CS Lancer!

idlemind · Posted: Sat Feb 28, 2009 6:43 pm Post subject:

toothpaste works better than all

rainman · Posted: Sat Feb 28, 2009 8:50 pm Post subject:

with tartar control or without?
Laughing

venum · Posted: Wed Mar 04, 2009 8:47 am Post subject:

Update

got teh car sorted out

teh TB and idle control motor were serviced

idling normal now,

but motor on teh way out, mech bought me some time as it was now starting to act up

will be investigating options for landing a new one

second problem discovered - fan control unit need replacing

both fans spinning constantly

scan confirmed both issues

first order of business is to sort out the fans

wonder if I have to buy a complete fan assembly to get that

also, would a Cedia unit work Question

Idlemind - Homework for you:

Get me the part number for the fan controller as well as other parts on teh fan assembly for teh 4G93 GDI setup

Ronsin1 - Homework for you:

Get me the part number for the fan controller as well as other parts on teh fan assembly for teh 4G15 GDI setup

Assignment due by Friday 06 March 2009

Late submissions will be accepted only on very reasonale grounds

idlemind · Posted: Wed Mar 04, 2009 9:42 am Post subject:

wait...what?

how much time i have to say the fan setup is the same for the 4g18,4g15 and 4g93 once u carrying two fans.... Neutral

Sir, please refer ur lazy self thru the early pages of this thread

idlemind · Posted: Wed Mar 04, 2009 12:32 pm Post subject:

the part numbers for the two fans are at the bottom, so good luck finding that without scrapping.

the condenser fan is MR398247
and the controller is 1355a053
you and ronald could find the radiator fan #

ronsin1 · Posted: Wed Mar 04, 2009 5:15 pm Post subject:

buh I doh like homework

venum · Posted: Thu Mar 05, 2009 8:20 am Post subject:

venum · Posted: Mon Mar 09, 2009 12:00 pm Post subject:

got the fan relay

$800.00

can't see any part# on it

the guys at the parts place put their paint on it, so they may have covered it

now to install

idlemind · Posted: Mon Mar 09, 2009 12:17 pm Post subject:

"the guys at the parts place"

Tried looking up that in the yellow pages but didn find anything.
Do they go by another name? Maybe with an Ltd. at the end?

This is a part that is going to go bad whether we all like it or not as ALL were recalled in Lancers before July 2003. Cant find the link so take my word.

Il look into importing dem

venum · Posted: Mon Mar 09, 2009 4:11 pm Post subject:

^^^ can't remember teh name of teh place

it on the receipt

a place in Kelly Village Caroni

guy went by teh name 'Hog'

idlemind · Posted: Tue Mar 10, 2009 9:52 am Post subject:

lets hope he pulled the part from a working PigPen Very Happy

i spotted a 1355a053 controller on eBay and ordered it
you wouldnt believe the price boy, we really getting our heads hacked off in trini.

but as i see them il order them and keep for fellow tuners

venum · Posted: Sun Mar 15, 2009 8:28 pm Post subject:

fan relay was changed yesterday

car wukkin good

venum · Posted: Tue Mar 24, 2009 1:40 pm Post subject:

i saw a genuine Ralliart lancer in Mileage mack on saturday

manual too

5 lug wheels

had some scratches on teh body though

black

fras · Posted: Tue Mar 24, 2009 1:54 pm Post subject:

and no pics Twisted Evil

idlemind · Posted: Tue Mar 24, 2009 2:04 pm Post subject:

theres one that came Dex 1
everything cept he's automatic and no Ds

...well of course i ate him up Twisted Evil

ronsin1 · Posted: Tue Mar 24, 2009 3:45 pm Post subject:

^^ yuh only ate him up because he baby the car

ronsin1 · Posted: Tue Mar 24, 2009 4:41 pm Post subject:

Click for full-size.

Sweet

unfortunately all the rallytrinidad decals have been wiped of Sad

idlemind · Posted: Tue Mar 24, 2009 9:42 pm Post subject:

das the same fella??? the car actually look better

steupsss....i tell the man push the car last dex he say he pushin it.
i offered advice, he wasnt taking me on.

we'll see at Dex 2, maybe he needs to rent a helmet and a navigator too

P3UNG · Posted: Wed Mar 25, 2009 10:36 am Post subject:

guys check this...

pahdner had a spin out some mths back....spin about a 270 degrees n end in a ditch on the side of the road....since then he say his gears been goin in hard, jerkin and about a 5 second pause before the gear engages. i tell him well check the transmission...but that's jsut my logical layman suggestion...what allyuh think?

p.s. oh... is a cs lancer

idlemind · Posted: Wed Mar 25, 2009 10:40 am Post subject:

may not be related or it may.

do the usual, flush the tranny and replace the oil.
i did a 360 on the highway and the car was fine.

P3UNG · Posted: Wed Mar 25, 2009 11:04 am Post subject:

seen...well he spin straight into a ditch at the side of the highway...had to get towed cause the front was bumper deep in mud...

360 on the highway....whey! you playin knight rider...!! Shocked

idlemind · Posted: Wed Mar 25, 2009 11:13 am Post subject:

was some scary sheit

wet road, 120kmh, got bad drive, non-abs integra, applied for brakes and when i released, chaos ensued, went into a ditch as well but i was able to drive out.

he checked under the car for visible signs of damage?
tranny on the leftside eh

P3UNG · Posted: Wed Mar 25, 2009 11:49 am Post subject:

well as far as he say...it look ok, no visible signs...only thing is the plastic stone shield below need to replace or get clips.

well it was raining too when the car run off the road into the ditch... it was all mud so i guess that saved it from underbody damage...

idlemind · Posted: Wed Mar 25, 2009 12:08 pm Post subject:

Thing is the most DIY you can do with a tranny is change the fluid.
Anything other than that is to go inside.

I can give u a place named Jenton on Aranguez main road he can make an appointment. but anything to go inside a tranny is real paper.

P3UNG · Posted: Wed Mar 25, 2009 2:11 pm Post subject:

seen...well is worth a mention to him, prevention is better than cure..hehe! Laughing

venum · Posted: Wed Mar 25, 2009 5:00 pm Post subject:

P3UNG · Posted: Wed Mar 25, 2009 6:30 pm Post subject:

well is a DM cs3 about 6mths...so i doh think he wanna hear bout repairing or buyin another.

thnx on the info..

ronsin1 · Posted: Wed Mar 25, 2009 6:54 pm Post subject:

venum · Posted: Thu Mar 26, 2009 8:44 am Post subject:

^^^ i mean the one i saw