CAR NOT REVERSING NEED HELP !

^^!SPAWN!^^ · Posted: Sat Nov 07, 2009 3:46 pm Post subject: CAR NOT REVERSING NEED HELP !

Guys i have a problem with my AD

When putting it in reverse it not going back only revving and the car remaining one spot , the other gears working like drive , also I notice the overdrive button was blinking constantly for a while then stopped , can anyone help me here ?

3 people tell me the transmission gone .

Can anyone clarify ?

praise · Posted: Sat Nov 07, 2009 4:39 pm Post subject:

Do a scan first to see if any sensor is bad or malfunctioning. If after scanning the car no sensor is bad, replace with a foreign used one.

megadoc1 · Posted: Sat Nov 07, 2009 6:44 pm Post subject:

carry it by the transmission man $800 to repair normal thing with early ad 1.3s

ssankar · Posted: Sat Nov 07, 2009 7:06 pm Post subject:

transmission gone

D_bodyguard · Posted: Sat Nov 07, 2009 7:24 pm Post subject:

lol ...tranny gone !!

brams112 · Posted: Sat Nov 07, 2009 11:06 pm Post subject:

sounds like transmission gone to the dogs

D_bodyguard · Posted: Sun Nov 08, 2009 7:30 am Post subject:

flush the transmission and see if it helps .....also smell the dipstick to see if it smells burned ....

booge · Posted: Sun Nov 08, 2009 8:03 am Post subject:

Breddo, from my experience most of the times its the tranny needing to be replaced. Dont waste time or money. Check a transmission person and swap and go

legendkiller@1891 · Posted: Sun Nov 08, 2009 12:26 pm Post subject:

yep the reverse gear gone through buying a kit to rebuild would be more expensive than buying a new tranny..

rollingstock · Posted: Sun Nov 08, 2009 12:56 pm Post subject:

before changing the tranny get it scanned, could be a bad solenoid, but most likely tranny needs changing, can't hurt to get the vehicle scanned though because the blinking overdrive light indicates somethings wrong with the tranny.

D_bodyguard · Posted: Sun Nov 08, 2009 1:11 pm Post subject:

^^yup freal !!

A33_VQ35 · Posted: Mon Nov 09, 2009 11:53 am Post subject:

Just a point to note, reverse is not affected by solenoids, it is purely a hydraulic gear, so if it not working checking 4 solenoids not goin 2 get it to work. Either way it has to come down.

I talking from experience with this same problem. I could only go forward not reverse, an that was a beyotch!!! U never realise how important reverse is until u don't have it.

Simple answer: rebuild or replace

Anil_Sooknanan · Posted: Mon Nov 09, 2009 5:52 pm Post subject:

[quote="A33_VQ35"]Just a point to note, reverse is not affected by solenoids, it is purely a hydraulic gear, so if it not working checking 4 solenoids not goin 2 get it to work. Either way it has to come down.

I talking from experience with this same problem. I could only go forward not reverse, an that was a beyotch!!! U never realise how important reverse is until u don't have it.

Simple answer: rebuild or replace[/quote]

so wait you didn't believe it when i told you this exact same thing. Rolling Eyes

^^!SPAWN!^^ · Posted: Mon Nov 09, 2009 5:55 pm Post subject:

Yeah anil
but i post this up before I ask yuh