AE111 outer CV joint help

Anil_Sooknanan · Posted: Wed Nov 04, 2009 6:01 pm Post subject: AE111 outer CV joint help

where can i get a outer CV joint for the AE111. it's a 4AGE (black top)engine with 6 speed manual. i've check everywhere for it but people keep saying bring the old one but it's stuck in the knuckle and cannot come off don't matter if i try it on a Press. so anyone know where can i just go straight and ask for it and they know exactly what i need?. I've try the other AE joints but none works even the NZE

firehead.. · Posted: Wed Nov 04, 2009 8:12 pm Post subject:

Check trdboy on the forum...he might know where u can sorce it from and has lots of parts for the ae111.

buzz · Posted: Wed Nov 04, 2009 11:02 pm Post subject:

i have to admit this "bring d old one" line is utter BS

are shop owners going on guess work as to what part they order will work for particular vehicles?

ruffrider27 · Posted: Thu Nov 05, 2009 6:20 am Post subject:

try the rav 4 one its the same Very Happy

Anil_Sooknanan · Posted: Thu Nov 05, 2009 5:40 pm Post subject:

Anil_Sooknanan · Posted: Fri Nov 06, 2009 10:02 pm Post subject:

don't know if this will help but it's the AE111 corolla GT

turbohead · Posted: Mon Nov 09, 2009 9:52 pm Post subject:

hmmm... the outer joint stuck in teh hub but you got teh shaft out? those shafts are freaking hard to tap out from the shaft. is it the big joint? if so it have an axle man in warrenville opp marhsall trace, he might have a joint dat might work

trdboy · Posted: Tue Nov 10, 2009 1:27 pm Post subject:

i recently got mine from maruds in marabella. 250tt just tell em is the ae111.......i could lend u my old one if u want to carry it

turbohead · Posted: Tue Nov 10, 2009 10:51 pm Post subject:

das a best help dey an while at maruds dont forget to pick up one of them best girls there also.

trdboy · Posted: Wed Nov 11, 2009 12:44 pm Post subject:

Anil_Sooknanan · Posted: Wed Nov 11, 2009 5:11 pm Post subject:

trdboy, how can i contact you.turbohead, you won't believe how hard that thing is carried it and 2 press failed

turbohead · Posted: Wed Nov 11, 2009 9:37 pm Post subject:

we had a problem with an almera axle. wen by khali's machine shop an they got it out for us off teh spindle. try heatin an pressin it out. might have to change the wheel bearing after though. see how impotant grease is

Anil_Sooknanan · Posted: Wed Nov 11, 2009 11:16 pm Post subject:

i'm changing the whole knuckle, hey i need the rotor and caliper for the L.H.S too