aye tuners this forum cold look inside

Slayer · Posted: Sat Nov 29, 2008 2:28 am Post subject:

yeh ah ketch it lol plus nobody really cares anyway, just my contribution to the forum

i want allyuh to know d kinda parts available when ur doing ur project if u look.
teamswift.net is da bomb

i wish i could show wat a good turbo gti could do.....alas.......imagine 2 bars on a gti!! Shocked

maybe sumtime soon, no tracton as it is lol

n katastrophic, 'rolla lights dude, with HID's u never go back to normal swift lights

xxSTAY TUNEDxx · Posted: Sat Nov 29, 2008 11:00 pm Post subject:

Slayer, all i have to say is youre the man, and keep up the good work. Cool

azoturbo · Posted: Mon Dec 01, 2008 7:50 am Post subject:

Slayer, to be honest i find i get more info on redlinegti than team swift and i now trying wheels Jamaica oh what the hell i get more info from u and ban, dred i trying 2 call u but u en answering your mc phone my guage (rpm) not reading right when garth knock it it droppin,i thought my car used 2 idle at 1200 is the blasted guage reading wrong does my coil need 2 change awah?

fellas bring pics and thanks for the replies we bringing the zuki forum back
update on mods - b and g lowering springs (thanks katastrophic,)

Slayer · Posted: Mon Dec 01, 2008 11:16 pm Post subject:

redlinegti real good too, but i just accustomed to teamswift.............i was having the same problem, but it was affecting the entire instrument cluster, turned out to be the ground wire loose (the one just below the stereo) wat u could check too is the noise supressor its on the brown wire coming from the ignitor, i fiddled with that once n it screwed up my tach....ask suren to show u where it is sometime or if i get chance ill show u

stay tuned, thanks man, wats going on with the car? BTM stopped the pinging?

sumbody needs to put down a low 13's high 12's with a g13b n show that this 1300 can run with the big boys......ancil, stay tuned, azo, aron... anybody

xxSTAY TUNEDxx · Posted: Mon Dec 01, 2008 11:35 pm Post subject:

Slayer, BTM stopped the pining thanks for the tach adapter..
as for who will show what the G13b is cpable of i'm sure you can do a low 13's high 12's, just up the boost to 12psi and some slicks and some practise runs and i'm sure they will know what our little pocket rockets are capable of.....
Besides with the mods you have listed there i'm pretty sure on 10psi and tuning you should have around 200hp or a little more... Twisted Evil

aidan · Posted: Tue Dec 02, 2008 12:40 am Post subject:

aye, a new thread in d zuki forum.

Slayer,my goodness Shocked

gt4tified · Posted: Tue Dec 02, 2008 2:24 am Post subject:

Slayer, you're a true inspiration to the rest of us man! Did you always have intentions of boosting the car or did you just modd till you couldn't squeeze any more out of the natural aspiration?

My ride:

Suzuki Swift GL 5door hatch
New NGK V-Power plugs
New 8mm Plug wires
Castrol GTX 20W50
New bushings
GTi springs
14" alloys with 185/60/14 Continentals (rear) and Goodyear (front)
Hoping to get a better transmission or a rebuild soon and then re-paint.
Mr. Green

Slayer · Posted: Tue Dec 02, 2008 2:36 pm Post subject:

gt4tified, i went through many phases with my car, after seeing what a turbo gti could do on the net, i went the boosted route

this little engine could take abuse!!

stay tuned, u know slicks gonna destroy that box, gimme that 4wd box n we'll see Very Happy

btw i'm awaiting ur hybrid........

i got 186 HP ATW on 9 psi with conservative tuning, so its 200+ at the crank
i was so happy with the numbers that i decided not to push it that day
but its really built to take bout 20 psi, a bit wary to push it though

im getting out of the racing thing tho, got a bit of a scare, plus no track so i'll never know i guess

katastrophic · Posted: Tue Dec 02, 2008 3:25 pm Post subject:

gt4tified, u tried the gti springs??? how they working???

azoturbo, no probs.... Mr. Green

gt4tified · Posted: Wed Dec 03, 2008 12:07 am Post subject:

azoturbo · Posted: Wed Dec 03, 2008 9:18 am Post subject:

we still waiting on pics dred
bring pics

azoturbo · Posted: Wed Dec 03, 2008 10:30 am Post subject:

QG · Posted: Wed Dec 03, 2008 6:44 pm Post subject:

azoturbo, up to your tricks again padna Laughing

azoturbo · Posted: Wed Dec 03, 2008 8:24 pm Post subject:

azoturbo · Posted: Thu Dec 04, 2008 2:30 pm Post subject:

were the fackin pics

xxSTAY TUNEDxx · Posted: Fri Dec 05, 2008 12:50 am Post subject:

azoturbo, the project will have to be put on hold till i get money or sponsors lol, i'm now an proud father Mr. Green

so my money will have other things to do for now.
but allyuh fellas could feel free to sponsor you know Laughing

.

azoturbo · Posted: Fri Dec 05, 2008 8:46 am Post subject:

Slayer · Posted: Tue Dec 09, 2008 2:57 pm Post subject:

azo, justin's car has parts from AVO turbo australia........with a pulsar T28 on a cast turbo manifold, without a management, torque is ridiculous for a 1300.....

