Anyone have any idea how to fit 3 12s in a trunk.

carfreak1024 · Posted: Tue Nov 03, 2009 10:08 pm Post subject:

what firewall sayin soundin like a good idea, i think i go explore this further. the thing is i en wanna spend all that much money on bigger subs because it en make sense doing that unless yuh goin to spend money on bigger amps, right now all i have to play with is 1500rms and that go be decent enough for those 3 12s thats why i wanted to go that route. But i guess i could always try the 2 options and in the end the most that go happen is that i end up with a spare sub.

Although the spare sub issue is what have meh doing this upgrade anyway.

brams112 · Posted: Tue Nov 03, 2009 10:10 pm Post subject:

boi a pair of square kickers 8'' and you on, it is not the size of the speaker now is the space it is going into,speakers should always be bought to fit into the space you have not guessing after the fact pallie,,,

Firewall · Posted: Tue Nov 03, 2009 11:44 pm Post subject:

my bad, (noyztoyz was right putting the 12" in a 1.5 cubic ported is pointless)

for some reason i thought that you were going with 3 10" so i used the specs for the 7510. the min airspace required for 1 7512 is 2 cubic. so you looking at something like 7.5 cubic total (before port and speaker displacement.)

if you want pass through and we could make some measurements Mr. Green

only way i see this working though is doing a common chamber and reinforcing the inside with glass, cause mdf bracing will take up valuable airspace.

DJ Q · Posted: Wed Nov 04, 2009 7:54 am Post subject:

noyztoyz · Posted: Wed Nov 04, 2009 11:45 am Post subject:

but the 3 12s off 1500rms will do a lot more than the 1 15 off the same power, and plus he said he has the subs already

carfreak1024 · Posted: Wed Nov 04, 2009 12:37 pm Post subject:

^^^ nah noyztoys all i have is 1 12". but i could get the other 2 quick.

carfreak1024 · Posted: Wed Nov 04, 2009 9:35 pm Post subject:

^^^^ and is how i have the power too eh, i have 3 2 channel amps.

slacker_jack · Posted: Wed Nov 04, 2009 10:33 pm Post subject:

what amps may I ask...

DJ Q · Posted: Thu Nov 05, 2009 4:56 am Post subject:

I hope those amps have low level in and out...

And three 500RMS amps will use more current & wires than 1 1500RMS amp

Firewall · Posted: Thu Nov 05, 2009 9:33 am Post subject:

carfreak1024 · Posted: Thu Nov 05, 2009 9:00 pm Post subject:

^^^^^^^ hey boi dai is what i go do yes, but i still wonderin if i could get meh 2 10s GTi louder than them 2 12s MTX, i know lower 4 sure bout louder i en sure about.

But is basically free so why not try.

slacker_jack · Posted: Thu Nov 05, 2009 9:24 pm Post subject:

what the hell did you do with you jbl amp? Confused

carfreak1024 · Posted: Thu Nov 05, 2009 9:56 pm Post subject:

i sold it boi, maybe the worst thing i ever did, it was the most powerful amp i ever had, and my bass was alot louder and deeper when i had it. If i had that amp or some like it now upgrading woulda never even cross my mind.

But as i said when i sold it, it didn't make sense keeping it to run on 6ohms.

slacker_jack · Posted: Thu Nov 05, 2009 10:09 pm Post subject:

ChristianRD · Posted: Fri Nov 06, 2009 12:07 am Post subject:

or msn messenger.

carfreak1024 · Posted: Sat Nov 07, 2009 3:42 am Post subject:

i mean i didint pipe it out eh, sold it for 2500 which aint that bad i mean is about 4000 for it new i think. But i paid alot less than that for it.