3s again my problem

[rocketboy]

http://forums.trinituner.com/upload/20091111102608_h.JPG

http://forums.trinituner.com/upload/P071109_15.50_01.jpg







ok corolla guys this is my ride just got it so things are in the making any suggestios ideas pointers you all can give a young brother plz. my left axle jump out lastnite while making a u turn by mova gas station i need some advice on this plz and some suspension advice to strengthen the back thank u

[A172]

looking good

turbocharge it

[trdboy]

u could use levin suspension for the back! double wishbone and stabilizer pin type!! for the front since its a 3s go on a ramp and check the clearance of the crankcase to the crossmember, if its less then half inch you could either put washers on the back mount or do what i did make a 1 inch plate for the top engine mount which raises the engine, sometimes when the engine drags it vibrates on the crossmember especially cornering and up hill, the result is it puts strain on the axels and well u see the end result!

[rocketboy]

Thanks a mil Tre boy finally info I can use so de parts u jus call can I get a estimate on how much it costs

[rocketboy]

Lol a172 na I prefer it na

[AllTrac]

rolla looks nice

[rocketboy]

tanks well i got the problem fixed now so the car works fine

[AE101Jun]

which gen 3SGE is that BTW? 2nd or 3rd? when I had my rolla transplanted with the 4th gen 3SGE, had to use axles from a Corona as well as change my crossmember. had the battery relocated as well. best thing for us are coilovers, atleast you can dial in the best settings for you car since the weight distribution pretty much is way biased towards the front, thus bottoming out might be a problem.

here's some pics as well.









here she is now..

[trdboy]

what crossmember did u use?