Slayer · Posted: Tue Dec 09, 2008 3:17 pm Post subject:

my baby has a new colour scheme now....

QG · Posted: Tue Dec 09, 2008 10:31 pm Post subject:

azoturbo, you know the price for a GTi gearbox repair kit?

Supazuki · Posted: Wed Dec 10, 2008 11:12 am Post subject:

geeeze and ages swift men could show off ! doh mind i still dreamin of getting meh own gti one day.
oh and my ride - '99 Baleno upgrade the g13bb to the G16b. Not much in bling just some 15 chromes ( i eh boasting about the rubber is nexxen lol )
It works well and runs when needed although i not in that street racing ting.

aidan · Posted: Wed Dec 10, 2008 6:38 pm Post subject:

so allyuh have any ideas to decorate yuh car for Christmas? ah want to do sumtin to spread d Christmas cheer Very Happy

azoturbo · Posted: Thu Dec 11, 2008 9:52 am Post subject:

Slayer · Posted: Thu Dec 11, 2008 5:57 pm Post subject:

check aron, he has a knack for finding parts all over

note that you will get stock munroe shocks from mathura's st james or juterams in arima, not sure if the 4dr shocks is the same, but i think it could work

4dr swift cradle will work, a place on caroni savannah road had up til bout 2 mths ago, dunno if they have again

or check the usual, boodrams or rexcar

btw, yuh wanted pics, y is my pic the only one up?

azoturbo · Posted: Thu Dec 11, 2008 6:52 pm Post subject:

Slayer · Posted: Thu Dec 11, 2008 11:29 pm Post subject:

nice car!!

Jonathan · Street 2NR Joined: 18 Jul 2005 Tech posts: 52 My 2NRide:

Ay fellas yall got some nice rides here Smile

Haven't posted for a while, it's been a couple years oui!
I have a swift that's been boosted about 5 years now, here's some specs off the top of my head:

8.5 CR pistons with .030" overbore (slightly increased capacity Twisted Evil

)
Cast exhaust manifold
Garrett T25bb wc turbo
SR20DET downpipe
2.25" exhaust tubing
Full mandrel bent intake plumbing
Sparco hoses all round
TurboXS type-S BOV (cant remember exactly) Laughing

Link Engine management
Haltec A/F ratio meter
Ignition stock, but advanced to 15 degrees BTDC (stock is 7)

I'm only running 8psi, I dont see the sense in using more, traction problems and drivetrain longevity are a factor for me.. But dont get me wrong, this thing pulls!

Here's a teaser pic.. more to come later Wink

Slayer · Posted: Sun Dec 14, 2008 2:09 pm Post subject:

yeah jonathan this a better post to hijack lol!

your gti has got to be the cleanest turbo gti in t'dad!!

to answer your post, i posted my specs on page 2 of this post, it been a work in progress, did all the work on the car and engine by myself, with my dad's help, right down to building the manifold, thats my pride n joy lol

Click for full-size.

my homemade AVO turbo kit lol, n ur right more boost really makes no sense, will break tracton in at least three gears for u......

i thought you migrated didnt hear from you in a while. i think i met your dad once, in chaguaramas, drives a clean, white cultus, right?

post more pics

oh and another piece of fabricating im proud of, a dual downpipe

Jonathan · Street 2NR Joined: 18 Jul 2005 Tech posts: 52 My 2NRide:

Nice manifold man! Looks like it flows really well, good job! Mine is shorter and cast iron, but it positions the turbo so we can keep the AC, thank God! Laughing

Yup that's my dad, Chris is his name. He drives the white swift, it's not a true cultus, but the cultus cams, intake manifold and exhaust manifold were installed. He also installed the 60mm throttle body. It runs pretty good for a N/A swift.

You could say we're a GTi family, lol! We own 3 swifts: 2 white non-turbos, and the red turbo one. We do all the work on them ourselves. And we even do work on other swifts for people who can't get the quality work done elsewhere!

I don't drive the red one as much these days since I bought another vehicle (corolla, don't laugh!) I wanted a more comfortable ride for all the traffic these days, can't blame a guy for that! Laughing

My dad drives the turbo one more than me these days, but I still consider it mine, lol! We've done alot of work between us tweeking and perfecting everything in that car, sort of a labour of love Embarassed

Here's some more pics

azoturbo · Posted: Sun Dec 14, 2008 3:51 pm Post subject:

Jonathan, or you is danny brother??? heard about this car nice i want to install a/c and turbo after