| View previous topic :: View next topic |
| Author
|
Message |
TKO_69 Street 2NR
Joined: 03 Jul 2008 Tech posts: 46 Location: yuh damn fast!! My 2NRide: Toyota Corolla
|
Posted: Fri Nov 06, 2009 5:55 am Post subject: A little help please |
|
|
My car has the original paint on it except for a few touch ups from minor dents and scrapes that ocurred with the previous owner.
I've notice in areas where the original paint is some fine black specs that looks like fumes, don't know what caused them or what they are.
I've tried pitch oil (the car is white) and it removed some also tried mothers wax cleaner and some other 3M cleaner and hand glaze with hand and machine and there is still a slight amount of the fume like specs on the car.
Can anyone advise me on what I can do to get rid of them without repainting the entire car which I am very close to at the moment.
Again the car is white. |
|
| Back to top |
|
 |
|
|
 |
Rory Phoulorie I LUV THIS PLACE
Joined: 28 Jun 2006 Tech posts: 931 Location: Trying to bypass the speed cut of 76km/h (47mph) My 2NRide: Land Rover Series II
|
Posted: Fri Nov 06, 2009 6:01 am Post subject: |
|
|
| Try using a Mothers Clay Bar. |
|
| Back to top |
|
 |
THE SYNDICATE TriniTuner 24-7
Joined: 13 Feb 2007 Tech posts: 1804 Location: Drowning My Sorrows With a Cold HEINEKEN.... My 2NRide: Nissan B12 Sentra
|
Posted: Fri Nov 06, 2009 6:37 am Post subject: |
|
|
my car has some fumes looking thing just like that,after it was painted(white as well).it looked like if it's fungus lol
i used some prestone polish and it came off....not all but most! |
|
| Back to top |
|
 |
THE SYNDICATE TriniTuner 24-7
Joined: 13 Feb 2007 Tech posts: 1804 Location: Drowning My Sorrows With a Cold HEINEKEN.... My 2NRide: Nissan B12 Sentra
|
Posted: Fri Nov 06, 2009 6:38 am Post subject: |
|
|
my car has some fumes looking thing just like that,after it was painted(white as well).it looked like if it's fungus lol
i used some prestone polish and it came off....not all but most! |
|
| Back to top |
|
 |
sigma-turbo 3NE 2NR for life
Joined: 06 May 2009 Tech posts: 179 Location: Australia My 2NRide:
|
Posted: Fri Nov 06, 2009 7:30 am Post subject: |
|
|
| Rory Phoulorie wrote: | | Try using a Mothers Clay Bar. |
yeah clay bar works a treat |
|
| Back to top |
|
 |
brams112 3NE 2NR for life
Joined: 15 Jul 2008 Tech posts: 114 Location: trinidad My 2NRide:
|
Posted: Fri Nov 06, 2009 9:25 pm Post subject: |
|
|
wrong preparation,some paint finish need a non staining filler and primer,also if the painter did not bleed out the air tank or don't have a water separator is real trouble,,,,,hope is not this problem you got pallie,,,,,,,,,,,,,repaint  |
|
| Back to top |
|
 |
|
|
|