300hp NA build

kezay · Posted: Thu Sep 18, 2008 2:52 pm Post subject: 300hp NA build

I have choosen to share my build with fellow members. I will post pictures of the parts as they are assembled and dyno figures finally. My goal is 300whp and 220+lb to be done on Audi's dyno. This will be installed in my civic which after must make a clean 12 sec pass on all motor. (No nitrous, no turbo). I will be doing the entire assembly & tuning & driving. I know that my goals are gonna be very hard to achieve but I will try my best.

Anyways specs:
K24A1 sleeved block (Thanks to Sean @ ERL)
K24A1 crankshaft modified by castillo crank specialist.
Wiseco 90mm custom pistons (compression confidential)
IB Spec All Motor Rods (Thanks Jeff@IB)
Modified S2000 oil pump
Cometic 90mm Headgasket (Stock .030 mls)
ARP headstuds
Toda ITB's
750 RC injectors
PRC Cylinder head ported by Port Flow ( 340 CFM)
Skunk2 V3 Stg 3 Cams (Thanks to Tony@Skunk2)
Skunk2 Dual valve Spring & Ti retainers
Custom 4-2-1 Stainless Steel 3" Hytech header (Thanks John)
Skunk2 76mm Stainless Steel exhaust system.
AEM EMS (30-1030)
DC5 TypeR 6sp (custom gearatio) with 5.06 Final drive
DSS level 2.9 axles (Thanks Lee@Drive Shaft Shop)
Competition Clutch 6 puck sprung clutch.

I hoping to get the engine running by mid Oct. so that I can just switch out the temporary K20 that is in the car now.

red_dragon · Street 2NR Joined: 08 Apr 2004 Tech posts: 84 My 2NRide:

^ good luck with the task ahead
Bless

smooth14 · Posted: Thu Sep 18, 2008 3:16 pm Post subject:

^^

what car you puttin that in?

kezay · Posted: Thu Sep 18, 2008 3:22 pm Post subject:

ES1 (2003 Civic)

TrEnD$eTt@ · Posted: Thu Sep 18, 2008 3:31 pm Post subject:

Kezay how much HP did the last frank build net ?

kezay · Posted: Thu Sep 18, 2008 3:33 pm Post subject:

It made 230whp and 197lb @ 8000RPM and ran 14sec flat @ camden. I think I still have the dyno sheet somewhere around. But I am glad that I went that route because I have learned alot from that build which I will use this time to improve the numbers.

SUPAstarr · Posted: Thu Sep 18, 2008 3:37 pm Post subject:

nice hope to the build works out, i see you and the car every afternoon, on Jerminham Ave , and on the way up from chaguanas on a morn. Im in a GOLD ES8 for now

TrEnD$eTt@ · Posted: Thu Sep 18, 2008 3:39 pm Post subject:

but isnt that hp and tq figure higher than Honda Hoes stock k20.....why was he always in front of you?

kezay · Posted: Thu Sep 18, 2008 3:42 pm Post subject:

Myself and hoe ran twice and on both occasions my car wasn't working good, He win and I lose. But to avoid this thread going to the dogs that's not the issue here.

TrEnD$eTt@ · Posted: Thu Sep 18, 2008 3:49 pm Post subject:

Good luck with your build hope you do it right this time ...the whole of Plesantville cheerin yuh orn... Very Happy

abbow · Posted: Thu Sep 18, 2008 4:08 pm Post subject:

go kezay...saw you distressing a boosted ek some evening ago....gl man

b18b_turbo · Posted: Thu Sep 18, 2008 4:11 pm Post subject:

y an ES? Drop it in a hatch bro! especially since you trying to get that time without forced induction!

red_dragon · Street 2NR Joined: 08 Apr 2004 Tech posts: 84 My 2NRide:

^ the man wanna be different

12s in the ES bottom line Twisted Evil

3stagevtec · Posted: Thu Sep 18, 2008 6:17 pm Post subject:

now that's a parts list... good luck on achieving the NA 300...

Cleriq · Posted: Thu Sep 18, 2008 6:46 pm Post subject:

The man let the cat out the bag yes! Very Happy

Just the final drive or you change some gears too?

red_dragon · Street 2NR Joined: 08 Apr 2004 Tech posts: 84 My 2NRide:

cat is 200whp
lion is 300whp

right now I at kitten stage Blast u Kezay

ksimon · Posted: Thu Sep 18, 2008 7:40 pm Post subject:

wen I say KEZAY is D man, ppl does be like " Rolling Eyes

"what a kiss ass" ...now all yuh cld see why i always rate up the man....his knowledge of HONDA is amazing.....gd luck with yuh project bro,... I fine wen he goin down to buss that 12second pass, the whole honda faternity should be there to give support..... Very Happy

VexXx Dogg · Posted: Thu Sep 18, 2008 9:15 pm Post subject:

wow.

nice parts list.
props to ya, this sounds like an impressive build.

kezay · Posted: Thu Sep 18, 2008 11:13 pm Post subject:

kezay · Posted: Fri Sep 19, 2008 12:27 am Post subject:

Here are the cams

Click for full-size.