CS Lancer!

teichou · Posted: Tue Mar 20, 2007 12:38 pm Post subject:

thanks
can those head lights and stuff fit on a cs3a ?

JUS4SHO · Posted: Wed Mar 21, 2007 9:36 am Post subject:

teichou · Posted: Wed Mar 21, 2007 11:58 am Post subject:

aye frass i see a manual shifter pannel on the site check it out
i know you was looking for one

fras · Posted: Wed Mar 21, 2007 2:40 pm Post subject:

Yeah I saw the wood grain pannel for around the shifter also fog lights

fras · Posted: Thu Mar 29, 2007 10:29 am Post subject:

Can some one confirm the rim spacing for me?
4*100 or 4*114 Question

venum · Posted: Fri Mar 30, 2007 11:57 am Post subject:

4x100

I saw at MARUD in Marabella the complete Carbon Fiber interior kit for the CS Lancer

just clip-on over your existing interior

had pieces for places that the original doesn't such as teh area by teh cup holder etc

$1495.00

looked real sweet

but I have wood grain finish though

teichou · Posted: Fri Mar 30, 2007 8:05 pm Post subject:

post some pics if you could nah

venum · Posted: Sat Mar 31, 2007 6:33 pm Post subject:

sorry dude

it was on sale at the parts place

i couldn't get any at that time

that will most likely be gone b4 i can go back to get

venum · Posted: Sun Apr 01, 2007 9:16 pm Post subject:

saw a lovely CS3 at the Mitsu meet today

chic driven, she was kind enough to let me look at it

full flair kit, 15" OZ rims, grey leather interior with CF finish, white dash

lovely, just lovely

illumin@ti · Posted: Mon Apr 02, 2007 1:11 am Post subject:

if memory serves right ,, i think they were 16's,, but then i couldnt macco too hard nah ,, mighta get a clout

joker06 · Posted: Mon Apr 02, 2007 1:17 am Post subject:

well
i wasnt relly maccoin but i sure is not 15s
either 16 or 17"

ziggi d verify for argument sake nah

venum · Posted: Mon Apr 02, 2007 10:14 pm Post subject:

most SDM Lancers that come with OZ's are 15"

my gf one came with 15"x7"

some really light rims

fras · Posted: Tue Apr 03, 2007 10:56 am Post subject:

I have 14" OZ Sad

I wanted the 15's Crying or Very sad

venum · Posted: Sun Apr 15, 2007 11:24 pm Post subject:

check here for upgraded oil cooler install:

http://forums.trinituner.co...0&postorder=asc&&start=40

#bump

for genghis

JUS4SHO · Posted: Mon Apr 16, 2007 6:10 am Post subject:

what is the power steering belt and timing belt oem part # for the cs3a?

and what is the oem timing belt # for the CEDIA CS2A?

i want to order these belts for my cars

venum · Posted: Mon Apr 16, 2007 7:37 pm Post subject:

I will have to check for the belt numbers on the CS3 for you

tommorow when there is daylight

my flashlight is out of batteries

venum · Posted: Tue Apr 17, 2007 12:04 am Post subject:

4G18

CRANKSHAFT-ALTERNATOR BELT
__________________________

OEM - 5PK865 R43-7 - MITSUBOSHI

I think a replacement is - 5PK880

CRANKSHAFT-A/C-POWERSTEERING BELT
_________________________________

OEM - 5PK1070 R43-7 - MITSUBOSHI

I can get teh CS2 numbers for you, but I will have to wait till I see my brother-in-law

JUS4SHO · Posted: Tue Apr 17, 2007 6:06 am Post subject:

i have all the belt #'s for the CS2A except the timing belt #

Venum for the CRANKSHAFT-A/C-POWERSTEERING BELT OEM - 5PK1070 R43-7 - MITSUBOSHI you dont have the Mitsubishi #? the (MR ######) number?

i also need the timing belt # for the 4G18 the mitsubishi # as i ordering the parts direct from Japan

venum · Posted: Tue Apr 17, 2007 5:21 pm Post subject:

nah boy SHO

thaz what I take from the belts that the car came with and still has on it

I can open up the timing belt cover and get the timing belt number for you, but that will be weekend though . . .

JUS4SHO · Posted: Wed Apr 18, 2007 5:54 am Post subject:

nice.... monday then

any body else with the origional a/c belt on they car that cud give meh the # ?

ronsin1 · Posted: Wed Apr 18, 2007 6:44 am Post subject:

will post the # of the CS2 later today when I get home can't remember them of hand just recently changed them

JUS4SHO · Posted: Wed Apr 18, 2007 10:21 am Post subject:

^^ u have the timing belt # as well ? i have both the a/c and alt belt #'s already for the CS2 all i need now is the timing belt #

ronsin1 · Posted: Thu Apr 19, 2007 7:06 am Post subject:

^^ went to the machanic last night but we did not have time to take out the cover for the timing belt to check the # he told me that they have the number in file so he should call me later today with it!

JUS4SHO · Posted: Thu Apr 19, 2007 7:14 am Post subject:

nice thanks

fras · Posted: Thu Apr 19, 2007 12:40 pm Post subject:

After yall could list the part numbers of the various belts

terryallen · Posted: Fri Apr 20, 2007 7:33 pm Post subject:

Hey guys thanks for the link to Bella, had to get a camshaft sensor and he had it when nowhere else in the country had it. Right now I am experiencing a slight rattle with my injectors after my sensor went bad, any ideas?

JUS4SHO · Posted: Mon Apr 23, 2007 10:39 am Post subject:

NO problem bella always has the part or can get the part for lancers !!!

i introduced 2nr's to him more than 4 years ago. so far he has never fail to supply.

any updates on the belts ?

fras · Posted: Tue May 01, 2007 4:30 pm Post subject:

Where has the mounts again Question

Engine And Tranny

venum · Posted: Fri May 04, 2007 12:55 pm Post subject:

Federal has all the mounts

Corolla man did a lil scouting around for me and reported that they had all teh mounts for both CK and CS

ronsin1 · Posted: Fri May 04, 2007 1:18 pm Post subject:

^^^ can confirm I had my mounts at federal!
(CS)