CY lancer (08 lancer)

jadez · Posted: Fri Apr 24, 2009 3:22 pm Post subject:

yea i was at a stand still by a traffic light when my dent occurred.

I also have another retarded question.

would 18" x 8.5" 5x114 rims fit well on the CY?

or 18" x 7.5" 5X100

these things new to me. Rolling Eyes

Mitsu_Exec · Posted: Fri Apr 24, 2009 4:04 pm Post subject:

the offset (100 vs 114) is the problem there. the stud bolt pattern needs to be identical. the width of the rims is subject to tolerances inside the fender wall area.

CY rims arent universal (carrying both 100/114 bolt patterns) so it wont work - unless (subject to confirmation), the CY GT rims are 114 pattern - then you'd need to swap out the hubs, front and rear.

jadez · Posted: Fri Apr 24, 2009 4:28 pm Post subject:

okay...make my life easy nah lol tell me what will work without modification..

I saw a couple CY with aftermarket rims. I don't want to be swapping out hubs.

I just need the bolt pattern and offset or whatever else...

SHO?

JUS4SHO · Posted: Sat Apr 25, 2009 6:08 pm Post subject:

ok here we go again Laughing

you can safely go from my research up to a 8.5" wheel

now if you have a cy2a you have 16" oem wheels these are 5x114.3 (114.3 is the pcd or pitch center diameter) offset is 46 mm and the wheel is 16x6.5
now the 18" wheel on the GT models are 5x114.3 offset is 46mm and the wheel is 18x7 the hub outer diamet is 67mm
if you are going with a wider rim like a 18x8 or 18x8.5 you must change the offset to about any where between 35mm to 40mm so that the inside of the wheel maintains a safe distance from the inside of he control arm and so that you dont change the geometry of the suspension to much

as for the paint check out the link below

http://www.japanparts.com/d...ll=&maker=&volkey=&page=1

jadez · Posted: Sat Apr 25, 2009 9:15 pm Post subject:

thanks for the response SHO.

so what you think about these?

http://www.rotawheels.com/wheels.asp?wheelid=30

I checked Garvin's Performance Shop for ENKEI for $9000.00 + Tires $5000.00 <-- Shocked

Also Checked Mileage Mack for some AXIS Hiro for $8500.00 + did not even bother to ask for tire price.

So i stepping down to rota's lol I saw a couple posts about someone who sells them here...Will call them on monday.

I looking at this design.

Specs: http://www.rotawheels.com/wheels.asp?wheelid=30

their specs seem to match your recommended specs.

Tell me what you guys think. car is white btw Rolling Eyes

Thanks for the link on japan parts.. btw

Mitsu_Exec · Posted: Sat Apr 25, 2009 9:22 pm Post subject:

JUS4SHO · Posted: Sun Apr 26, 2009 6:26 pm Post subject:

i dey waiting on all yuh
brian i hink we need to include the rest of the fellas who running the K & N on we little cleaning info what you think?
i tried it just a few short bursts while the engine off and WOW !!!!!!

but as usual u need a second person to apply the trottle so it will open up

ZeroOne · Posted: Sun Apr 26, 2009 8:57 pm Post subject:

One question. I see that this lancer is tough and its probably better than the new sedans by toyota, honda, nissan etc.

But which is better between this and the Mazda 3 and Mazda 6?

jadez · Posted: Mon Apr 27, 2009 9:53 am Post subject:

wrong forum padna... Razz

try asking here http://forums.trinituner.com/forums/viewforum.php?f=35

neckto · Posted: Mon Apr 27, 2009 4:13 pm Post subject:

hey im in the group buy for the sway bar once you all not hurry can can wait till july monthend if you all wanna wait let me know otherwise is no probs
also lets get some more info on the cleaning info for the foam
let us know what product it is and where it is available and what is the proceedure

another bumper story
last week the wifey misaverage the parking lot in gulf (twice) first time the front went in at it hard and hit the front left flare lip, so much that the bunper flew and pop on of the left front fender after i pop it back in (where is was glad to see no clips were broken) there was no damage beside the paint being scraped off

2nd time was reverse parking and there are certain spots in gulf car park that have some red metal things for in the grass behind the parking spots well she backed into it and also no damage escept craked/ chipped paint

Mitsu_Exec · Posted: Mon Apr 27, 2009 11:16 pm Post subject:

jadez · Posted: Tue Apr 28, 2009 12:41 am Post subject:

yea tonight I was washing my baby and I was like hey why we don't have a CY meet/Photo Shoot.

Cool

And we can even have a group site... similar to this

Click for full-size.

what you all think?

I believe the touch up paint is a mini brush not a spray

Mitsu_Exec · Posted: Tue Apr 28, 2009 3:00 pm Post subject:

jadez · Posted: Tue Apr 28, 2009 3:46 pm Post subject:

touch up paint would not fix his issues Laughing

neckto · Posted: Tue Apr 28, 2009 4:04 pm Post subject:

jed you wouldnt not beleive that is the same facking thing i telling she to do while we could still get a lil tradein value Shocked

you wouldnt beleive nah esp with the mileage daily and the bad roads
she hitting P Town to Brazil Arima every day pickup is the only sensible option

neckto · Posted: Tue Apr 28, 2009 4:09 pm Post subject:

jed you wouldnt not beleive that is the same facking thing i telling she to do while we could still get a lil tradein value Shocked

you wouldnt beleive nah esp with the mileage daily and the bad roads
she hitting P Town to Brazil Arima every day pickup is the only sensible option

jadez · Posted: Tue Apr 28, 2009 10:34 pm Post subject:

pshhhh...

I making 100-150KM a day Shocked

north to south runs.

Anyways what you all think about the Photo Shoot/Meet/Garage Day/Group Website.

Photoshop would fix the dings and dents no worries neckto

neckto · Posted: Wed Apr 29, 2009 10:28 am Post subject:

yea no scene im in
lol at photoshop i dont care bout the pic i living with it everyday

neckto · Posted: Wed Apr 29, 2009 10:34 am Post subject:

any update on the evo bumper, price, supplier, contact info etc?