| View previous topic :: View next topic |
| Author
|
Message |
neckto Chronic TriniTuner
Joined: 07 Jul 2003 Tech posts: 604 Location: Engine Room My 2NRide: Mitsubishi Lancer
|
Posted: Tue Jul 21, 2009 5:33 pm Post subject: |
|
|
well then DM should take care of this inhouse and free of charge not so?
also allyh have me rel lost with this aux port from the deck now
i have the 1.5L fully loaded!?
i not seeing any flip up cap in the back of my console!!!!!!!
it have a lil plastic cap in the back of it but high up nothing like inthe pics and it not comming out easy i beleive that is to get to the dash screw |
|
| Back to top |
|
 |
|
|
 |
trvs Sweet on this forum
Joined: 23 May 2008 Tech posts: 377
My 2NRide: Mitsubishi Lancer
|
Posted: Tue Jul 21, 2009 6:33 pm Post subject: |
|
|
Mitsu_Exec probably... the slack bolts. I wana have mine checked... Let us know what they say about the TSB. Also are you scratches vertical or horizontal ?
Or I noticed in my previous cy that the tint use to scratch. The new one I have now have a kinda Moleskin Window Tint Protection strip on the rubbers. But that does collect real dust and when the window goes down half way lets say, there is a nice line of dust on the outside
as for the "Ipod port". It has AUX written on the cover in the car.
Sho I wana get my K&N this week. You free this weekend? |
|
| Back to top |
|
 |
JUS4SHO 3NE 2NR Moderator
Joined: 22 Apr 2003 Tech posts: 9275 Location: N/A My 2NRide: LANCER
|
Posted: Tue Jul 21, 2009 9:14 pm Post subject: |
|
|
| i seeing what appears to be small crack on the rubber surrounding the sunroof and the top of the rubber on the front doors are becoming wrinkled |
|
| Back to top |
|
 |
trvs Sweet on this forum
Joined: 23 May 2008 Tech posts: 377
My 2NRide: Mitsubishi Lancer
|
Posted: Tue Jul 21, 2009 10:30 pm Post subject: |
|
|
^ oh no!
Does your sunroof make "noises" when driving through semi rough roads?
 |
|
| Back to top |
|
 |
JUS4SHO 3NE 2NR Moderator
Joined: 22 Apr 2003 Tech posts: 9275 Location: N/A My 2NRide: LANCER
|
Posted: Wed Jul 22, 2009 5:47 am Post subject: |
|
|
| never notice dat nah |
|
| Back to top |
|
 |
Mitsu_Exec Riding on 16's
Joined: 07 Sep 2003 Tech posts: 1151 Location: POS My 2NRide: Mitsubishi Lancer
|
Posted: Wed Jul 22, 2009 10:23 am Post subject: |
|
|
| jadez wrote: | Mitsu_Exec probably... the slack bolts. I wana have mine checked... Let us know what they say about the TSB. Also are you scratches vertical or horizontal ?
Or I noticed in my previous cy that the tint use to scratch. The new one I have now have a kinda Moleskin Window Tint Protection strip on the rubbers. But that does collect real dust and when the window goes down half way lets say, there is a nice line of dust on the outside
as for the "Ipod port". It has AUX written on the cover in the car.
Sho I wana get my K&N this week. You free this weekend? |
Scratches are vertical...
With regard to that moleskin window protection, the Diamond Motors Service Manager mentioned to me last year that that part was a fix to the continued problem of tint-rework being flagged by previous CY owners. I'd rather take the dust and will look into maybe getting them inserted.
with regards to the iPod port, as i've mentioned before, the Japan PCE/PCF CYs dont have a flip down port for the iPod. I've checked the area it supposed to be in as your picture suggests and there's a blanked off spot. I suspect you'd need to dremel it off in order to access the ports or trace the deck wires to locate. I dont see why it wont be within the wiring as there is an AUX function on our decks as well. |
|
| Back to top |
|
 |
trvs Sweet on this forum
Joined: 23 May 2008 Tech posts: 377
My 2NRide: Mitsubishi Lancer
|
Posted: Wed Jul 22, 2009 11:54 am Post subject: |
|
|
^ lol dang it.
