35 pm Post subject:

fellas check this out

i find these looking real sweet and the price not bad either what you all think

http://www.x-factordesign.com/automirror

jadez · Posted: Fri Nov 06, 2009 7:44 pm Post subject:

^ I saw that a while back. one of my friends said its a pain in the ass in install.

its cool Rolling Eyes

But these seat covers win.

http://www.x-factordesign.com/exx1.5lancer

Mr. Green

nsmitsu · Posted: Sun Nov 08, 2009 4:46 pm Post subject:

Guys, check this out !!

http://www.metacafe.com/wat..._fq300_v_impreza_wrx_sti/

nsmitsu · Posted: Sun Nov 08, 2009 4:48 pm Post subject:

With respect to the wires that i alluded to previously by the floor of the driver side, what are implications if the wires got pulled (accidently)? Appreciate your help guys; I thinking about sticking them down with superglue??

neckto · Posted: Mon Nov 09, 2009 10:25 am Post subject:

jed
i drove the car this morning and it pulling off real lazy last time that it was happening said the tranny fluid needed changing cause when u mash you getting a stifling feeling before the car respond but i change tranny fluid last two weeks i do beleive it have something to do with the shitty INVEC 11 cause my last lancer was the same thing
anyone knoe how to stop/overcome/minimise this laziness effect?

Mitsu_Exec · Posted: Mon Nov 09, 2009 5:45 pm Post subject:

genghis · Posted: Tue Nov 10, 2009 8:44 pm Post subject:

wuz the bolt patern on the CY? 5 x 100 or 5 x 114?

jadez · Posted: Tue Nov 10, 2009 8:46 pm Post subject:

5x114

go through the previous pages of this thread to confirm.

neckto · Posted: Wed Nov 11, 2009 8:42 am Post subject:

well i agree that driving style and hiabit contribute but this problem goes past that
cause as the engine is cold it is progressivly worse
to the point that when u mash it sounding like it backfiring as well, anyways going to DM tomm to see whats up

jadez · Posted: Wed Nov 11, 2009 10:54 am Post subject:

that's the gear jumping.

I find on a cold statup the gears change smooth like I want it, until I step on the brake pedal a couple times... then that's it.

For INVECS II driving lessons, check JUS4SHO

Remember he recommended to "pretend your driving manual transmission and gently release the gas pedal/monitor your RPM to gauge when you feel the gear is going to change. That should help. Make the car drive how you want not how the car wants.

DM might just reset your ECU and it will drive fine until you step on the brake pedal again then it starts all over. Neutral

neckto · Posted: Wed Nov 11, 2009 11:44 am Post subject:

i'll take that with a pinch of salt

JUS4SHO · Posted: Wed Nov 11, 2009 7:21 pm Post subject:

btw allyuh remember to ask diamond to clean your trottle body and tps every service?
and belive me the only reason i did not buy the 2.0 lancer was it did not have the INVECS II trans... i dont belive its the trans... neckto make some time and come down by me
nsmitsu you as well pass down by me and i will take a look at them wires for you it must have a better solution that that permant glue fix

jadez · Posted: Wed Nov 11, 2009 8:02 pm Post subject:

^ SHO I hada clean mine to. I did not tell them to do it at my last service cuz the CSR tell me they have some "trainees" in there.

Saturday good? Fellaz?

neckto · Posted: Thu Nov 12, 2009 10:13 am Post subject:

yea SHO sounds like a plan, one of these wekends for sure
this sat not good for me

jadez · Posted: Thu Nov 12, 2009 1:20 pm Post subject:

Alright, Lets schedule this then. It would be nice for all of us to finally meet up

QG · Posted: Thu Nov 12, 2009 1:39 pm Post subject:

Click for full-size.

My cousin's 2009 Lancer is to the right. I too lazy to edit my padna mazda3 Laughing

I thought the rims were different to the lancer on the previous page...my bad.