18 sound, RCF or B&C

pioneer · Posted: Wed Aug 19, 2009 10:31 pm Post subject:

says who?

noyztoyz · Posted: Wed Aug 19, 2009 10:36 pm Post subject:

not familiar a lot with components, so pioneer, what component setup will you recommend to put on a backdash to be equivalent to the sound output of 2 rcf 10s and 850 drivers?

pioneer · Posted: Wed Aug 19, 2009 10:53 pm Post subject:

bagogalant · Posted: Wed Aug 19, 2009 11:08 pm Post subject:

lol he didn't kill it man. now i wanted to keep the doors stock so i was thinking of using 6s on the doors. so should i go B&C 10s with drivers or RCF 10s with drivers?

pioneer · Posted: Wed Aug 19, 2009 11:22 pm Post subject:

so what's the point of puttin speakers that only play a certain musical range?

bagogalant · Posted: Wed Aug 19, 2009 11:34 pm Post subject:

pioneer elaborate please Rolling Eyes

noyztoyz · Posted: Wed Aug 19, 2009 11:49 pm Post subject:

hey man i use bandc ios with rcf n850 drivers and its extremely loud, it doesnt make sense fighting over the decision between bandc and rcf if youre going to feed the pair under 1000rms.
If you could afford a more powerful mids amp that will give over 1000rms, go the rcf they handle the power better, i have a couple amps like this.

pioneer · Posted: Wed Aug 19, 2009 11:49 pm Post subject:

post specs of de speakers you plan to use...

bagogalant · Posted: Thu Aug 20, 2009 12:21 am Post subject:

toyz so you have rcf 10s

noyztoyz · Posted: Thu Aug 20, 2009 12:22 am Post subject:

if u from tobago and having trouble to get it, i can give u a link to get them, but if u need the amps to run them i have a variety that will blow them away

bagogalant · Posted: Thu Aug 20, 2009 12:27 am Post subject:

you obviously know toyz we ent have nobody selling bandc or rcf in bago.pm me the link and the amp with prices

noyztoyz · Posted: Thu Aug 20, 2009 12:37 am Post subject:

you dont have any amp as yet?

look at the 2 channel section of this tred for the best amps available in the world right now to handle those tens

http://forums.trinituner.com/forums/viewtopic.php?p=3270508#3270508

noyztoyz · Posted: Thu Aug 20, 2009 12:39 am Post subject:

or if u dont know much about this, i do you can call me at 7198606 and ill tell u what u need to know.

(u can call in the next 5 minutes if u want) lol

(...Rovin...) · Posted: Thu Aug 20, 2009 10:05 am Post subject:

pioneer, dont bother to waste ur time , there is a mindset among alot of guys these days that once u say mids\highs they automatically think its 2 bullets . drivers , M&M , 18s , selenium . rcf etc since just being loud is mostly what they concerned with , if thats what they want just let them do their thing ........ Neutral

ejimmy · Posted: Thu Aug 20, 2009 1:36 pm Post subject:

i see u fellas have some problems with the pro audio speakers
so like what noyztoyz asked above

"not familiar a lot with components, so pioneer, what component setup will you recommend to put on a backdash to be equivalent to the sound output of 2 rcf 10s and 850 drivers?"

what is the answer for this question,
if u want me to run components to compete against my buddy's 2 10s and 2 drivers(rcf)
tell me what to put?
it has to go on a backdash to point out the car obviously because we only listen to loud music from outside the car.
what do i need to beat him?

pioneer · Posted: Thu Aug 20, 2009 1:49 pm Post subject:

(...Rovin...) · Posted: Thu Aug 20, 2009 1:52 pm Post subject:

well at least he said it upfront that his set is for out of car than in car enjoyment - some ppl thats what they build their music for , cant kill them for dat

so ejimmy , what kind of amps \ deck \ processing ur padna has for his RCF 2 10s & drivers ?

if is some lame equipment all u have to do is use better equipment , better install , tune it in better than him & make sure u have steady current to supply d equipment : thats all ... Cool

pioneer · Posted: Thu Aug 20, 2009 2:05 pm Post subject:

then is bess he rent ah mic

bagogalant · Posted: Sat Aug 22, 2009 7:39 am Post subject:

Well toyz i am putting up specs for the speakers and not mics as pioneer would say. My honest opinion is that we are discriminated against so much because we tend to use PROFESSIONAL TRANDUCERS rather than components. PRO AUDIO requires a keen and deep appreciation for music and sound,knowledge of tonal harmonics and frequency overlapping,instrumental tone reproduction i.e percussion instrum. brass, wind instrum. etc. and last but not least a TRUE PASSION FOR GOOD QUALITY SOUND being reproduced in the best way possible. King ferdinand and Queen isabel along with the rest of the world in the fifteenth century thought the world was flat until they were thought otherwise. So instead of joking about bad talking 'Gallery sound' appreciate the ingenuity of a generation that can tune a 30 band equalizer down to an octave in an automobile! Remember when you all came out with components the seniors to you all with their 8 track cassette decks in their falcons and hillmans with white- wall-tires and analog instrument panels had their say too. Choose to understand and be different or as we say in Bago, Bess yuh nah seh nuttin if yuh affih pan nuh nuh know Cool

bagogalant · Posted: Sat Aug 22, 2009 8:00 am Post subject:

[url]http://www.rcf.it/en_US/web/rcf/products/precision-transducers/low-frequency-transducers/l10-750yk

[/url]http://www.bcspeakers.com/product.php?id=0000000055

[url]http://www.rcf.it/en_US/web/rcf/products/precision-transducers/compression-drivers/n850

[/url]http://www.bcspeakers.com/product.php?id=0000000042