There is also a "punch" settings
be we don't have the rockford systems
Let's meet for this weekend by sho!!! come on people we sticking. |
|
| Back to top |
|
 |
JUS4SHO 3NE 2NR Moderator
Joined: 22 Apr 2003 Tech posts: 9275 Location: N/A My 2NRide: LANCER
|
Posted: Wed Jul 22, 2009 4:47 pm Post subject: |
|
|
| this weekend bad for me saturday god daughter birthday party sunday i working 6-6 |
|
| Back to top |
|
 |
~*Ashes*~ Riding on 13's
Joined: 28 Jan 2009 Tech posts: 1
My 2NRide:
|
Posted: Wed Jul 22, 2009 7:02 pm Post subject: |
|
|
| Got into an accident with my lancer, and was surprised to see foreign used parts that I used to repair it....only thing now is the CD changer, the Cd's all fell on eachother and bent the laser eye, does anyone know how this can be replace for a reasonable price? |
|
| Back to top |
|
 |
trvs Sweet on this forum
Joined: 23 May 2008 Tech posts: 377
My 2NRide: Mitsubishi Lancer
|
Posted: Fri Jul 24, 2009 6:41 pm Post subject: |
|
|
^ what kind of lancer? can't be a new one ..
Sho and the other K&N fellas... I just finished installing my K&N drop in filter.
I noticed there is a small at the bottom half of the airbox when i close the two clips.. I noticed this with this original one as well... You all have this issue? Sho can we meet up somewhere so you can check it out quick quick...??
I bought this filter from W2J today [TEKNET] excellent service
http://www.knfilters.com/search/product.aspx?Prod=33-2392 |
|
| Back to top |
|
 |
JUS4SHO 3NE 2NR Moderator
Joined: 22 Apr 2003 Tech posts: 9275 Location: N/A My 2NRide: LANCER
|
Posted: Fri Jul 24, 2009 8:06 pm Post subject: |
|
|
you just did not fit it in properly that is all i home in the morning if you want to pass i live not far from price plaza
764-8314 |
|
| Back to top |
|
 |
trvs Sweet on this forum
Joined: 23 May 2008 Tech posts: 377
My 2NRide: Mitsubishi Lancer
|
Posted: Fri Jul 24, 2009 8:15 pm Post subject: |
|
|
| yea i'll pass in de morning. i added you to msn. |
|
| Back to top |
|
 |
trvs Sweet on this forum
Joined: 23 May 2008 Tech posts: 377
My 2NRide: Mitsubishi Lancer
|
Posted: Sat Jul 25, 2009 3:32 pm Post subject: |
|
|
SHO hooked me up nice this morning... kudos man!!  |
|
| Back to top |
|
 |
Morpheus23 Riding on 17's
Joined: 01 Mar 2004 Tech posts: 1285 Location: Earth My 2NRide: Mitsubishi Lancer
|
Posted: Sat Jul 25, 2009 3:34 pm Post subject: |
|
|
| ^^Cool. Good to hear |
|
| Back to top |
|
 |
nsmitsu Street 2NR
Joined: 11 Mar 2004 Tech posts: 75
My 2NRide: Mitsubishi Lancer
|
Posted: Sat Jul 25, 2009 5:07 pm Post subject: |
|
|
Hey guys, I having an issue with my front grille, both top and bottom halves. I've noticed that after highway driving at admittedly fast speeds that the grilles seem to shift off the retaining clips and getting them back into alignment is a real pain in the arse!! My better half suggested changing to ralliart grille. Any other suggestions?? Would really really appreciate it  |
|
| Back to top |
|
 |
trvs Sweet on this forum
Joined: 23 May 2008 Tech posts: 377
My 2NRide: Mitsubishi Lancer
|
Posted: Sat Jul 25, 2009 9:50 pm Post subject: |
|
|
^ wheys wtf..
have diamond check it out. |
|
| Back to top |
|
 |
JUS4SHO 3NE 2NR Moderator
Joined: 22 Apr 2003 Tech posts: 9275 Location: N/A My 2NRide: LANCER
|
Posted: Mon Jul 27, 2009 9:29 am Post subject: |
|
|
lawd pass by me i go tighten it up for you
best i quit my job and open a garage yes....lol
btw with the ralliart grille you WILL have to replace the entire bumper |
|
| Back to top |
|
 |
trvs Sweet on this forum
Joined: 23 May 2008 Tech posts: 377
My 2NRide: Mitsubishi Lancer
|
Posted: Mon Jul 27, 2009 9:44 am Post subject: |
|
|
lol then we will have to pay you lol
nsmitsu
Sho is right.
2008 Lancer Bumber: http://ow.ly/ihAz
Ralliart Bumber: http://ow.ly/ihAW |
|
| Back to top |
|
 |
nsmitsu Street 2NR
Joined: 11 Mar 2004 Tech posts: 75
My 2NRide: Mitsubishi Lancer
|
Posted: Mon Jul 27, 2009 9:44 pm Post subject: |
|
|
| Sho, i go PM you...i will bring some beers!! |
|
| Back to top |
|
 |
trvs Sweet on this forum
Joined: 23 May 2008 Tech posts: 377
My 2NRide: Mitsubishi Lancer
|
Posted: Mon Jul 27, 2009 9:53 pm Post subject: |
|
|
| when you going hit me a PM i'll try to get some leds for my park lights and number plate and try to install them with guidance from sho. lol |
|
| Back to top |
|
 |
a2mitsu Ricer
Joined: 06 Mar 2009 Tech posts: 29
My 2NRide:
|
Posted: Mon Jul 27, 2009 10:10 pm Post subject: |
|
|
| JUS4SHO wrote: | lawd pass by me i go tighten it up for you
best i quit my job and open a garage yes....lol
btw with the ralliart grille you WILL have to replace the entire bumper |
Oh craaaapppp! didnt think bout it like dat! (the grille)
Hmmmm, but wud be a nice bday present....wat u tink sam? let me know wat u decide. cud put in d order now....  |
|
| Back to top |
|
 |
trvs Sweet on this forum
Joined: 23 May 2008 Tech posts: 377
My 2NRide: Mitsubishi Lancer
|
|
| Back to top |
|
 |
nsmitsu Street 2NR
Joined: 11 Mar 2004 Tech posts: 75
My 2NRide: Mitsubishi Lancer
|
Posted: Tue Jul 28, 2009 5:19 pm Post subject: |
|
|
Well a2, i would love that as a b'day present tenk u tenk u!! Diamond says the cost of the Rockford is about 20000 to bring down and install...and that sucks! Even gettin the existing system upgrade is a problem, techs told me a few rides came in with blown systems from guys trying to upgrade on the fly..amps and such..
Ps a2, your baby will soon be whole again...and an even sweeter ride! |
|
| Back to top |
|
 |
trvs Sweet on this forum
Joined: 23 May 2008 Tech posts: 377
My 2NRide: Mitsubishi Lancer
|
Posted: Tue Jul 28, 2009 7:45 pm Post subject: |
|
|
$20000.00
wtf?
when you say on the fly? you mean upgrading the non OEM rockford ?
I saw japan parts has the front and rear ralliart bumpers for sale...
 |
|
| Back to top |
|
 |
a2mitsu Ricer
Joined: 06 Mar 2009 Tech posts: 29
My 2NRide:
|
Posted: Tue Jul 28, 2009 11:09 pm Post subject: |
|
|
| jadez wrote: | $20000.00
wtf?
when you say on the fly? you mean upgrading the non OEM rockford ?
I saw japan parts has the front and rear ralliart bumpers for sale...
 |
ohhh cooool! jadez do you know the cost of them of hand? dat wud b sweeeet!  |
|
| Back to top |
|
 |
trvs Sweet on this forum
Joined: 23 May 2008 Tech posts: 377
My 2NRide: Mitsubishi Lancer
|
Posted: Wed Jul 29, 2009 12:28 am Post subject: |
|
|
| abt 700USD each |
|
| Back to top |
|
 |
a2mitsu Ricer
Joined: 06 Mar 2009 Tech posts: 29
My 2NRide:
|
Posted: Fri Jul 31, 2009 6:38 pm Post subject: |
|
|
| 'Hoolllyyyy craep' as achmed wud say....alrite gotta rearrange some tings but can be done....Thanks jadez... |
|
| Back to top |
|
 |
ZeroOne Trinituner Peong
Joined: 05 Aug 2008 Tech posts: 498
My 2NRide: Mitsubishi Evolution X
|
Posted: Fri Jul 31, 2009 8:46 pm Post subject: |
|
|
| I saw a red cy lancer ex in st. james today, it had "evolution GT" painted on the trunk and some 17" inch stock rims that ive never seen before. What version of the cy is this? |
|
| Back to top |
|
 |
JUS4SHO 3NE 2NR Moderator
Joined: 22 Apr 2003 Tech posts: 9275 Location: N/A My 2NRide: LANCER
|
Posted: Fri Jul 31, 2009 10:11 pm Post subject: |
|
|
some lancer in SG have 17's
i know about the 1.5, 2.0 , GTS, Ralliart & the EVO MR , evo Gt sounds like rice |
|
| Back to top |
|
 |
nsmitsu Street 2NR
Joined: 11 Mar 2004 Tech posts: 75
My 2NRide: Mitsubishi Lancer
|
Posted: Sun Aug 02, 2009 10:36 pm Post subject: |
|
|
| Hey Jadez...they were trying to upgrade the indash 6 cd player...I want to put in an amp and maybe a 12" sub...not messing with the engine and such..warranty issues..only put in drop in KN filter.. Also guys, the discount is still available on online booking for service..Sho, I have another question dude, I noticed the post on the driver side by the windscree loose to the top? ever come across that? |
|
| Back to top |
|
 |
|
|
|